PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-200
- 6ES7231-7PB22-0XA8
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7231-7PB22-0XA8 EM 231 two-channel RTD input module
Siemens 6ES7231-7PB22-0XA8 is an EM 231 analog input expansion module for SIMATIC S7-200 controllers. It is designed for temperature and resistance measurement through two sensor channels. The manufacturer data further identifies the system family as SIMATIC S7-200, the module designation as EM 231, the module type as RTD/resistance analog input, the analog inputs as 2, the supported measurement as Temperature and resistance, the sensor families as Pt, Ni and Cu, and the input signal as RTD and resistance.
The two inputs support RTD and resistance signals from documented Pt, Ni and Cu sensor ranges. Signal conversion uses 15-bit resolution plus sign and the module operates from a 24 V DC supply. The remaining technical data identifies the resolution as 15 bit plus sign, the supply voltage as 24 V DC, the signal direction as Field to controller, the controller interface as S7-200 expansion bus, the channel function as Two sensor measurements, the conversion type as Analog-to-digital, the station role as Analog input expansion, and the application class as Temperature acquisition.
The two inputs support RTD and resistance signals from documented Pt, Ni and Cu sensor ranges. Signal conversion uses 15-bit resolution plus sign and the module operates from a 24 V DC supply. The remaining technical data identifies the resolution as 15 bit plus sign, the supply voltage as 24 V DC, the signal direction as Field to controller, the controller interface as S7-200 expansion bus, the channel function as Two sensor measurements, the conversion type as Analog-to-digital, the station role as Analog input expansion, and the application class as Temperature acquisition.
BEFORE YOU BUY
Confirm the complete EM 231 two-channel RTD input module
ACTUAL APPLICATIONS
Application fields for 6ES7231-7PB22-0XA8
6ES7231-7PB22-0XA8 is used across compatible installations in the following broad industrial application fields, subject to verified system design and operating requirements.
-
01 · FOOD & BEVERAGE
Food Production and Beverage Manufacturing
Food ingredient and packaged-product manufacturingBeverage and hygienic process operations -
02 · PHARMACEUTICALS
Pharmaceutical and Life Science Manufacturing
Pharmaceutical formulation and productionBiotechnology and life science manufacturing -
03 · COMMERCIAL BUILDINGS
Commercial and Institutional Building Operations
Commercial property operationsInstitutional facility services
Technical specifications for 6ES7231-7PB22-0XA8
-
Product Model6ES7231-7PB22-0XA8
-
Product ParametersEM 231 two-channel RTD input module
-
In stock1 unit
-
ManufacturerSiemens
-
System familySIMATIC S7-200
-
Module designationEM 231
-
Module typeRTD/resistance analog input
-
Analog inputs2
-
Supported measurementTemperature and resistance
-
Sensor familiesPt, Ni and Cu
-
Input signalRTD and resistance
-
Resolution15 bit plus sign
-
Supply voltage24 V DC
-
Signal directionField to controller
-
Controller interfaceS7-200 expansion bus
-
Channel functionTwo sensor measurements
-
Conversion typeAnalog-to-digital
-
Station roleAnalog input expansion
-
Application classTemperature acquisition
View all additional
Alternative Names
Siemens EM 231 two-channel RTD input module
SIMATIC S7-200
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7231-7PB22-0XA8 EM 231 two-channel RTD input module
Use 6ES7231-7PB22-0XA8 within the documented SIMATIC S7-200 automation architecture and assign it to the hardware position intended for its EM 231 two-channel RTD input module function. The controller project and physical station should use the same module identity and system structure.
Coordinate the rack or distributed I/O position with the controller address map, process image and diagnostic handling. Field wiring should follow the manufacturer terminal conventions, with signal references, grounding and shielding arranged consistently with the surrounding modules.
Complete the hardware configuration in the engineering project and review the station diagnostics before enabling the affected process functions. Retain the final module assignment, connection records and controller configuration as part of the system documentation.
Features:
- Exact model: 6ES7231-7PB22-0XA8
- Compatible system: SIMATIC S7-200
- Intended role: EM 231 two-channel RTD input module
6ES7231-7PB22-0XA8 should be integrated within the documented SIMATIC S7-200 system architecture and retained in the approved project records.
INTERCHANGEABILITY
Check 6ES7231-7PB22-0XA8 technical compatibility
Use the complete 6ES7231-7PB22-0XA8 order identity when evaluating interchangeability within the SIMATIC S7-200 system. Similar appearance or a shared family name does not establish compatibility with the installed hardware and engineering project.
Record the installed position, connector orientation, field wiring, address assignment, communication settings and application configuration before removing the existing unit. Preserve cable labels, shielding arrangements and diagnostic records needed to reproduce the documented system state.
After fitting the selected unit, restore the approved configuration and review controller or device diagnostics before enabling the affected function. Confirm the connected signals and controlled response through the established commissioning procedure, then update the maintenance record.
Features:
- Complete identity: 6ES7231-7PB22-0XA8
- System compatibility: SIMATIC S7-200
- Configuration and connection records retained
Interchangeability for 6ES7231-7PB22-0XA8 depends on the complete order identity and the documented electrical, signal and platform characteristics.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Match documents to the complete product identity
- Use the applicable manufacturer family instructions
- Additional documents are supplied only when quoted
Documentation for 6ES7231-7PB22-0XA8 must be checked against the installed configuration before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size8.6 × 10.0 × 7.0 cm
-
Net weight0.162 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538909900
-
OriginChina
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7231-7PB22-0XA8
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is 6ES7231-7PB22-0XA8?
6ES7231-7PB22-0XA8 is a EM 231 two-channel RTD input module for the SIMATIC S7-200. -
Which identity must be used when ordering 6ES7231-7PB22-0XA8?
Use the complete 6ES7231-7PB22-0XA8 marking and compare it with the installed label and project records. -
Can a similar family item replace 6ES7231-7PB22-0XA8?
Do not confirm substitution from a family name or similar appearance. Verify the complete code, interfaces, revision and approved configuration. -
What should be recorded before removing 6ES7231-7PB22-0XA8?
Record the installed position, connections, cable labels, settings and diagnostic state. -
What should be inspected when 6ES7231-7PB22-0XA8 arrives?
Inspect the label, housing, connectors, terminals and packaging for correct identity and condition. -
Which checks follow installation?
Restore the approved configuration and complete controlled power-up, diagnostic and functional tests. -
What information should accompany a quotation?
Provide the complete model, quantity, clear label photographs, destination and required delivery date. -
Which documentation applies?
Use the manufacturer documentation for SIMATIC S7-200 and confirm that its scope covers the installed configuration.
READY TO VERIFY YOUR PART?
Get a 6ES7231-7PB22-0XA8 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
