PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Sipart
- 6DR5510-0EG00-0AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6DR5510-0EG00-0AA0 Single Acting Electropneumatic Positioner
Siemens 6DR5510-0EG00-0AA0 is a single-acting SIPART PS2 PA electropneumatic positioner. It positions compatible pneumatic control valves through PROFIBUS PA in engineered process-control applications.
The plastic-housing execution combines position feedback, a pneumatic control stage and bus-powered electronics. It uses M20 × 1.5 electrical entry and G¼ pneumatic connections, with 1.4–7 bar supply air. Its intrinsically safe execution requires the approved bus supply and the temperature limits of the applicable hazardous-area classification.
The plastic-housing execution combines position feedback, a pneumatic control stage and bus-powered electronics. It uses M20 × 1.5 electrical entry and G¼ pneumatic connections, with 1.4–7 bar supply air. Its intrinsically safe execution requires the approved bus supply and the temperature limits of the applicable hazardous-area classification.
BEFORE YOU BUY
Confirm the complete single acting electropneumatic positioner
ACTUAL APPLICATIONS
Application context for 6DR5510-0EG00-0AA0
6DR5510-0EG00-0AA0 is a single-acting SIPART PS2 PA positioner for pneumatic process valves. Suitable industry settings include water treatment, chemical production and power generation. Use requires a compatible PROFIBUS PA supply, actuator and approved hazardous-area configuration.
-
01 · WATER & WASTEWATER
Water Supply and Municipal Wastewater Treatment
Municipal Water Treatment ProcessesIndustrial Wastewater Treatment Operations -
02 · CHEMICAL PROCESSING
Chemical and Petrochemical Manufacturing and Production
Industrial Chemical Batch ProductionPetrochemical Production and Processing -
03 · POWER GENERATION
Electric Power Generation and Energy Production
Thermal Electric Power GenerationIndustrial Cogeneration Process Control
Technical specifications for 6DR5510-0EG00-0AA0
-
Product Model6DR5510-0EG00-0AA0
-
Product ParametersSingle Acting Electropneumatic Positioner
-
In stock2 units
-
ManufacturerSiemens
-
Bus supply range9–24 V, intrinsically safe execution
-
Typical bus current10.5 mA ±10%
-
Communication profilePROFIBUS PA profile B, version 3.0
-
Control cycle time60 ms
-
Linear actuator travel3–130 mm
-
Rotary actuator angle30–100°
-
Selectable deadbandAutomatic or 0.1–10%
-
Position resolution0.05% maximum
-
Transmission error0.2% maximum
-
Supply-air pressure1.4–7 bar
-
Steady-state air consumption0.036 Nm³/h maximum
-
Enclosure protectionIP66 / NEMA 4X
-
Pneumatic connectionG¼ female thread
-
Electrical cable glandM20 × 1.5
-
Operating ambient by temperature classT4: −30–80 ℃; T5: −30–65 ℃; T6: −30–50 ℃
View all additional
Alternative Names
6DR5510-0EG00-0AA0
SIPART PS2 PA Single Acting Electropneumatic Positioner
PS2 PA 9–24 V, intrinsically safe execution bus supply range
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6DR5510-0EG00-0AA0 single acting electropneumatic positioner
Use 6DR5510-0EG00-0AA0 in its documented SIPART PS2 PA arrangement. Compare the installed connections and controlled system configuration before integrating the supplied item.
The plastic-housing execution combines position feedback, a pneumatic control stage and bus-powered electronics. It uses M20 × 1.5 electrical entry and G¼ pneumatic connections, with 1.4–7 bar supply air. Its intrinsically safe execution requires the approved bus supply and the temperature limits of the applicable hazardous-area classification.
Use the applicable controlled instructions for SIPART PS2 PA. Validate the assigned signals, communication or output behaviour and retain the accepted configuration for 6DR5510-0EG00-0AA0.
Features:
- Bus supply range: 9–24 V, intrinsically safe execution
- Typical bus current: 10.5 mA ±10%
- Communication profile: PROFIBUS PA profile B, version 3.0
The 6DR5510-0EG00-0AA0 single acting electropneumatic positioner requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6DR5510-0EG00-0AA0 single acting electropneumatic positioner
Confirm the complete 6DR5510-0EG00-0AA0 identity and installed SIPART PS2 PA execution before replacement. Compare the connector arrangement and the technical values required by the existing project.
Record the single acting electropneumatic positioner connections, project settings and associated accessories. Preserve the accepted configuration and isolate the affected circuits before exchange.
After fitting 6DR5510-0EG00-0AA0, restore the verified configuration and test every affected function. Retain the identification, diagnostic results and final acceptance record for the SIPART PS2 PA equipment.
Features:
- Bus supply range: 9–24 V, intrinsically safe execution
- Typical bus current: 10.5 mA ±10%
- Communication profile: PROFIBUS PA profile B, version 3.0
The 6DR5510-0EG00-0AA0 single acting electropneumatic positioner requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6DR5510-0EG00-0AA0 single acting electropneumatic positioner must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size18.2 × 9.5 × 9.66cm
-
Shipping weight0.90kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9032899099
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6DR5510-0EG00-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which bus-voltage range applies to this intrinsically safe PS2?
For 6DR5510-0EG00-0AA0, the documented bus supply range is 9–24 V, intrinsically safe execution. -
What current allowance does the PA positioner require?
For 6DR5510-0EG00-0AA0, the documented typical bus current is 10.5 mA ±10%. -
Which PROFIBUS device profile is documented for PS2 PA?
For 6DR5510-0EG00-0AA0, the documented communication profile is PROFIBUS PA profile B, version 3.0. -
What controller cycle time applies to the PA execution?
For 6DR5510-0EG00-0AA0, the documented control cycle time is 60 ms. -
What linear valve travel can the PS2 support?
For 6DR5510-0EG00-0AA0, the documented linear actuator travel is 3–130 mm. -
Which rotary actuator angle is covered by PS2 PA?
For 6DR5510-0EG00-0AA0, the documented rotary actuator angle is 30–100°. -
What actuator information is needed to order this PA positioner?
Provide 6DR5510-0EG00-0AA0, single-acting actuator travel or angle, air supply, bus arrangement and hazardous-area requirements. Identify the needed mounting kit and accessories separately so the offered positioner matches the valve. -
What should be verified before accepting a supplied PS2 PA?
Match the 6DR5510-0EG00-0AA0 rating plate, electrical entry, pneumatic threads and enclosure condition. Confirm the ordered accessories and applicable Ex documentation before fitting and initializing the positioner on the intended actuator.
READY TO VERIFY YOUR PART?
Get a 6DR5510-0EG00-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
