PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-300
- 6ES7334-0CE01-0AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7334-0CE01-0AA0 Combined Analog I/O Module
Siemens 6ES7334-0CE01-0AA0 is a combined analog i/o module in the SIMATIC S7-300 SM334 range. It is used for combined analog measurement and actuator control in compatible industrial automation projects.
The SM334 combines four analog inputs and two analog outputs for 0–10 V or 0–20 mA signals. It uses eight-bit analog conversion and a 20-pin front connector. The circuits are not isolated from the backplane, and this execution does not provide diagnostic alarms; signal wiring and load limits must suit the configured measurement and output modes.
The SM334 combines four analog inputs and two analog outputs for 0–10 V or 0–20 mA signals. It uses eight-bit analog conversion and a 20-pin front connector. The circuits are not isolated from the backplane, and this execution does not provide diagnostic alarms; signal wiring and load limits must suit the configured measurement and output modes.
BEFORE YOU BUY
Confirm the complete combined analog i/o module
ACTUAL APPLICATIONS
Application context for 6ES7334-0CE01-0AA0
6ES7334-0CE01-0AA0 is a combined analog i/o module for SIMATIC S7-300 SM334. Its industrial scope includes water and wastewater, food and beverage, industrial manufacturing. Use depends on the compatible system, connected equipment and documented operating limits.
-
01 · WATER & WASTEWATER
Water Supply and Municipal Wastewater Treatment
Drinking Water Treatment ProcessesWastewater Collection and Treatment -
02 · FOOD & BEVERAGE
Food Processing and Beverage Production
Food Processing and ProductionBeverage Production and Bottling -
03 · INDUSTRIAL MANUFACTURING
Industrial Assembly and Component Production
Industrial Component Manufacturing ProcessesAutomated Assembly and Production
Technical specifications for 6ES7334-0CE01-0AA0
-
Product Model6ES7334-0CE01-0AA0
-
Product ParametersCombined Analog I/O Module
-
In stock9 units
-
ManufacturerSiemens
-
Rated load supply24 V DC
-
Maximum load-supply current110 mA without load
-
Maximum backplane current55 mA at 5 V DC
-
Typical power loss3 W
-
Analog input count4
-
Analog output count2
-
Voltage input/output range0–10 V
-
Current input/output range0–20 mA
-
Voltage input resistance100 kΩ
-
Current input resistance50 Ω
-
Analog conversion resolution8 bit including overrange
-
All-channel cycle time5 ms maximum
-
Voltage-output load minimum5 kΩ
-
Current-output load maximum300 Ω
-
Required front connector20-pin
View all additional
Alternative Names
6ES7334-0CE01-0AA0
SIMATIC S7-300 SM334 Combined Analog I/O Module
S7-300 SM334 24 V DC rated load supply
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7334-0CE01-0AA0 combined analog i/o module
Integrate 6ES7334-0CE01-0AA0 only in the documented SIMATIC S7-300 SM334 configuration. Match the installed interfaces and the engineered application before selecting this combined analog i/o module.
The SM334 combines four analog inputs and two analog outputs for 0–10 V or 0–20 mA signals. It uses eight-bit analog conversion and a 20-pin front connector. The circuits are not isolated from the backplane, and this execution does not provide diagnostic alarms; signal wiring and load limits must suit the configured measurement and output modes.
Use the applicable controlled instructions for SIMATIC S7-300 SM334. Validate the assigned signals, communication or output behaviour and retain the accepted configuration for 6ES7334-0CE01-0AA0.
Features:
- Rated load supply: 24 V DC
- Maximum load-supply current: 110 mA without load
- Maximum backplane current: 55 mA at 5 V DC
The 6ES7334-0CE01-0AA0 combined analog i/o module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6ES7334-0CE01-0AA0 combined analog i/o module
Confirm the complete 6ES7334-0CE01-0AA0 identity and installed SIMATIC S7-300 SM334 execution before replacement. Compare the connector arrangement and the technical values required by the existing project.
Record the combined analog i/o module connections, project settings and associated accessories. Preserve the accepted configuration and isolate the affected circuits before exchange.
After fitting 6ES7334-0CE01-0AA0, restore the verified configuration and test every affected function. Retain the identification, diagnostic results and final acceptance record for the SIMATIC S7-300 SM334 equipment.
Features:
- Rated load supply: 24 V DC
- Maximum load-supply current: 110 mA without load
- Maximum backplane current: 55 mA at 5 V DC
The 6ES7334-0CE01-0AA0 combined analog i/o module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6ES7334-0CE01-0AA0 combined analog i/o module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size4 × 11.6 × 12.4cm
-
Shipping weight0.20kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7334-0CE01-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What rated load voltage supplies SM334?
For 6ES7334-0CE01-0AA0, the documented rated load supply is 24 V DC. -
How much load-supply current is required without connected loads?
For 6ES7334-0CE01-0AA0, the documented maximum load-supply current is 110 mA without load. -
What backplane current is specified for this combined analog module?
For 6ES7334-0CE01-0AA0, the documented maximum backplane current is 55 mA at 5 V DC. -
What dissipation is documented for SM334?
For 6ES7334-0CE01-0AA0, the documented typical power loss is 3 W. -
How many analog measurements can SM334 accept?
For 6ES7334-0CE01-0AA0, the documented analog input count is 4. -
How many analog outputs are fitted to the combined module?
For 6ES7334-0CE01-0AA0, the documented analog output count is 2. -
What identification supports ordering the SIMATIC S7-300 SM334 spare?
Specify 6ES7334-0CE01-0AA0, quantity and the installed SIMATIC S7-300 SM334 arrangement. Include label and connector photographs, and identify any required accessories separately. -
Which incoming checks apply to the combined analog i/o module?
Compare the 6ES7334-0CE01-0AA0 label, connector condition and supplied accessories with the quotation. Verify the accepted SIMATIC S7-300 SM334 configuration before replacing the installed item.
READY TO VERIFY YOUR PART?
Get a 6ES7334-0CE01-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
