PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-300
- 6ES7326-2BF10-0AB0
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Ten fail-safe outputs with grouped power and diagnostic supervision
Siemens 6ES7326-2BF10-0AB0 is an SM 326 fail-safe digital output module for supported SIMATIC safety installations. It provides ten 24 V DC outputs arranged in two isolated groups of five, with channel status, channel fault and safety-mode indication.
The module supports configured redundancy, diagnostic interrupts and channel-selective passivation. Output loading follows group-current derating, while actuator compatibility depends on the light and dark test settings. Safety performance requires the documented wiring, addressing, configuration and complete safety-function assessment.
The module supports configured redundancy, diagnostic interrupts and channel-selective passivation. Output loading follows group-current derating, while actuator compatibility depends on the light and dark test settings. Safety performance requires the documented wiring, addressing, configuration and complete safety-function assessment.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 6ES7326-2BF10-0AB0 Fits Across Industrial Sectors
Industrial uses span production, processing and utility operations, subject to compatible configuration and the applicable engineering requirements.
-
01 · FOOD & BEVERAGE
Packaged Food Production and Commercial Beverage Processing
Production of packaged foods for commercial and consumer markets.Processing and preparation of beverages for retail distribution. -
02 · WATER & WASTEWATER
Municipal Drinking Water and Wastewater Processing Services
Drinking water treatment and distribution for communities and businesses.Municipal and industrial wastewater collection for treatment and reuse. -
03 · PACKAGING
Commercial Packaging Production and Consumer Goods Packing
Packaging production for food, beverage and other consumer goods.Packing industrial goods for commercial distribution and shipment preparation.
Technical specifications for 6ES7326-2BF10-0AB0
-
Product Model6ES7326-2BF10-0AB0
-
Product ParametersTen-Channel Fail-Safe Output Module
-
ManufacturerSiemens
-
Output arrangement10 outputs in two isolated groups of 5
-
Electronics and load voltage24 V DC; 1L+ electronics,2L+/3L+ loads
-
Rated channel current2 A
-
Permitted on-state current7 mA-2.4 A
-
Horizontal group total10 A at 40°C; 7 A at 50°C; 6 A at 60°C maximum
-
Vertical group total5 A at 40°C maximum
-
Off-state residual current0.5 mA maximum
-
Backplane consumption100 mA maximum
-
Typical power loss6 W
-
Connector40-pin front connector
-
Address allocation6 input bytes and 8 output bytes
-
Cable length ceiling600 m unshielded; 1,000 m shielded, subject to test-time/EMC conditions
-
Isolation test370 V AC for 1 minute
-
Resistive switching frequency25 Hz symmetrical maximum
-
DC13 inductive switching frequency0.5 Hz symmetrical maximum
View all additional
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
FAIL-SAFE DIGITAL OUTPUT
Grouped fail-safe load connections with coordinated test behavior
Wire electronics supply 1L+ separately from the two load groups 2L+ and 3L+ as shown. The sources may be separate or common, but all safe-voltage and reference-potential requirements still apply.
Set the unique PROFIsafe destination address before installation and match it in configuration. Verify the selected fail-safe value and response-time budget together with test pulses and the connected actuators.
Prevent cross circuits between L+ and output wiring by the prescribed protected routing. Redundancy and dark-period suppression require the exact assigned channel pair and parameter set, not arbitrary output paralleling.
Features:
- Two load-potential groups
- PROFIsafe address matching
- Coordinated actuator tests
The Siemens 6ES7326-2BF10-0AB0 requires the documented hardware configuration, installation conditions and interface arrangement to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Use the exact 2BF10 order number and documented product-version support. 2BF01 and 2BF41 use different output arrangements and cannot provide substitute specifications.
Preserve the rear address-switch setting, project destination address, test timings, redundant pairing and load-group allocation. Follow the host's approved replacement and reintegration procedure.
Module exchange interrupts safety communication. Review the configured fail-safe response and complete required acknowledgment and functional verification before recommissioning; do not assume universal hot-swap permission.
Features:
- Exact F-module identity
- Address and test-setting capture
- Controlled reintegration
The Siemens 6ES7326-2BF10-0AB0 requires replacement verification based on its complete order number, installed hardware, signal configuration and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
Features:
- Exact-model manufacturer data and relevant original manual pages
- Exact output wiring, PROFIsafe addressing, SELV/PELV supplies, protected routing, actuator test compatibility, derating and configured fail-safe response.
- Accessories and supplied documentation follow the written quotation
Documentation for the Siemens 6ES7326-2BF10-0AB0 includes an independent technical summary and selected original manufacturer pages; check the applicable document edition against the delivered product and approved installation documentation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm final packed dimensions
-
Shipping weightConfirm final packed weight
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginConfirm supplied-unit origin
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7326-2BF10-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is this an ET 200S module?
No. The manufacturer identifies this as an S7-300 fail-safe signal module, with supported centralized or ET 200M use. Its host configuration must follow the documented fail-safe system requirements. -
Can it operate as an ordinary standard-mode output?
The exact 2013 chapter states that 2BF10 supports safety mode only. Do not transfer the standard-mode arrangements of 2BF01 to this order number. -
Can each group carry five channels at 2 A in every installation?
No. Ten amperes per group applies to horizontal installation up to 40°C. Limits fall to 7 A at 50°C and 6 A at 60°C; vertical installation allows 5 A up to 40°C. -
Can outputs be paralleled to increase current?
No. Increased power is not supported. The special parallel circuit for dark-period suppression uses assigned redundancy, opposite outputs, common reference and the exact manufacturer's circuit and parameter rules. -
Will every fault always switch the output to zero?
Not with Keep last valid value selected. Communication interruption or F-CPU stop can retain the last output; channel/module faults behave differently. The manual restricts the standard-compliance scope of that setting, so it needs a specific safety assessment. -
What checks are needed for the output tests?
Actuators must tolerate the documented light/dark pulses. For SIL 3 configuration the output must change daily or the required light test must be enabled. Maximum cable length may need longer test/read-back settings and an EMC assessment.
READY TO VERIFY YOUR PART?
Get a 6ES7326-2BF10-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
