Close Menu
Get Parts Quote
Name
Company *
WhatsApp / WeChat (For Faster Quote) *
Email *
Address
City
State / Province / Region
Zipcode
Country
Quantity *
Part Number *
Manufacturer
Preferred Condition
Additional Information
Cancel
Fast Shipping Available
Siemens 6ES7183-0AA01-0XA0
· Product image is representative; revision or series may vary. Contact us to request a specific version.
Ships by Tuesday, November 24

6ES7183-0AA01-0XA0

PROFIBUS DP Slave Interface

Shipping Information

  • For inventory products, we support same day shipping upon payment.
  • For urgent needs, we offer same-day shipping on most items for orders placed before 2:00 PM UTC+8 Simply mention your preferred next-day shipping when place the order, and your order will be prioritized to minimize downtime.
  • For indent items, typical turnaround is 1-3 weeks, depending on parts availability and scarcity.
Customs & Documentation
We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
Payment
Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
Product Condition
Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
Quantity
Mobile *
Country/Region *
E-mail *
Company
Content *
(gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
For more information on how your data is processed and stored by Amikong please read our privacy policy.
  • 20+

    years in automation
  • ISO 9001

    certified quality system
  • 12 months

    amikon warranty
  • 2-hour reply

    from your account manager
  • Success Story

    solutions in action
PRODUCT DESCRIPTION

Programmable IM 183-1 interface for customer-specific PROFIBUS DP devices

Siemens 6ES7183-0AA01-0XA0 identifies the IM 183-1 slave interface module. Its SPC 3 ASIC and isolated RS485 interface provide PROFIBUS DP communication up to 12 Mbit/s. An onboard 80C32 processor supports the customer-specific firmware architecture described in the Siemens user manual.

The module includes SRAM, selectable EPROM capacity, an RS232 interface and a host-bus connector. Siemens describes it as a platform for firmware testing, demonstrations and customer-specific systems. Host software and memory mapping remain important integration factors; similar connectors do not establish software interchangeability.
ACTUAL APPLICATIONS

Industrial Production and Service Sectors

These industry examples describe Siemens' broader market coverage, not verified installations of this exact product. Product suitability depends on the documented configuration and engineering requirements.
  • 01 · TEXTILE MANUFACTURING

    Natural Fibers and Fabric Production

    Natural fiber production and processing within the textile industry.Fabric production spanning the wider commercial textile manufacturing sector.
  • 02 · PLASTICS PROCESSING

    Molded Plastic Products

    Injection molding for plastic product manufacturing across industrial markets.Blow molding within the wider plastic product manufacturing industry.
  • 03 · FOOD & BEVERAGE

    Edible Oil and Sugar Production

    Edible oil production and processing across the food manufacturing sector.Sugar manufacturing and processing within the commercial food industry.

Technical specifications for 6ES7183-0AA01-0XA0

  • Product Model
    6ES7183-0AA01-0XA0
  • Product Parameters
    PROFIBUS DP Slave Interface
  • Manufacturer
    Siemens
  • Application role
    PROFIBUS DP slave interface
  • Communication protocol
    PROFIBUS DP
  • Maximum data transmission rate
    12 Mbit/s
  • Communication ASIC
    SPC 3
  • Microprocessor
    80C32 at 20 MHz
  • Working memory
    32 KB SRAM
  • EPROM capacity
    32 KB or 64 KB, selected by jumper
  • PROFIBUS physical interface
    Isolated RS485; 10-pole connector
  • Additional serial interface
    RS232; 14-pole connector
  • Host-bus connection
    50-pole connector
  • Module supply
    5 V DC via host interface
  • Isolated interface supply
    Separate isolated 5 V supplied by host application; fuse required
  • Typical current consumption
    250 mA in catalog; not isolated-supply maximum
  • Permissible environmental temperature
    0 to +70 °C
  • Watchdog/reset circuit
    MAX705; fixed watchdog time; watchdog jumper control
View all additional
SYSTEM & REPLACEMENT CHECK

Information needed before ordering

Three direct checks to secure your system integration and minimize ordering risks.

Information

System integration Replacement check Manuals & support
CUSTOM PROFIBUS SLAVE DEVELOPMENT

Align the SPC 3 memory map with the customer-specific host implementation

IM 183-1 combines an SPC 3 slave interface with an 80C32 processor, SRAM and EPROM. The manual distinguishes program memory from data memory and defines the address spaces used by the ASIC and host signals. Preserve those relationships when integrating customer firmware; the shared PROFIBUS protocol does not standardize the host application's memory layout.
The isolated RS485 interface needs a second isolated five-volt supply from the host application, separate from the module supply. Siemens also specifies application-side fusing. Treat power provision, isolation and connector assignments as a complete host-design check, rather than assuming the catalog's typical current figure describes every supply path.
Mechanical connection uses separate host, RS232 and RS485 headers. The manual requires external shield termination and short bus ribbon cabling, with EMC considered in the routing. It also explicitly rules out IM 318M software compatibility, even though portions of the connector assignment are retained; electrical resemblance is not a software migration plan.

Features:

  • SPC3-specific program and data-memory mapping
  • Separate isolated RS485 power provision
  • External shield and host-software review
The Siemens 6ES7183-0AA01-0XA0 requires the documented hardware configuration, installation conditions and interface arrangement to be verified before system integration and commissioning.
INTERCHANGEABILITY

Verify the complete replacement identity before commissioning

Identify the installed module as IM 183-1 and match 6ES7183-0AA01-0XA0, including its complete suffix. The manual cover's number ending in 8BA0 identifies documentation, not the hardware order. Review the existing host design and firmware before ordering; an IM 318M or another PROFIBUS slave is not automatically interchangeable.
Record the EPROM device, its selected capacity and the customer firmware image before a replacement is prepared. Siemens documents jumper-selected 32 KB and 64 KB arrangements, together with a specific SPC3 address map. Preserve the appropriate configuration instead of assuming that the catalog's 64 KB entry identifies the installed program.
Compare the existing host-bus signal arrangement, reset behavior and watchdog configuration with the replacement board. The manual notes that host address, data and control signals are not additionally driven; connections must therefore remain very short or use external drivers. Those implementation details require host documentation, not a conclusion drawn from connector appearance.

Features:

  • Hardware order separate from manual number
  • EPROM and firmware preservation
  • Host-signal and watchdog configuration review
The Siemens 6ES7183-0AA01-0XA0 requires replacement verification based on its complete order number, installed hardware, signal configuration and project documentation.
DOCUMENTATION STATUS

Browse the Manuals, Datasheets, Official Documents, Links

Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.

Features:

  • Exact-model manufacturer data and relevant original manual pages
  • Verified manufacturer product reference; separate installation document not supplied
  • Accessories and supplied documentation follow the written quotation
Documentation for the Siemens 6ES7183-0AA01-0XA0 includes an independent technical summary and selected original manufacturer pages; check the applicable document edition against the delivered product and approved installation documentation.

Important notice

Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION

Commercial terms without hidden steps

Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
  • 01

    Shipping & delivery

    Dispatch
    Eligible stock: same / next day
    Carriers
    DHL, FedEx or UPS
    Ship from
    Xiamen, China
    Packed size
    Confirm final packed dimensions
    Shipping weight
    Confirm final packed weight
  • 02

    Payment & customs

    Payment
    Bank transfer (T/T)
    Currencies
    USD · EUR · GBP · RMB
    Credit cards
    Not accepted
    HS reference
    8517623990
    Origin
    Confirm supplied-unit origin
  • 03

    Warranty & returns

    Warranty
    12 months from AMIKON
    Inspection
    Label, condition and packing checks
    Returns
    Prior RMA authorisation required
    Compatibility
    Confirm before order
    OEM warranty
    Does not apply
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
  • Part checked

    Full suffix recorded
  • Condition checked

    Label and appearance
  • Packing checked

    Antistatic protection
  • Tracking supplied

    Established couriers
  • Sandy Lin

    Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS

Questions buyers ask about 6ES7183-0AA01-0XA0

Direct answers about identity, compatibility, stock, warranty, payment and shipping.
  • Is IM 183-1 a master or a slave interface?

    The exact ordering table identifies 6ES7183-0AA01-0XA0 as the IM 183-1 slave module. Siemens also lists IM183 as a slave in its ComDeC development-kit description. Do not confuse it with the adjacent IM 180 master module.
  • Is IM 183-1 software-compatible with IM 318M?

    No. The Siemens user description explicitly states that software compatibility with IM 318M is not provided, citing the SPC3 architecture and omission of dual-port RAM. Some connector assignments are largely retained, but that does not make the software or data-memory layout interchangeable.
  • Does the module use 32 KB or 64 KB EPROM?

    The user description permits either 32 KB or 64 KB EPROM, selected by a jumper. The catalog lists a 64 KB EPROM arrangement. Check the fitted device, jumper and firmware image; the product code does not establish the customer-specific program content.
  • What power arrangements does the isolated RS485 interface need?

    The manual distinguishes the module's 5 V supply from a second isolated 5 V supply generated by the host application for RS485. It also requires application-side fusing. Do not interpret typical module current as a complete host power-design specification.
  • Which physical connectors are documented?

    The module has a 50-pole host-bus connector, a 14-pole RS232 connector and a 10-pole RS485 connector. Verify pin assignments and the host implementation against the original user description before connection; connector size alone does not prove compatibility.
  • Is the RS232 connection a second PROFIBUS port?

    No. Siemens describes RS232 as an additional interface using the 80C32 UART. PROFIBUS communication uses the separate isolated RS485 interface and SPC3 ASIC. Their connector counts and functions differ.
  • Where is the cable shield connected?

    The module does not provide the external shield termination. Siemens requires the shield connection in the host application and emphasizes a short bus ribbon cable with suitable EMC routing. The customer-specific assembly documentation remains necessary for the final implementation.
READY TO VERIFY YOUR PART?

Get a 6ES7183-0AA01-0XA0 quote with price, lead time and revision check.

Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product

Product Browsing History