PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Yokogawa
- Yokogawa Analytical Instruments
- SC4A-S-PR-NN-002-05-T1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
SC4A-S-PR-NN-002-05-T1 Contacting Conductivity Sensor
Yokogawa SC4A-S-PR-NN-002-05-T1 is a contacting conductivity sensor in the SC4A range. It is the stainless-steel, two-electrode conductivity sensor for retractable PR10 mounting. The complete code selects a 0.02 cm⁻¹ cell constant, a 5 m fixed cable and a Pt1000 temperature element.
The sensor measures conductivity by contacting the liquid with two electrodes. The built-in Pt1000 supports temperature compensation by the connected analyzer. Its stainless-steel wetted surfaces, PEEK insulation and Viton seals must suit the process; hazardous-area use depends on the certified connected circuit and applicable installation restrictions.
The sensor measures conductivity by contacting the liquid with two electrodes. The built-in Pt1000 supports temperature compensation by the connected analyzer. Its stainless-steel wetted surfaces, PEEK insulation and Viton seals must suit the process; hazardous-area use depends on the certified connected circuit and applicable installation restrictions.
BEFORE YOU BUY
Confirm the complete contacting conductivity sensor
ACTUAL APPLICATIONS
Application context for SC4A-S-PR-NN-002-05-T1
SC4A-S-PR-NN-002-05-T1 is a contacting conductivity sensor in the SC4A range. It serves pharmaceuticals, semiconductors, power generation. Suitability depends on the selected process, electrical ratings and installed configuration.
-
01 · PHARMACEUTICALS
Pharmaceutical Manufacturing and Purified Water Production
Pharmaceutical Purified Water ProductionInjectable Solution Water Preparation -
02 · SEMICONDUCTORS
Semiconductor Manufacturing and High Purity Water
Semiconductor Ultrapure Water ProductionElectronic Component Water Purification -
03 · POWER GENERATION
Electric Power Generation and Water Purification
Power Generation Water TreatmentBoiler Feedwater Purity Monitoring
Technical specifications for SC4A-S-PR-NN-002-05-T1
-
Product ModelSC4A-S-PR-NN-002-05-T1
-
Product ParametersContacting Conductivity Sensor
-
In stock7 units
-
ManufacturerYokogawa
-
Measurement electrode quantity2
-
Nominal cell constant0.02 cm⁻¹
-
Integral cable length5 m
-
Temperature elementPt1000 to IEC 751
-
Wetted electrode materialAISI 316L stainless steel
-
Sensor insulationPEEK 450G
-
Process seal materialViton
-
Retractable fittingPR10
-
Mounting threadM19 × 1.5
-
Temperature response t90Less than 1 minute
-
Conductor cross-section0.6 mm²
-
Cable braid coverage85% tinned copper
-
Cable jacketTPE-O, black
View all additional
Alternative Names
SC4A-S-PR-NN-002-05-T1
SC4A Contacting Conductivity Sensor
SC4A 2 measurement electrode quantity
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate SC4A-S-PR-NN-002-05-T1 contacting conductivity sensor
Yokogawa SC4A-S-PR-NN-002-05-T1 is a contacting conductivity sensor in the SC4A range. It is the stainless-steel, two-electrode conductivity sensor for retractable PR10 mounting. The complete code selects a 0.02 cm⁻¹ cell constant, a 5 m fixed cable and a Pt1000 temperature element.
The sensor measures conductivity by contacting the liquid with two electrodes. The built-in Pt1000 supports temperature compensation by the connected analyzer. Its stainless-steel wetted surfaces, PEEK insulation and Viton seals must suit the process; hazardous-area use depends on the certified connected circuit and applicable installation restrictions.
Use the applicable SC4A documentation for SC4A-S-PR-NN-002-05-T1. Verify the complete configuration, connection assignments and environmental limits, then record the functional checks before commissioning.
Features:
- Measurement electrode quantity: 2
- Nominal cell constant: 0.02 cm⁻¹
- Integral cable length: 5 m
The SC4A-S-PR-NN-002-05-T1 contacting conductivity sensor requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify SC4A-S-PR-NN-002-05-T1 contacting conductivity sensor
Identify the complete SC4A-S-PR-NN-002-05-T1 nameplate and the installed SC4A configuration before replacement. Match all connectors and the documented electrical ratings.
The sensor measures conductivity by contacting the liquid with two electrodes. The built-in Pt1000 supports temperature compensation by the connected analyzer. Its stainless-steel wetted surfaces, PEEK insulation and Viton seals must suit the process; hazardous-area use depends on the certified connected circuit and applicable installation restrictions.
After fitting SC4A-S-PR-NN-002-05-T1, restore the recorded configuration and verify every affected signal or communication path. Retain diagnostic results and the acceptance record.
Features:
- Measurement electrode quantity: 2
- Nominal cell constant: 0.02 cm⁻¹
- Integral cable length: 5 m
The SC4A-S-PR-NN-002-05-T1 contacting conductivity sensor requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the SC4A-S-PR-NN-002-05-T1 contacting conductivity sensor must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.75 × 2.75 × 5.20cm
-
Shipping weight0.50kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9027900000
-
OriginJapan
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about SC4A-S-PR-NN-002-05-T1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does the 002 code select on the SC4A sensor?
The 002 option in SC4A-S-PR-NN-002-05-T1 specifies a 0.02 cm⁻¹ cell constant. -
Which retractable fitting accepts the PR sensor execution?
The SC4A-S-PR-NN-002-05-T1 PR execution is intended for the documented PR10 retractable fitting. -
Is the SC4A temperature element a process-control sensor?
No. The SC4A-S-PR-NN-002-05-T1 Pt1000 element is designed for conductivity compensation and indication, not process-temperature control. -
How long is the fixed cable in this sensor code?
The 05 option of SC4A-S-PR-NN-002-05-T1 selects a 5 m integral cable. -
What wetted metal belongs to the S execution?
The SC4A-S-PR-NN-002-05-T1 S execution uses AISI 316L stainless steel with the documented seal materials. -
Does a sensor approval alone establish intrinsic safety?
No. SC4A-S-PR-NN-002-05-T1 must be connected to the documented certified intrinsically safe analyzer/circuit and meet the installation conditions. -
What process details should accompany a retractable conductivity enquiry?
Specify SC4A-S-PR-NN-002-05-T1, PR10 fitting, analyzer, process conductivity, temperature, pressure and wetted-material requirements. -
What is checked on receipt of a fixed-cable conductivity sensor?
Inspect the SC4A-S-PR-NN-002-05-T1 code, 5 m cable, electrode surfaces and seal, then confirm the supplied cell-constant record before commissioning.
READY TO VERIFY YOUR PART?
Get a SC4A-S-PR-NN-002-05-T1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
