PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Vibro-Meter
- IPC704 244-704-000-042
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IPC704 244-704-000-042 Piezoelectric vibration signal conditioner
The Vibro-Meter IPC704 244-704-000-042 is a signal conditioner used with approved CA-series accelerometers in gas-turbine vibration measurement chains. The exact option code defines the channel interface and conditioning arrangement used to transmit a vibration signal to the monitoring system.
Official turbine application documentation identifies this part number in Mitsubishi M701F and M701G combustion-chamber vibration monitoring points. Cable type, sensor connection, power supply, output scaling, grounding and the paired monitoring channel must be preserved when servicing an installed IPC704 chain.
Official turbine application documentation identifies this part number in Mitsubishi M701F and M701G combustion-chamber vibration monitoring points. Cable type, sensor connection, power supply, output scaling, grounding and the paired monitoring channel must be preserved when servicing an installed IPC704 chain.
BEFORE YOU BUY
Confirm the complete Piezoelectric vibration signal conditioner
ACTUAL APPLICATIONS
Application fields for IPC704 244-704-000-042
IPC704 244-704-000-042 is used across compatible installations in the following broad application fields, subject to verified product suitability and site requirements.
-
01 · POWER GENERATION
Thermal, Hydroelectric and Renewable Power Generation
Thermal and hydroelectric power generationRenewable power generation and energy integration -
02 · OIL & GAS
Petroleum Production and Natural Gas Processing
Upstream oil and gas productionNatural gas transmission and distribution -
03 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Continuous Production
Discrete and component manufacturingContinuous industrial production
Technical specifications for IPC704 244-704-000-042
-
Product ModelIPC704 244-704-000-042
-
Spare Model244-704-000-042
-
Product ParametersPiezoelectric vibration signal conditioner
-
In stock1 unit
-
ManufacturerVibro-Meter
-
Conditioner familyIPC704
-
Part number244-704-000-042
-
Product typePiezoelectric signal conditioner
-
Sensor interfaceCompatible CA-series accelerometer
-
Measurement roleGas-turbine vibration conditioning
-
Documented turbine applicationMitsubishi M701F and M701G
-
Documented measurement pointCombustion-chamber vibration
-
Successor familyIPC707
-
Mounting contextIndustrial vibration-monitoring chain
-
Verification requirementMatch complete option code and sensor chain
View all additional
Alternative Names
Vibro-Meter IPC704 244-704-000-042
Vibro-Meter IPC704
Piezoelectric vibration signal conditioner for Vibro-Meter IPC704
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IPC704 244-704-000-042 Piezoelectric vibration signal conditioner
Integrate IPC704 244-704-000-042 only as the documented Piezoelectric vibration signal conditioner in the Vibro-Meter IPC704 architecture. Confirm the exact catalog identity and the compatible surrounding hardware before any field connection is made.
The manufacturer data identifies conditioner family as IPC704 and part number as 244-704-000-042. Match the supply, terminal or connector allocation, cable routing, grounding and configured function to the approved drawing and system record.
Commission in a controlled state. Confirm supply conditions first, review hardware diagnostics and then test each affected signal, protection element or communication path through its intended range before normal operation is enabled.
Features:
- Exact identity: IPC704 244-704-000-042
- Documented Vibro-Meter IPC704 interface
- Controlled diagnostic and functional testing
IPC704 244-704-000-042 requires documented system integration before energising the installation.
INTERCHANGEABILITY
Verify IPC704 244-704-000-042 before replacement
Treat IPC704 244-704-000-042 as the exact replacement identity. A related family code or similar physical outline does not confirm equivalent ratings, connector allocation, firmware, protection logic or mechanical fit.
Before removal, record the full label, revision, installed position and all connected wiring. Preserve the existing values for product type (Piezoelectric signal conditioner) and sensor interface (Compatible CA-series accelerometer) where applicable.
After fitting the replacement, restore the approved configuration and compare status indications with the saved baseline. Prove every affected channel or function individually and complete the applicable manufacturer validation before return to service.
Features:
- Match IPC704 244-704-000-042 in full
- Preserve settings, wiring and service records
- Post-installation functional acceptance test
IPC704 244-704-000-042 requires replacement verification against the installed hardware and configuration.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Exact-model technical data for IPC704 244-704-000-042
- Applicable manufacturer document pages when available
- Directory links by series and brand
Documentation for IPC704 244-704-000-042 must be checked against the installed configuration before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size22.0 × 16.0 × 7.0 cm
-
Net weight1.0 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IPC704 244-704-000-042
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is IPC704 244-704-000-042?
IPC704 244-704-000-042 is a Piezoelectric vibration signal conditioner for the Vibro-Meter IPC704 platform. -
Which identity details must match before replacing IPC704 244-704-000-042?
Match the complete catalog number, suffix, hardware revision, connector arrangement and the documented system configuration. -
What should engineering verify before integrating IPC704 244-704-000-042?
Verify the supply, signal interface, channel or protection assignments, grounding, enclosure and all manufacturer-defined compatibility limits. -
What should maintenance record before removing IPC704 244-704-000-042?
Record the installed position, terminal or connector allocation, cable labels, settings, diagnostics and clear nameplate photographs. -
How should IPC704 244-704-000-042 be commissioned after installation?
Restore the approved configuration, inspect diagnostics and test every affected signal, protection element or communication path at a safe operating point. -
Can a similar Vibro-Meter IPC704 item replace IPC704 244-704-000-042?
No substitution should be approved from appearance or family name alone; compare the complete model, electrical data, interfaces and revision. -
What should a distributor confirm when quoting IPC704 244-704-000-042?
Confirm the full model, quantity, condition, availability, warranty, destination and requested delivery date, supported by label photographs when possible. -
Which documents should accompany IPC704 244-704-000-042?
Use the exact-model data sheet and applicable Vibro-Meter IPC704 manufacturer instructions; confirm each document against the delivered label and installed configuration.
READY TO VERIFY YOUR PART?
Get a IPC704 244-704-000-042 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
IPC704 244-704-000-042Piezoelectric vibration signal conditionerManufacturer: Vibro-MeterView Details
-
Manufacturer: HoneywellView Details -
51201557-150I/O Link Extender cardManufacturer: HoneywellView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
