PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Vibro-Meter
- VM600 CPU M 200-595-074-122/200-595-100-014
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
VM600 CPU M 200-595-074-122/200-595-100-014 VM600 CPUM rack controller and IOCN communication module
Vibro-Meter VM600 CPU M combines a CPUM rack controller with an IOCN communications module for a VM600 ABE04x machinery protection rack. The pair provides two 100 Mbps Ethernet ports and up to three serial ports using RS-232, RS-422 or RS-485 interfaces.
The controller provides access to rack measurement and event logs through VM600 MPSx software and supports MPC4 and AMC8 protection cards. Modbus RTU, Modbus TCP and PROFINET are among the documented communications options; the exact IOCN hardware and order codes should be checked as a matched pair.
The controller provides access to rack measurement and event logs through VM600 MPSx software and supports MPC4 and AMC8 protection cards. Modbus RTU, Modbus TCP and PROFINET are among the documented communications options; the exact IOCN hardware and order codes should be checked as a matched pair.
BEFORE YOU BUY
Confirm the complete VM600 CPU M 200-595-074-122/200-595-100-014 identity
ACTUAL APPLICATIONS
Application fields for VM600 CPU M 200-595-074-122/200-595-100-014
Three model-specific application areas are listed for VM600 CPU M 200-595-074-122/200-595-100-014, with two related application fields under each heading.
-
01 · POWER GENERATION
Thermal and Hydroelectric Power Production
Thermal power production and regional electricity supplyHydroelectric generation and renewable power production -
02 · OIL & GAS
Petroleum Extraction and Natural Gas Processing
Crude petroleum extraction and primary processingNatural gas processing and regional distribution -
03 · METALS & MINING
Metals Production and Mineral Processing
Primary metals refining and alloy productionMineral extraction and raw materials processing
Technical specifications for VM600 CPU M 200-595-074-122/200-595-100-014
-
Product ModelVM600 CPU M 200-595-074-122/200-595-100-014
-
Product ParametersVM600 CPUM rack controller and IOCN communication module
-
ManufacturerVibro-Meter
-
Card pairCPUM and IOCN
-
Rack familyVM600 ABE04x
-
Ethernet ports2
-
Ethernet data rate100 Mbps
-
Serial portsUp to 3
-
Serial electrical interfacesRS-232 / RS-422 / RS-485
-
Fieldbus protocolsModbus RTU / Modbus TCP / PROFINET
-
Configuration interfacesEthernet or RS-232
-
Supported protection cardsMPC4 and AMC8
-
Alarm reset controlFront-panel AR button
-
Front-panel displayIntegrated
-
Event log accessVM600 MPSx software
-
Measurement log accessVM600 MPSx software
View all additional
Alternative Names
CPUM/IOCN pair
VM600 machinery protection platform VM600 CPUM rack controller and IOCN communication module
Vibro-Meter VM600 CPUM rack controller and IOCN communication module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate VM600 CPU M 200-595-074-122/200-595-100-014 with the documented configuration
Install the CPUM and IOCN as the documented controller-and-communications pair in the supported VM600 ABE04x rack. The CPUM and IOCN card pair fits the VM600 ABE04x rack and supervises its protection cards.
Configure the required Ethernet, Modbus RTU/TCP or PROFINET services and verify the selected RS232/422/485 serial channels. The card provides two Ethernet interfaces and up to three serial interfaces; check the enabled Modbus or PROFINET configuration.
Check rack addressing, front-panel status, alarm-reset behavior and network access before enabling protection data exchange.
Features:
- Exact VM600 CPU M 200-595-074-122/200-595-100-014 identity
- 100 Mbps Ethernet rack control
- Ethernet and RS232/RS422/RS485
Use the complete VM600 CPU M 200-595-074-122/200-595-100-014 identity and its documented electrical and interface values when integrating the VM600 CPUM rack controller and IOCN communication module. Verify the installed configuration before commissioning.
INTERCHANGEABILITY
Verify VM600 CPU M 200-595-074-122/200-595-100-014 before replacement
Capture the CPUM and IOCN order numbers, rack address, firmware level, network settings and serial-port assignments. The CPUM and IOCN card pair fits the VM600 ABE04x rack and supervises its protection cards.
A replacement must support the same VM600 rack, protocol set, Ethernet speed and connected monitoring-card configuration. The card provides two Ethernet interfaces and up to three serial interfaces; check the enabled Modbus or PROFINET configuration.
Restore configuration files, confirm event and measurement logging, then validate alarms and rack communications before service.
Features:
- Complete label and revision
- Recorded wiring and configuration
- Controlled post-installation functional test
Match the complete VM600 CPU M 200-595-074-122/200-595-100-014 marking and the installed configuration before replacement. Preserve the approved settings and verify the relevant electrical and interface functions after installation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Exact-model technical data for VM600 CPU M 200-595-074-122/200-595-100-014
- Applicable Vibro-Meter documentation
- Directory links by subcategory and brand
Documentation for VM600 CPU M 200-595-074-122/200-595-100-014 must be matched to the complete article identity and installed configuration before use.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size26.2 × 2.0 × 18.7 cm
-
Shipping weight0.45 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85389091
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about VM600 CPU M 200-595-074-122/200-595-100-014
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does the VM600 CPU M comprise one or two cards?
The documented controller arrangement uses a CPUM card paired with an IOCN communications card. Confirm that both order codes are included in the quote. -
Which VM600 rack accepts this controller pair?
The cards are documented for the VM600 ABE04x rack family. Check the rack part number and existing slot allocation. -
How many Ethernet connections are available?
Two 100 Mbps Ethernet ports are documented. Verify the installed network topology and enabled services. -
Which serial interfaces can be configured?
Up to three serial channels can use RS-232, RS-422 or RS-485 according to configuration. Record each existing port assignment. -
Are Modbus and PROFINET the same ordering requirement?
No. The documented protocol options include Modbus RTU, Modbus TCP and PROFINET; confirm the licensed or configured service needed for the installed rack. -
Which monitoring cards must remain compatible?
Check the installed MPC4 and AMC8 card configuration against the replacement CPUM/IOCN hardware and software. -
What settings should be backed up before exchange?
Save rack addressing, network addresses, serial settings, event logs and the approved controller configuration. -
What must the supplied set include?
Ask for clear photographs of both card labels and a written list of the CPUM, IOCN and any included accessories.
READY TO VERIFY YOUR PART?
Get a VM600 CPU M 200-595-074-122/200-595-100-014 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
VM600 CPU M 200-595-074-122/200-595-100-014VM600 CPUM rack controller and IOCN communication moduleManufacturer: Vibro-MeterView Details
-
VM600 RPS6U SIM-275A 200-582-500-013Power Supply ModuleManufacturer: Vibro-MeterView Details -
2711P-T10C21D8SOPERATOR INTERFACEManufacturer: Allen-BradleyView Details -
NLPL-789Mini LoaderManufacturer: EmersonView Details
-
1769-L19ER-BB1BCompactLogix L19 1MB Memory ControllerManufacturer: Allen-BradleyView Details -
NLC-1075Communication Adapter CableManufacturer: EmersonView Details
-
NL-70824 VAC/DC Input ModuleManufacturer: EmersonView Details
-
NLHR-273232 KB RAM ModuleManufacturer: EmersonView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
