PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
PH8HF Flow Through Sensor Holder
Yokogawa PH8HF is a flow through sensor holder in the PH8HF range. It provides a flow-through path and mechanical support for the documented pH or ORP sensor. The user-specified 1.50kg holder corresponds to the polypropylene configuration in the supplied ultrasonic-cleaning drawing.
The holder connects process piping to the measurement location and supports the configured cleaning arrangement. Polypropylene construction permits a -5 to +80 ℃ holder temperature range, with a documented 3–11 L/min flow range. Confirm the full connection, sealing and cleaning suffixes and the sensor limitations before installation.
The holder connects process piping to the measurement location and supports the configured cleaning arrangement. Polypropylene construction permits a -5 to +80 ℃ holder temperature range, with a documented 3–11 L/min flow range. Confirm the full connection, sealing and cleaning suffixes and the sensor limitations before installation.
BEFORE YOU BUY
Confirm the complete flow through sensor holder
ACTUAL APPLICATIONS
Application context for PH8HF
PH8HF is a flow through sensor holder in the PH8HF range. It serves water treatment, chemical processing, power generation. Suitability depends on the selected process, electrical ratings and installed configuration.
-
01 · WATER TREATMENT
Water Purification and Wastewater Treatment Processes
Industrial Water TreatmentMunicipal Wastewater Treatment -
02 · CHEMICAL PROCESSING
Chemical Manufacturing and Liquid Process Production
Industrial Chemical ProcessingChemical Effluent Treatment -
03 · POWER GENERATION
Electric Power Generation and Water Treatment
Power Plant Water TreatmentSteam Cycle Water Chemistry
Technical specifications for PH8HF
-
Product ModelPH8HF
-
Product ParametersFlow Through Sensor Holder
-
In stock10 units
-
ManufacturerYokogawa
-
Holder wetted materialPolypropylene
-
Holder process temperature-5 to +80 ℃
-
Liquid flow range3 to 11 L/min
-
Process pressure rangeAtmospheric to 500 kPa
-
Support pipe size2 inch
-
Mounting orientationVertical or horizontal
-
O-ring optionsFKM or FFKM
-
Mounting bracket materialSUS304-equivalent stainless steel
-
Threaded process connection optionsRc1 or 1 NPT, complete suffix required
-
Ultrasonic cable options1, 3, 5, 7, 10, 15 or 20 m
View all additional
Alternative Names
PH8HF
PH8HF Flow Through Sensor Holder
PH8HF Polypropylene holder wetted material
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate PH8HF flow through sensor holder
Yokogawa PH8HF is a flow through sensor holder in the PH8HF range. It provides a flow-through path and mechanical support for the documented pH or ORP sensor. The user-specified 1.50kg holder corresponds to the polypropylene configuration in the supplied ultrasonic-cleaning drawing.
The holder connects process piping to the measurement location and supports the configured cleaning arrangement. Polypropylene construction permits a -5 to +80 ℃ holder temperature range, with a documented 3–11 L/min flow range. Confirm the full connection, sealing and cleaning suffixes and the sensor limitations before installation.
Use the applicable PH8HF documentation for PH8HF. Verify the complete configuration, connection assignments and environmental limits, then record the functional checks before commissioning.
Features:
- Holder wetted material: Polypropylene
- Holder process temperature: -5 to +80 ℃
- Liquid flow range: 3 to 11 L/min
The PH8HF flow through sensor holder requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify PH8HF flow through sensor holder
Identify the complete PH8HF nameplate and the installed PH8HF configuration before replacement. Match all connectors and the documented electrical ratings.
The holder connects process piping to the measurement location and supports the configured cleaning arrangement. Polypropylene construction permits a -5 to +80 ℃ holder temperature range, with a documented 3–11 L/min flow range. Confirm the full connection, sealing and cleaning suffixes and the sensor limitations before installation.
After fitting PH8HF, restore the recorded configuration and verify every affected signal or communication path. Retain diagnostic results and the acceptance record.
Features:
- Holder wetted material: Polypropylene
- Holder process temperature: -5 to +80 ℃
- Liquid flow range: 3 to 11 L/min
The PH8HF flow through sensor holder requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the PH8HF flow through sensor holder must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size8 × 13 × 25cm
-
Shipping weight1.50kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9027900000
-
OriginJapan
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about PH8HF
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does PH8HF itself contain the pH measuring electrode?
No. PH8HF is the flow-through holder; the selected pH or ORP sensor is a separate component. -
Which material corresponds to the supplied 1.50kg drawing entry?
The supplied PH8HF drawing lists 1.50kg for the polypropylene ultrasonic-cleaning execution; the stainless-steel entry has a different weight. -
What liquid flow range is permitted through the holder?
The documented PH8HF flow range is 3–11 L/min, subject also to the installed sensor limits. -
What pressure range applies to the flow-through body?
The PH8HF holder specification covers atmospheric pressure to 500 kPa; the sensor may impose a lower limit. -
Can the two-inch support pipe be horizontal?
Yes. PH8HF permits vertical or horizontal mounting on the documented 2-inch support pipe. -
Are all cleaning methods suitable for every sensor?
No. For PH8HF, the PH4/OR4 sensor arrangement cannot use brush or ultrasonic cleaning; check the selected sensor and adaptor. -
Which suffixes are required to quote a flow-through holder?
Provide PH8HF with material, process connection, O-ring and cleaning/cable suffixes, plus the installed sensor code. -
What must be inspected on a received polypropylene holder?
Check the PH8HF body, seals, pipe connections and cleaning components, then match the full configuration with the supplied drawing.
READY TO VERIFY YOUR PART?
Get a PH8HF quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
