PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6DP1900-8AA SYS900 rack monitoring module
Siemens 6DP1900-8AA is the SYS900 monitoring module in the TELEPERM XP process-control range. It is a replacement printed-circuit module for monitoring and signaling in a documented compatible TELEPERM XP assembly used in power-plant process automation.
The board uses a plug-in rack interface for system monitoring and fault signaling. Published third-party supplier data list a nominal 24 V DC supply, typical 5 W no-load consumption and operation from 0 to +55 ℃. These supplier figures are reference data; the installed-system documentation determines the actual connection requirements, configuration and acceptance tests.
The board uses a plug-in rack interface for system monitoring and fault signaling. Published third-party supplier data list a nominal 24 V DC supply, typical 5 W no-load consumption and operation from 0 to +55 ℃. These supplier figures are reference data; the installed-system documentation determines the actual connection requirements, configuration and acceptance tests.
BEFORE YOU BUY
Confirm the complete sys900 rack monitoring module
ACTUAL APPLICATIONS
Application context for 6DP1900-8AA
6DP1900-8AA is the SYS900 module for documented TELEPERM XP process-control configurations. The platform supports thermal electricity generation, combined-cycle power production and industrial heat supply. Article suitability depends on the installed assembly, connector allocation, equipment documentation and verified SYS900 configuration.
-
01 · THERMAL POWER
Thermal Electricity Generation and Steam Power Production
Fossil Fuel Electricity GenerationSteam Power Process Automation -
02 · COMBINED CYCLE POWER
Combined Cycle Generation and Energy Production
Combined Cycle Power GenerationGas Turbine Electricity Production -
03 · INDUSTRIAL HEATING
Industrial Heat Production and District Heating Supply
Industrial Process Heat ProductionDistrict Heating Energy Production
Technical specifications for 6DP1900-8AA
-
Product Model6DP1900-8AA
-
Spare ModelSYS900
-
Product ParametersSYS900 rack monitoring module
-
In stock2 units
-
ManufacturerSiemens
-
Supply voltage24 V DC nominal; 20.4 to 28.8 V DC
-
No-load power consumption5 W typical
-
Backplane interface current100 mA maximum
-
Operating temperature0 to +55 ℃
-
Storage temperature-25 to +70 ℃
-
Relative humidity5 to 95% RH, non-condensing
-
Shock resistance10 g, 11 ms
-
Vibration resistance2 to 13.2 Hz, ±1 mm; 13.2 to 100 Hz, 0.5 g
-
Protection degreeIP20
View all additional
Alternative Names
6DP1900-8AA
TELEPERM XP SYS900 SYS900 rack monitoring module
XP SYS900 24 V DC nominal; 20.4 to 28.8 V DC supply voltage
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6DP1900-8AA sys900 rack monitoring module
Siemens 6DP1900-8AA is the SYS900 monitoring module in the TELEPERM XP process-control range. It is a replacement printed-circuit module for monitoring and signaling in a documented compatible TELEPERM XP assembly used in power-plant process automation.
Match the installed SYS900 assembly, connector allocation and equipment documentation before connection. Third-party supplier figures list 20.4 to 28.8 V DC supply and 5 W typical no-load consumption; compare them with the actual installed configuration.
Use the applicable TELEPERM XP equipment instructions for connection and commissioning. Check the documented monitoring and signaling functions, preserve accepted settings and retain the inspection record.
Features:
- Supply voltage: 24 V DC nominal; 20.4 to 28.8 V DC
- No-load power consumption: 5 W typical
- Backplane interface current: 100 mA maximum
The 6DP1900-8AA sys900 rack monitoring module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6DP1900-8AA sys900 rack monitoring module
Match 6DP1900-8AA and the SYS900 identification to the installed TELEPERM XP assembly before exchange. Another TELEPERM XP module number does not establish interchangeability.
Record the module label, assembly position and connector arrangement before removal. Preserve the applicable equipment configuration and operating records.
Fit the verified SYS900 article using the applicable equipment instructions, restore documented connections and perform the prescribed functional checks before return to service.
Features:
- Supply voltage: 24 V DC nominal; 20.4 to 28.8 V DC
- No-load power consumption: 5 W typical
- Backplane interface current: 100 mA maximum
The 6DP1900-8AA sys900 rack monitoring module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6DP1900-8AA sys900 rack monitoring module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2 × 26.4 × 26.3 cm
-
Shipping weight0.46kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6DP1900-8AA
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What supply range is listed for this SYS900 article?
The exact-article supplier listing states 24 V DC nominal and a 20.4 to 28.8 V DC range; this is third-party reference data. -
What no-load power figure is published for SYS900?
The supplier lists typical no-load consumption of 5 W. It is not an independently confirmed Siemens manufacturer rating. -
Which ambient range is listed for the monitoring board?
Published supplier data give an operating temperature range of 0 to +55 ℃. -
What storage temperature range does the supplier publish?
The third-party listing gives -25 to +70 ℃ for storage. -
What humidity limit is reported for the SYS900 spare?
The supplier specifies 5 to 95% relative humidity under non-condensing conditions. -
Can supplier data establish safe hot-swap permission?
No. Follow the installed TELEPERM XP equipment instructions; the supplier reference does not establish permission for energized replacement. -
What should identify a SYS900 replacement request?
Provide 6DP1900-8AA, the installed assembly designation, connector photographs and applicable equipment records. -
What receiving checks distinguish this monitoring-module order?
Check the complete 6DP1900-8AA label, SYS900 identity, plug-in contacts and supplied board condition against the purchase order.
READY TO VERIFY YOUR PART?
Get a 6DP1900-8AA quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
