PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-400
- 6ES7416-2FN05-0AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7416-2FN05-0AB0 CPU 416-2 central processor
Siemens 6ES7416-2FN05-0AB0 is a CPU 416-2 central processor in the SIMATIC S7-400 automation systems. The article-specific data identifies its control role, communication or signal interface and installed system compatibility. Confirm the complete nameplate, electrical class, revision, companion equipment and controlled configuration before ordering.
BEFORE YOU BUY
Confirm the complete CPU 416-2 central processor
ACTUAL APPLICATIONS
Application context for 6ES7416-2FN05-0AB0
Manufacturer documentation places the CPU 416-2 central processor in practical automation applications. The three cases below describe different operating tasks in which 6ES7416-2FN05-0AB0 performs its documented product-family role with the configured companion equipment.
-
01 · WATER & WASTEWATER
Stabilize filtration backwash with Cpu 416 process control
Within the filter cells and backwash valves, 6ES7416-2FN05-0AB0 provides its specified system function as a CPU 416-2 central processor. During filter loading, the system uses this function to sequence isolation, drain and rinse paths, helping it return the filter to production in a known state. -
02 · POWER GENERATION
Coordinate cooling-water circulation with Cpu 416
Within the circulating pumps and heat exchangers, 6ES7416-2FN05-0AB0 serves its documented function as a CPU 416-2 central processor. During controlled shutdown, the system uses this function to sequence redundant equipment around the operating unit, helping it keep heat rejection available to the process. -
03 · CHEMICAL & PETROCHEMICAL
Monitor utility distribution with Cpu 416 process control
Inside the steam, cooling and instrument-air headers, 6ES7416-2FN05-0AB0 supports the configured automation role as a CPU 416-2 central processor. During utility constraint, the system uses this function to prioritize process users from measured demand, helping it protect production continuity during the constraint.
Technical specifications for 6ES7416-2FN05-0AB0
-
Product Model6ES7416-2FN05-0AB0
-
Product ParametersCPU 416-2 central processor
-
In stock1 unit
-
ManufacturerSiemens
-
Exact Article Code6ES7416-2FN05-0AB0
-
Product ClassCpu 416-2 Central Processor
-
Product FamilySIMATIC S7-400 automation systems
-
Controller PlatformSIMATIC S7-400
-
Programming EnvironmentSTEP 7
-
Program ProcessingCyclic and interrupt OBs
-
CommunicationMPI / PROFIBUS / PROFINET by article
-
Memory TypeIntegrated work memory
-
Digital ProcessingBoolean and integer instructions
-
Analog ProcessingFloating-point instructions
-
Diagnostic BufferRetentive event log
-
Real-Time ClockHardware clock integrated
-
MountingSIMATIC mounting rail / rack
-
Supply Class24 V DC or rack backplane
View all additional
Alternative Names
6ES7416 2FN05 0AB0
Siemens CPU 416-2 central processor
SIMATIC S7-400 automation systems CPU 416-2 central processor
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6ES7416-2FN05-0AB0 to the installed SIMATIC S7-400 automation systems
Siemens 6ES7416-2FN05-0AB0 is a CPU 416-2 central processor for the SIMATIC S7-400 automation systems. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare controller platform (SIMATIC S7-400), programming environment (STEP 7) and program processing (Cyclic and interrupt OBs) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6ES7416-2FN05-0AB0
- Product class: CPU 416-2 central processor
- Family: SIMATIC S7-400 automation systems
The Siemens 6ES7416-2FN05-0AB0 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6ES7416-2FN05-0AB0 identity before exchange
Replace 6ES7416-2FN05-0AB0 only after matching the complete article code, CPU 416-2 central processor, installed SIMATIC S7-400 automation systems role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6ES7416-2FN05-0AB0
- Product class: CPU 416-2 central processor
- Family check: SIMATIC S7-400 automation systems
The Siemens 6ES7416-2FN05-0AB0 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for 6ES7416-2FN05-0AB0
- Product family: SIMATIC S7-400 automation systems
- Exact Siemens identity required before service
Documentation for Siemens 6ES7416-2FN05-0AB0 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.5 × 29 × 21.9 cm
-
Shipping weight0.70 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371098
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7416-2FN05-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What should engineering compare before integrating 6ES7416-2FN05-0AB0 into the installed system?
Compare the documented SIMATIC S7-400 automation systems role, supply class, communication or signal interface, firmware or hardware revision and companion equipment. -
Which incoming-inspection checks apply to 6ES7416-2FN05-0AB0?
Inspect the 6ES7416-2FN05-0AB0 label, connector keying, housing or circuit board condition, seals, terminals and signs of transport damage. -
Can another article in the same SIMATIC S7-400 automation systems family directly replace 6ES7416-2FN05-0AB0?
Do not assume interchangeability. Match the full article code, technical ratings, interface count, protocol, configuration and installed mechanical arrangement. -
Which connection records should maintenance capture before removing 6ES7416-2FN05-0AB0?
Photograph each connector, cable label, shield, earth conductor, network path and adjacent module before disconnecting 6ES7416-2FN05-0AB0. -
Which configuration data should be backed up before exchanging 6ES7416-2FN05-0AB0?
Retain the applicable PLC, HMI, drive, network or device configuration and record firmware, addresses, parameters and diagnostic messages. -
How should technicians commission 6ES7416-2FN05-0AB0 after installation?
Confirm the documented supply and wiring, restore the controlled configuration, inspect diagnostics and test the affected CPU 416-2 central processor function at a safe operating point. -
What service evidence should be retained after work on 6ES7416-2FN05-0AB0?
Keep the receiving inspection, original connection record, configuration backup, measurements, diagnostic results and final acceptance record for 6ES7416-2FN05-0AB0. -
Which nameplate details identify the correct 6ES7416-2FN05-0AB0 for a distributor quotation?
Quote 6ES7416-2FN05-0AB0 with the complete suffix, CPU 416-2 central processor, SIMATIC S7-400 automation systems, quantity and clear nameplate photographs.
READY TO VERIFY YOUR PART?
Get a 6ES7416-2FN05-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
