PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Sinumerik
- 6FC5247-0AF12-1AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6FC5247-0AF12-1AA0 Spindle and Rapid-Traverse Override Switch
Siemens 6FC5247-0AF12-1AA0 is a spindle and rapid-traverse override switch in the SINUMERIK range. It provides the documented function for a compatible industrial automation or building-control configuration.
This electronic rotary switch provides the spindle and rapid-traverse override selection used by compatible SINUMERIK machine-control panels. The 16G latching code, 24-position scale and supplied dials distinguish it from the related feedrate override execution.
This electronic rotary switch provides the spindle and rapid-traverse override selection used by compatible SINUMERIK machine-control panels. The 16G latching code, 24-position scale and supplied dials distinguish it from the related feedrate override execution.
BEFORE YOU BUY
Confirm the complete spindle and rapid-traverse override switch
ACTUAL APPLICATIONS
Application context for 6FC5247-0AF12-1AA0
6FC5247-0AF12-1AA0 supports compatible SINUMERIK installations across the selected application fields. Each use depends on the engineered configuration, interface allocation and documented operating limits.
-
01 · METALS & MINING
Metal Production and Mineral Resource Processing
Ferrous and Nonferrous MetalsMineral Resource Processing -
02 · AUTOMOTIVE
Vehicle Manufacturing and Automotive Component Production
Vehicle ManufacturingAutomotive Component Production -
03 · AEROSPACE
Aerospace Manufacturing and Aviation Support Services
Aerospace Component ManufacturingAviation Support Services
Technical specifications for 6FC5247-0AF12-1AA0
-
Product Model6FC5247-0AF12-1AA0
-
Product ParametersSpindle and Rapid-Traverse Override Switch
-
In stock6 units
-
ManufacturerSiemens
-
Switch functionSpindle and rapid-traverse override
-
Electrical switch pattern1 × 16G
-
Rotary positions24 positions over 360 degrees
-
Latching positionPosition 16
-
Supplied controlsCap, knob and pointer
-
Supplied scalesRapid-traverse and spindle dials
View all additional
Alternative Names
Siemens SINUMERIK Spindle and Rapid-Traverse Override Switch
6FC5247-0AF12-1AA0 Spindle and Rapid-Traverse Override Switch assembly
SINUMERIK compatible Spindle and Rapid-Traverse Override Switch
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6FC5247-0AF12-1AA0 spindle and rapid-traverse override switch
Integrate 6FC5247-0AF12-1AA0 only in the documented SINUMERIK arrangement. Match the supply, interface and connector allocation to the accepted engineering record.
This electronic rotary switch provides the spindle and rapid-traverse override selection used by compatible SINUMERIK machine-control panels. The 16G latching code, 24-position scale and supplied dials distinguish it from the related feedrate override execution.
Retain the controlled project, wiring record and diagnostic baseline for 6FC5247-0AF12-1AA0. Validate the assigned function after the surrounding SINUMERIK configuration is restored.
Features:
- Match the documented SINUMERIK interface
- Validate switch function and terminal allocation
- Retain the accepted project and diagnostics
The 6FC5247-0AF12-1AA0 spindle and rapid-traverse override switch requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6FC5247-0AF12-1AA0 spindle and rapid-traverse override switch
Confirm the complete 6FC5247-0AF12-1AA0 article and SINUMERIK execution before replacement. Compare every suffix, terminal arrangement and operating value.
Record the installed connections and configuration that determine the role of this spindle and rapid-traverse override switch. Isolate the affected circuits before exchange.
After fitting 6FC5247-0AF12-1AA0, restore the verified configuration, clear applicable diagnostics and complete a functional acceptance test.
Features:
- Confirm the full 6FC5247-0AF12-1AA0 article
- Compare the installed connector arrangement
- Test the restored spindle and rapid-traverse override switch function
The 6FC5247-0AF12-1AA0 spindle and rapid-traverse override switch requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before installation
- Match the manual scope to SINUMERIK
- Retain the 6FC5247-0AF12-1AA0 commissioning record
Documentation for the 6FC5247-0AF12-1AA0 spindle and rapid-traverse override switch must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size8 × 8 × 6 cm
-
Net weight0.180 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6FC5247-0AF12-1AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How does switch function affect selection of 6FC5247-0AF12-1AA0?
The documented switch function for 6FC5247-0AF12-1AA0 is Spindle and rapid-traverse override. Compare that value with the accepted SINUMERIK configuration before ordering. -
How does electrical switch pattern affect selection of 6FC5247-0AF12-1AA0?
The documented electrical switch pattern for 6FC5247-0AF12-1AA0 is 1 × 16G. Compare that value with the accepted SINUMERIK configuration before ordering. -
How does rotary positions affect selection of 6FC5247-0AF12-1AA0?
The documented rotary positions for 6FC5247-0AF12-1AA0 is 24 positions over 360 degrees. Compare that value with the accepted SINUMERIK configuration before ordering. -
How does latching position affect selection of 6FC5247-0AF12-1AA0?
The documented latching position for 6FC5247-0AF12-1AA0 is Position 16. Compare that value with the accepted SINUMERIK configuration before ordering. -
How does supplied controls affect selection of 6FC5247-0AF12-1AA0?
The documented supplied controls for 6FC5247-0AF12-1AA0 is Cap, knob and pointer. Compare that value with the accepted SINUMERIK configuration before ordering. -
How does supplied scales affect selection of 6FC5247-0AF12-1AA0?
The documented supplied scales for 6FC5247-0AF12-1AA0 is Rapid-traverse and spindle dials. Compare that value with the accepted SINUMERIK configuration before ordering. -
What should be recorded before replacing 6FC5247-0AF12-1AA0?
Record the complete article marking, connector allocation, project settings and associated SINUMERIK arrangement before removal. -
Which acceptance check is specific to 6FC5247-0AF12-1AA0?
After installation, restore the verified settings for 6FC5247-0AF12-1AA0, review diagnostics and test the affected function through its normal operating range.
READY TO VERIFY YOUR PART?
Get a 6FC5247-0AF12-1AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
