PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-200 SMART
- 6ES7288-0ED10-0AA0
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A 24 V DC supply for the S7-200 SMART environment
Siemens 6ES7288-0ED10-0AA0 identifies the PM207 5 A power supply in the S7-200 SMART catalogue. It converts the documented AC input into a nominal 24 V DC output, providing a dedicated power source rather than CPU processing or I/O functions.
The PM207 5 A version has an adjustable DC output, electronic short-circuit protection and an IP20 housing for 35 mm DIN-rail mounting. Its output rating, connection arrangement and installation requirements must be matched to the connected control equipment, independently of the SMART CPU's own resources.
The PM207 5 A version has an adjustable DC output, electronic short-circuit protection and an IP20 housing for 35 mm DIN-rail mounting. Its output rating, connection arrangement and installation requirements must be matched to the connected control equipment, independently of the SMART CPU's own resources.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Industrial Production and Service Sectors
These industry examples describe Siemens' broader market coverage, not verified installations of this exact product. Product suitability depends on the documented configuration and engineering requirements.
-
01 · WATER & WASTEWATER
Drinking Water and Wastewater Services
Drinking water production for public and community supply services.Wastewater treatment serving households, communities and industrial water users. -
02 · FOOD & BEVERAGE
Edible Oil and Sugar Production
Edible oil production and processing across the food manufacturing sector.Sugar manufacturing and processing within the commercial food industry. -
03 · PACKAGING
Pharmaceutical and Non-food Packaging
Pharmaceutical product packaging within the medicines and healthcare sector.Non-food product packaging across consumer goods and industrial markets.
Technical specifications for 6ES7288-0ED10-0AA0
-
Product Model6ES7288-0ED10-0AA0
-
Product ParametersPM207 Regulated Power Supply
-
ManufacturerSiemens
-
Permitted AC input85 to 264 V AC
-
Rated line frequency50/60 Hz
-
Nominal DC output24 V DC
-
Output adjustment range22.8 to 26.4 V DC
-
Rated output current5 A
-
Parallel configurationSupported; follow applicable configuration instructions
-
Electronic short-circuit protectionProvided
-
Line-harmonic suppressionListed according to EN 61000-3-2
-
Ingress protectionIP20 according to EN 60529
-
Mounting35 mm DIN rail
View all additional
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
REGULATED CONTROL POWER
Keep supply capacity separate from controller resources
PM207 supplies DC power; it does not add program memory, communication ports or I/O channels to a SMART CPU. The 5 A model should be selected from the actual load requirements and the documented voltage settings, rather than being treated as an interchangeable controller accessory.
The catalogue provides a nominal 24 V DC output and an adjustment range of 22.8 to 26.4 V DC for this model. Check the connected equipment before choosing the setting, and keep output-current demand separate from the CPU's internal sensor-power and expansion-bus budgets.
Electronic short-circuit protection, line-harmonic suppression and parallel-configuration capability are listed features of the supply. The technical table is not a complete installation procedure, however; cabinet protection, connection details and any parallel arrangement still require the applicable manufacturer instructions and an assessment of the installed loads.
Features:
- Dedicated 24 V DC supply
- Adjustable output voltage
- Documented protection features
The Siemens 6ES7288-0ED10-0AA0 requires the documented hardware configuration, installation conditions and interface arrangement to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the complete 6ES7288-0ED10-0AA0 ordering number and PM207 5 A marking before selecting a spare. The catalogue separates 3 A, 5 A and 10 A products, and their current ratings and physical dimensions are not identical merely because the front labels share the PM207 family name.
Compare the required output setting and connected load with the replacement specification before commissioning. Preserve the installation's input and protective arrangements, and check the actual unit label against the relevant documentation. Nominal input, permitted input range and the adjustable output setpoint describe different limits and must be checked separately.
Verify the 35 mm DIN-rail mounting arrangement and the applicable IP20 installation conditions before returning the supply to service. A power-supply exchange does not establish the condition or availability of cables and mounting hardware, and the published device dimensions must not be reused as packed shipping dimensions.
Features:
- Exact current-rating match
- Input and output comparison
- Mounting and protection review
The Siemens 6ES7288-0ED10-0AA0 requires replacement verification based on its complete order number, installed hardware, signal configuration and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.Features:
- Exact-model manufacturer data and relevant original manual pages
- Verified manufacturer product reference; separate installation document not supplied
- Accessories and supplied documentation follow the written quotation
Documentation for the Siemens 6ES7288-0ED10-0AA0 includes an independent technical summary and selected original manufacturer pages; check the applicable document edition against the delivered product and approved installation documentation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm final packed dimensions
-
Shipping weightConfirm final packed weight
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504401400
-
OriginConfirm supplied-unit origin
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7288-0ED10-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is 6ES7288-0ED10-0AA0 a programmable controller?
No. The exact ordering number identifies the PM207 5 A power supply. Its documented role is to provide a nominal 24 V DC output for the SMART environment; CPU execution and I/O processing are separate functions. -
What distinguishes the 5 A PM207 version?
The catalogue lists separate 3 A, 5 A and 10 A order numbers. This 0ED10 model is rated 5 A at nominal 24 V DC. A shared PM207 name does not establish identical output capacity or housing dimensions. -
Can its output voltage be adjusted?
The PM207 5 A column specifies a 22.8 to 26.4 V DC adjustment range. Select a setting suitable for the connected equipment and follow the applicable connection and commissioning instructions. -
What AC input range is specified?
The catalogue specifies an 85 to 264 V AC permitted range and 50/60 Hz rated line frequency. Verify the offered unit's input label before connection and distinguish its nominal marking from the permitted operating range. -
Does the catalogue list short-circuit protection?
Yes, electronic short-circuit protection is listed for the PM207 range. The catalogue does not establish a complete installation or fault-recovery procedure, so this feature should not be treated as permission to omit protective measures required by the installation. -
Can PM207 supplies be connected in parallel?
The catalogue marks parallel configuration as supported. It does not provide the complete connection procedure on the technical table page; confirm the applicable manufacturer's instructions and load-sharing arrangement before planning a parallel installation. -
How is this supply mounted?
The specified mounting method is a 35 mm DIN rail and the housing is rated IP20. The catalogue dimensions describe the device, not packaging or a complete required-clearance envelope.
READY TO VERIFY YOUR PART?
Get a 6ES7288-0ED10-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6ES7288-0ED10-0AA0PM207 Regulated Power SupplyManufacturer: SiemensView Details
-
6ES7288-1SR40-0AA1CPU SR40 Relay ControllerManufacturer: SiemensView Details -
6ES7288-5CM01-0AA0Serial communication signal boardManufacturer: SiemensView Details
-
6ES7288-3AR04-0AA0S7-200 SMART four-channel RTD input moduleManufacturer: SiemensView Details -
6ES7288-1SR40-0AA0CPU SR40 Relay ControllerManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
