PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-400
- 6ES7414-3FM07-0AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7414-3FM07-0AB0 connects established PN/DP systems
Siemens 6ES7414-3FM07-0AB0 is the SIMATIC S7-400 CPU 414F-3 PN/DP, with 4 MB of work memory divided into 2 MB for program code and 2 MB for data. Its integrated connections comprise MPI/PROFIBUS DP at X1 and a two-port Ethernet/PROFINET interface at X5.
An IF 964-DP interface module can provide the optional additional PROFIBUS connection. Match the S7-400 rack, system power supply, engineering software and approved standard and fail-safe configuration before replacement; the CPU receives operating power through the backplane.
An IF 964-DP interface module can provide the optional additional PROFIBUS connection. Match the S7-400 rack, system power supply, engineering software and approved standard and fail-safe configuration before replacement; the CPU receives operating power through the backplane.
BEFORE YOU BUY
Verify the configured S7-400 station
ACTUAL APPLICATIONS
Where 6ES7414-3FM07-0AB0 supports distributed process control
The Siemens CPU specifications document these different integration tasks. Apply the listed capabilities only within the configured network, I/O and approved control project.
-
01 · PROFIBUS RETROFIT
Retain installed DP field stations
Use the integrated MPI/DP interface in its configured DP role to exchange cyclic process data with an existing PROFIBUS network. Preserve slave addresses, the bus speed and segment termination while checking the X1 address-space budget and the plant configuration before replacing the controller. -
02 · SHARED I/O
Assign a distributed I/O station
Use the documented PROFINET shared-device capability when an engineered installation assigns a suitable I/O device across controller responsibilities. Maintain the defined module ownership and communication parameters; shared-device support does not itself make a safety configuration valid or a controller pair redundant. -
03 · PROCESS ARCHIVING
Transfer process values to archives
The CPU supports process-control messaging and the AR_SEND archive function. Configure the intended archive connection and data structure to transfer selected process information to the supervisory system, observing the documented connection resources and message limits instead of assuming unrestricted historical-data throughput.
Technical specifications for 6ES7414-3FM07-0AB0
-
Product Model6ES7414-3FM07-0AB0
-
Product ParametersFail-Safe Central Processing Unit
-
In stock1 unit
-
ManufacturerSiemens
-
Program work memory2 MB
-
Data work memory2 MB
-
Typical bit-operation time18.75 ns
-
Integrated network interfacesX1 MPI/DP and X5 PROFINET with two ports
-
Optional interface moduleIF 964-DP; 6ES7964-2AA04-0AB0
-
5 V backplane current1.3 A typical; 1.6 A maximum
-
24 V backplane current300 mA maximum; 150 mA per DP interface
-
Power loss6.5 W typical; 8 W maximum
-
Rack space requiredTwo slots
-
Flash load-memory capacityUp to 64 MB with a FLASH memory card
View all additional
Alternative Names
6ES7414-3FM07-0AB0
CPU 414F-3 PN/DP
SIMATIC S7-400 PN/DP F-CPU
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SIMATIC S7-400 PN/DP ENGINEERING
Match the rack and configured communication roles
Siemens 6ES7414-3FM07-0AB0 is the SIMATIC S7-400 CPU 414F-3 PN/DP, with 4 MB of work memory divided into 2 MB for program code and 2 MB for data. Its integrated connections comprise MPI/PROFIBUS DP at X1 and a two-port Ethernet/PROFINET interface at X5.
An IF 964-DP interface module can provide the optional additional PROFIBUS connection. Match the S7-400 rack, system power supply, engineering software and approved standard and fail-safe configuration before replacement; the CPU receives operating power through the backplane.
The exact CPU specifications list STEP 7 V5.5 with HSP 262 as the programming-package baseline. Confirm additional safety software and the actual firmware compatibility separately. Allocate the two rack slots and verify the 5 V and 24 V backplane load before commissioning.
Features:
- Two rack slots for the 50 mm-wide CPU
- Operating power supplied through the backplane
- IF 964-DP is an optional plug-in interface
The Siemens 6ES7414-3FM07-0AB0 requires the S7-400 rack, power budget and configured network roles to be checked for reliable system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Record 6ES7414-3FM07-0AB0 and the actual installed hardware and firmware. Retain the complete standard and safety project, memory-card type, optional IF module identity and station addressing. Siemens currently lists PM300 Active Product, with a future phase-out date of 1 October 2026.
Establish the required process safe state, preserve the user and configuration data and isolate the station under the site procedure. Identify the MPI/DP and PROFINET cables and any external backup connection before removing the CPU; the EXT. BATT. socket is not its operating-power input.
Fit the same approved CPU type in the intended rack position and restore its controlled configuration. Verify all communication and I/O diagnostics, then complete the required safety checks before restart. Do not interpret the optional DP slot or multicomputing capability as automatic redundancy.
Features:
- Back up program and configuration data
- Record optional IF module and card type
- Verify diagnostics before authorized restart
The Siemens 6ES7414-3FM07-0AB0 CPU 414F-3 PN/DP requires replacement verification of the configured station and safety project before return to operation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
Features:
- Available Siemens document references are confirmed before order
- Software licensing and project backups remain the customer's responsibility
- Accessories are supplied only when listed in the quotation
Documentation for the Siemens 6ES7414-3FM07-0AB0 requires the exact F-CPU column and applicable S7-400 system instructions to be followed; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size23.3 × 30.2 × 6.6 cm
-
Shipping weightApprox. 0.90 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7414-3FM07-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is the third PROFIBUS connection already included in the CPU order?
The third interface is a plug-in location for the optional IF 964-DP. The official specification identifies interface module 6ES7964-2AA04-0AB0. Verify the supplied hardware and quotation separately; the presence of the slot does not establish that its interface module is included. -
Where should the installer connect the CPU operating supply?
Operating power comes through the S7-400 backplane from the system power supply. The CPU is not specified for a separate 24 V DC operating input. Its EXT. BATT. connection is for documented external backup voltage, not a replacement for the rack power supply. -
Can an OB 101 restart routine from the non-F CPU be assumed to apply?
No. In the shared specification table Siemens lists OB 100, 101 and 102 for CPU 414-3 PN/DP, but only OB 100 and 102 for CPU 414F-3 PN/DP. Review the F-CPU startup behavior and the approved project instead of carrying over the non-F entry. -
What preserves the work and load data when station power is removed?
The CPU specifications identify battery-backed retention for the complete work and load memory and state that backup without a battery is not available. Verify the rack backup arrangement and battery condition, and preserve an engineering backup before maintenance. -
Should the combined X1 connector be treated as separate MPI and DP sockets?
No. X1 is one integrated RS485 interface supporting configured MPI or PROFIBUS DP functionality. Check its assigned role and network parameters in the project; do not allocate it as two independent physical interfaces. -
May all 4 MB of work memory be used for program code?
No. Siemens specifies a fixed split of 2 MB for program code and 2 MB for data, and lists the work memory as not expandable. Check code and data utilization separately when sizing or comparing a replacement. -
Does support for four CPUs in a rack provide automatic failover?
No. Siemens documents multicomputing with up to four CPUs in a UR1 or UR2 rack. This is not a statement of redundant failover behavior. A redundant system requires its own supported architecture and engineering; do not infer it from the multicomputing count. -
How should procurement read the future phase-out date in the current catalog?
At this check the exact Siemens Mall entry remains PM300 Active Product and shows 1 October 2026 as the phase-out date. The future date should not be described as an already completed cancellation. Recheck lifecycle status and obtain order-specific availability before scheduling a long-term spare-parts purchase.
READY TO VERIFY YOUR PART?
Get a 6ES7414-3FM07-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
