PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Advant OCS and Advant-800xA
- ABB Advant AC800M
- CI855K01 3BSE018106R1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
CI855K01 3BSE018106R1 MasterBus 300 interface kit
ABB CI855K01 3BSE018106R1 is a MasterBus 300 interface kit for the AC 800M controller. It combines the CI855 interface with the TP853 baseplate, connecting AC 800M process control to existing MB300 controller networks through the CEX bus.
The TP853 provides two RJ45 Ethernet connections for redundant network lines. Communication runs at 10 Mbit/s in half-duplex mode with a throughput of 200 DataSets per second; typical consumption is 150 mA from the 24 V CEX supply. DIN-rail mounting, status indicators and supported hot swapping suit modular controller installations.
The TP853 provides two RJ45 Ethernet connections for redundant network lines. Communication runs at 10 Mbit/s in half-duplex mode with a throughput of 200 DataSets per second; typical consumption is 150 mA from the 24 V CEX supply. DIN-rail mounting, status indicators and supported hot swapping suit modular controller installations.
BEFORE YOU BUY
Confirm the complete CI855K01 3BSE018106R1 identity
ACTUAL APPLICATIONS
Application fields for CI855K01 3BSE018106R1
These broad application fields reflect the documented function and technical characteristics of CI855K01 3BSE018106R1.
-
01 · CHEMICAL PROCESSING
Industrial Chemistry and Chemical Engineering
Organic chemistry and industrial chemical sectorsFine chemistry and specialty chemical sectors -
02 · OIL & GAS
Petroleum Refining and Natural Gas
Petroleum refining and natural gas sectorsOnshore petroleum and offshore energy sectors -
03 · POWER GENERATION
Thermal Power and Renewable Energy
Thermal power and regional electric utilitiesHydroelectric power and renewable energy sectors
Technical specifications for CI855K01 3BSE018106R1
-
Product ModelCI855K01 3BSE018106R1
-
Spare Model3BSE018106R1
-
Product ParametersMasterBus 300 interface kit
-
In stock1 unit
-
ManufacturerABB
-
ProtocolMasterBus 300
-
Ethernet speed10 Mbit/s, half duplex
-
DataSet throughput200 DataSets/s
-
Ethernet connectors2 x 8-pin RJ45 on TP853
-
CEX bus capacity12 interface units maximum
-
Supply voltage24 V DC from CEX bus
-
Typical supply current150 mA
-
Typical power dissipation3.6 W
-
Line redundancySupported
-
Module redundancyNot supported
-
Hot swapSupported
-
Operating temperature0 to +55 °C
-
Storage temperature-40 to +70 °C
-
Ingress protectionIP20
-
Corrosion resistanceISA 71.04 Class G3
View all additional
Alternative Names
CI855K01 3BSE018106R1
AC 800M
MasterBus 300 interface kit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate CI855K01 3BSE018106R1 within AC 800M
Install the CI855 with its TP853 baseplate on the AC 800M CEX bus. The interface uses MasterBus 300 DataSet communication, so network addresses, peer DataSets and the controller configuration must be coordinated with the existing MB300 installation.
Connect the two TP853 RJ45 ports according to the approved redundant-network arrangement. Network-line redundancy is supported, but CI855 module redundancy is not; these are different availability features and must be treated separately in the design.
Include the typical 150 mA load in the 24 V CEX-bus power budget and respect the maximum of twelve communication units. Keep the enclosure within 0 to +55 °C and verify run, error and traffic indications after loading the communication configuration.
Features:
- Protocol: MasterBus 300
- Ethernet speed: 10 Mbit/s, half duplex
- AC 800M
Use CI855K01 3BSE018106R1 only within the documented AC 800M arrangement and applicable installation instructions.
INTERCHANGEABILITY
Replace CI855K01 3BSE018106R1 within AC 800M
Retain the complete CI855K01 kit identity when replacing the interface and baseplate together. The kit contains CI855 and TP853; ordering a bare interface does not by itself establish that the required baseplate is included.
Record both network connections and the MB300 address and DataSet configuration before exchange. Use the applicable AC 800M hot-swap procedure where allowed; supported hot swapping does not remove the need to preserve controller and network settings.
After replacement, check CEX recognition, the status LEDs and DataSet exchange with each peer. Verify both redundant network paths separately so that normal traffic on one cable does not conceal a fault on the other.
Features:
- Protocol: MasterBus 300
- Ethernet speed: 10 Mbit/s, half duplex
- AC 800M
Use CI855K01 3BSE018106R1 only within the documented AC 800M arrangement and applicable installation instructions.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Exact-model technical data for CI855K01 3BSE018106R1
- Document applicability checked against the complete identity
- Directory links by subcategory and brand
Documentation for CI855K01 3BSE018106R1 must match the installed product identity and supplied configuration.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size18.50 x 6.50 x 12.80 cm
-
Net weight0.48 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8517623790
-
OriginSweden
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about CI855K01 3BSE018106R1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does CI855K01 include the Ethernet baseplate (CI855K01 3BSE018106R1)?
CI855K01 contains the CI855 interface and TP853 baseplate; the two RJ45 network ports are on TP853. -
Is MB300 line redundancy the same as module redundancy (CI855K01 3BSE018106R1)?
No. CI855 supports redundant network lines but not redundant CI855 interface modules. -
What throughput should an AC 800M MB300 design allow (CI855K01 3BSE018106R1)?
The CI855 connection operates at 10 Mbit/s half duplex with 200 DataSets/s throughput. -
How much CEX supply current does this kit require (CI855K01 3BSE018106R1)?
Typical CI855 consumption is 150 mA at 24 V DC; include other CEX modules separately in the power budget. -
Can CI855 be exchanged without shutting down the controller (CI855K01 3BSE018106R1)?
Hot swap is supported, subject to the applicable AC 800M procedure and the plant’s availability requirements. -
What proves both TP853 network paths are healthy (CI855K01 3BSE018106R1)?
Check interface indications and peer DataSet exchange on each redundant line separately after the change. -
Which kit details should an ABB spare quotation retain (CI855K01 3BSE018106R1)?
Specify CI855K01, 3BSE018106R1, quantity and whether the complete CI855/TP853 kit is required. -
What should receiving inspect on a CI855K01 delivery (CI855K01 3BSE018106R1)?
Compare the interface and TP853 labels, inspect both RJ45 ports and check the baseplate and DIN-rail hardware against the quoted scope.
READY TO VERIFY YOUR PART?
Get a CI855K01 3BSE018106R1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
CI855K01 3BSE018106R1MasterBus 300 interface kitManufacturer: ABBView Details
-
DSAO110Analog Output ModuleManufacturer: ABBView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
