PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Yokogawa
- Yokogawa Centum XL
- AIP830-101 S2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
AIP830-101 S2 single-loop operation keyboard
Yokogawa AIP830-101 S2 is a single-loop operation keyboard documented for CENTUM desktop operator stations. It performs its assigned input, processing, operator-interface, control or cooling function through the manufacturer-specified electrical and mechanical interfaces. Verify the complete article identity and installed system configuration before replacement or commissioning.
BEFORE YOU BUY
Confirm the complete single-loop operation keyboard
ACTUAL APPLICATIONS
Application context for AIP830-101 S2
Official manufacturer documentation supports these system uses when the complete CENTUM desktop operator stations configuration is verified.
-
01 · POWER GENERATION
Central operator rooms for generating units
Operator Console SystemsBoiler loop setpoint entryTurbine alarm acknowledgement -
02 · CHEMICAL PROCESSING
Reactor and separation control rooms
Process Operator SystemsBatch sequence operator inputProcess alarm response -
03 · WATER & WASTEWATER
Treatment plant supervision stations
Plant Monitoring SystemsFilter process display accessPump station alarm handling
Technical specifications for AIP830-101 S2
-
Product ModelAIP830-101 S2
-
Product Parameterssingle-loop operation keyboard
-
In stock1 unit
-
ManufacturerYokogawa
-
Keyboard ConstructionFlat keyboard
-
Audio FunctionIndependent USB speaker
-
PC Connectors2 × USB Type A
-
Keyboard USB ModeUSB 2.0 full-speed bus-powered
-
Sound USB ModeUSB 1.1 full-speed bus-powered
-
Input Voltage5 V ±5%
-
Maximum Current1 A
-
Operating Temperature5 to 40 °C
-
Storage Temperature-20 to 60 °C
-
Ambient Humidity20 to 80% RH non-condensing
-
Mode SelectionSwitch fitted by suffix -1
-
Confirmation KeysType A by suffix 0
-
Function Keys64 user-definable keys
-
Chassis ColorBlack, Munsell N1.5
View all additional
Alternative Names
AIP830 101 S2
CENTUM desktop operator stations single-loop operation keyboard
Yokogawa single-loop operation keyboard
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match AIP830-101 S2 to the installed CENTUM desktop operator stations
Yokogawa AIP830-101 S2 is a single-loop operation keyboard for the CENTUM desktop operator stations. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare keyboard usb mode (USB 2.0 full-speed bus-powered), sound usb mode (USB 1.1 full-speed bus-powered) and input voltage (5 V ±5%) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: AIP830-101 S2
- Product class: single-loop operation keyboard
- Family: CENTUM desktop operator stations
The Yokogawa AIP830-101 S2 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete AIP830-101 S2 identity before exchange
Replace AIP830-101 S2 only after matching the complete article code, single-loop operation keyboard, installed CENTUM desktop operator stations role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: AIP830-101 S2
- Product class: single-loop operation keyboard
- Family check: CENTUM desktop operator stations
The Yokogawa AIP830-101 S2 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for AIP830-101 S2
- Yokogawa CENTUM desktop operator stations references reviewed
- Exact Yokogawa identity required before service
Documentation for Yokogawa AIP830-101 S2 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size50.0 × 22.5 × 4.4 cm
-
Shipping weight2.00 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8471609000
-
OriginJapan
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about AIP830-101 S2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which identity checks confirm the exact AIP830-101 S2?
Match the complete AIP830-101 S2 nameplate, single-loop operation keyboard, hardware revision and documented CENTUM desktop operator stations position. -
What should engineering verify before connecting AIP830-101 S2?
Compare the documented supply, signal or network interface, connector keying, addresses and companion equipment for AIP830-101 S2. -
Can a similar family article directly replace AIP830-101 S2?
No automatic substitution is established; compare the complete article code, ratings, interface set, firmware and physical arrangement. -
What records should be captured before removing AIP830-101 S2?
Photograph labels, terminals, plugs, shields, earth conductors and adjacent modules, then back up the applicable configuration. -
How should AIP830-101 S2 be inspected on arrival?
Check the exact label, housing or board condition, connectors, supplied accessories and transport protection before installation. -
Which commissioning checks apply after fitting AIP830-101 S2?
Verify supply and wiring, restore the approved configuration, inspect diagnostics and test the affected system function safely. -
What quotation details are required for AIP830-101 S2?
Provide the complete model, quantity, nameplate photographs, installed system, required interface and destination. -
Which service evidence should be retained for AIP830-101 S2?
Retain the receiving inspection, connection record, configuration backup, measurements, diagnostic results and acceptance record.
READY TO VERIFY YOUR PART?
Get a AIP830-101 S2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
