PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-200 SMART
- 6ES7288-6EC01-0AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A one-meter bus link for the SMART station layout
Siemens 6ES7288-6EC01-0AA0 is the one-meter I/O expansion cable listed for S7-200 SMART. Its male and female bus connectors connect separated parts of the expansion arrangement, allowing a documented alternative to positioning every connected module directly beside the preceding device.
The manual permits one expansion cable per CPU system, either between the CPU and its first expansion module or between two expansion modules. Connector retention and strain relief are part of the installation guidance, particularly where the mounted equipment can move or vibrate.
The manual permits one expansion cable per CPU system, either between the CPU and its first expansion module or between two expansion modules. Connector retention and strain relief are part of the installation guidance, particularly where the mounted equipment can move or vibrate.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Industry directions within Siemens micro-automation
Portfolio-level industry scope; cable selection still depends on the documented SMART station arrangement.
-
01 · AUTOMOTIVE COMPONENTS
Automotive Components
Automotive supplier manufacturing and finishing for established vehicle markets.Component production and assembly across commercial automotive supply businesses. -
02 · FOOD & BEVERAGE
Food & Beverage
Food manufacture and packaging within established consumer product businesses.Beverage processing and preparation across commercial food production operations. -
03 · TEXTILE MANUFACTURING
Textile Manufacturing
Textile production and conversion for industrial and consumer markets.Fabric preparation and finishing within commercial textile supply businesses.
Technical specifications for 6ES7288-6EC01-0AA0
-
Product Model6ES7288-6EC01-0AA0
-
Spare ModelS7-200 SMART extension cable
-
Product ParametersOne-Meter I/O Expansion Cable
-
In stock1 unit
-
ManufacturerSiemens
-
Cable length1 m
-
Connector arrangementMale and female I/O-bus connectors
-
Maximum per CPU system1 expansion cable
-
Permitted positionBetween CPU and first expansion module, or between two expansion modules
View all additional
Alternative Names
Siemens S7-200 SMART extension cable
SIMATIC S7-200 One-metre extension cable
S7-200 6ES7288-6EC01-0AA0
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
STATION LAYOUT CONNECTION
Separate the physical arrangement while keeping the permitted bus order
The one-meter cable provides a defined way to separate parts of the S7-200 SMART expansion arrangement. Siemens permits the link between the CPU and first expansion module or between two expansion modules. The cable changes the physical layout, not the identity or order of the station components.
Only one expansion cable is allowed per CPU system. Check that restriction against the proposed arrangement before using the available length as a layout solution. The host CPU must still support expansion modules; a cable does not establish compatibility for a CPU whose architecture excludes them.
The male and female ends engage the corresponding bus connectors described by Siemens. Secure mounting and strain relief matter because movement can loosen the connection. The installation guidance requires power isolation, careful connector engagement and avoidance of excessive pulling force, rather than treating the link as a loose patch lead.
Features:
- One-meter physical-layout flexibility
- One-cable system restriction
- Retained and strain-relieved bus connection
The Siemens 6ES7288-6EC01-0AA0 requires the documented hardware configuration, installation conditions and interface arrangement to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Identify 6ES7288-6EC01-0AA0 and compare the documented one-meter length with the installed route. A programming cable or a general network lead is a different item, even if it is also listed for S7-200 SMART. Preserve the intended location within the expansion-module chain.
Inspect both connector ends and the mounting arrangement before replacing the cable. Siemens identifies separate male and female bus connections with retaining latches. Any movement of the connected modules or missing strain relief should be assessed against the installation guidance rather than attributed automatically to an electrical cable fault.
Keep the one-cable-per-CPU restriction and the host CPU's expansion support in view when checking a replacement. Qualified personnel must isolate the CPU and related equipment before removal or installation. After fitting, verify engagement and the cable-module connection without assuming that the part number alone confirms the complete installation.
Features:
- Full cable identity and length
- Connector and mounting inspection
- Host expansion limits preserved
The Siemens 6ES7288-6EC01-0AA0 requires replacement verification based on its complete order number, installed hardware, signal configuration and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
Features:
- Exact-model manufacturer data and relevant original manual pages
- Verified manufacturer product reference; separate installation document not supplied
- Accessories and supplied documentation follow the written quotation
Documentation for the Siemens 6ES7288-6EC01-0AA0 includes an independent technical summary and selected original manufacturer pages; check the applicable document edition against the delivered product and approved installation documentation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm final packed dimensions
-
Shipping weightConfirm final packed weight
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference854442
-
OriginConfirm supplied-unit origin
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7288-6EC01-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the documented length of this cable?
The exact ordering-code table gives a length of 1 m. It does not provide a cable-extension allowance or authorize joining multiple cables to increase that length. -
Where can it be placed in the SMART station?
Siemens permits it between the CPU and first expansion module, or between two expansion modules. The selected position should preserve the station's documented expansion order. -
Can two of these cables be used with one CPU?
The S7-200 SMART installation section allows only one expansion cable per CPU system. Do not infer a larger allowance from the number of expansion modules supported by the CPU. -
Is this a USB/PPI programming cable?
No. This ordering code is the I/O expansion cable. Siemens lists USB/PPI and RS-232/PPI programming cables under separate order numbers and a different technical section. -
What connector-retention checks matter in a vibrating installation?
The manufacturer warns that movement or poorly secured modules can loosen the ends. Follow its strain-relief guidance, avoid excessive pulling force and verify the connector engagement after installation. -
Does the cable make a non-expandable CPU support expansion modules?
No such capability is established. The cable changes the permitted physical layout of an expansion connection; the CPU's own expansion support and system limits still apply. The manual excludes compact CRs models from expansion-module use. -
Is the documented 80 g the packed shipment weight?
No. It is the cable weight in the technical table. Packaging, accessories and dispatch mass have not been verified and should be confirmed separately for the supplied order.
READY TO VERIFY YOUR PART?
Get a 6ES7288-6EC01-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6ES7288-6EC01-0AA0One-Meter I/O Expansion CableManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
