AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Ships by Friday, August 7
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for AI830 3BSE008518R1
-
Product ModelAI830 3BSE008518R1
-
Spare Model3BSE008518R1
-
Product ParametersRTD Input Module
-
Tariff Code8537101190
-
Country of originSWEDEN
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size4.5x10.5x12cm
-
ManufacturerABB
-
Weight0.24 kg
-
TypeAnalog Input
-
Signal specification3-wire RTD: Pt100, Cu10, NI100, Ni120 and resistive potentiometer
-
Number of channels8
-
Update cycle time150 + 9ms
-
CMRR, 50Hz, 60Hz>60 dB
-
Rated insulation voltage50 V
-
Dielectric test voltage500 V a.c.
-
Power dissipation1.6 W
-
Current consumption +5 V Modulebus70 mA
Description
The AI830/AI830A RTD Input Module has 8 channels for measurement of temperature with resistive elements (RTDs). With 3-wire connections. All the RTDs must be isolated from ground.
The AI830/AI830A can be used with Pt100, Cu10, Ni100, Ni120 or resistive sensors. Linearization and conversion of the temperature to Centigrade or Fahrenheit is performed on the module.
Every channel can be individually configured. The MainsFreq parameter is used to set mains frequency filter cycle time. This will give a notch filter at the frequency specified (50 Hz or 60 Hz).
The AI830/AI830A can be used with Pt100, Cu10, Ni100, Ni120 or resistive sensors. Linearization and conversion of the temperature to Centigrade or Fahrenheit is performed on the module.
Every channel can be individually configured. The MainsFreq parameter is used to set mains frequency filter cycle time. This will give a notch filter at the frequency specified (50 Hz or 60 Hz).
Information
Overview
Manuals
Application Notes
Product Applications
Module Insertion Requirements
Features:
- 16 channels for 24 V d.c. current sourcing outputs
- 2 isolated groups of 8 channels with process voltage supervision
- Output status indicators
- OSP sets outputs to predetermined state upon error detection
- Short-circuit protection to ground and 30 V
- Over-voltage and over-temperature protection
The ABB AI830 3BSE008518R1 performs signal linearization and converts measured resistance values directly into temperature values expressed in either degrees Celsius or Fahrenheit. Each of the eight input channels can be configured independently, allowing different sensor types to operate within the same module. A selectable 50 Hz or 60 Hz mains frequency filter minimizes electrical interference and improves measurement stability in industrial environments.
The AI830 3BSE008518R1 ABB RTD Input Module may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
ABB AO810 3BSE008522R1 RTD Input Module Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Linearization and conversion of temperature values to Centigrade or Fahrenheit are performed directly on the module. Each channel can be individually configured for the specific RTD type and measurement parameters. The MainsFreq parameter sets the mains frequency filter cycle time, providing a notch filter at either 50 Hz or 60 Hz to suppress power line interference.
The module provides 14-bit resolution across all eight channels. Inputs are continuously monitored for open-circuit, short-circuit, and grounded sensor conditions. Diagnostic information is reported through the ModuleBus to the controller.
- Oil and Gas: Controls valves, actuators, and flow rates in upstream/downstream operations
- Chemical Processing: Manages precise dosing, pressure, and temperature control loops
- Power Generation: Regulates turbine controls, boiler feeds, and auxiliary plant signals
- Water/Wastewater: Adjusts pump speeds, chemical addition, and flow regulationC
- Pulp and Paper: Manages high-precision tension, speed, and fluid-level drives
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
DIN-Rail Mount: Ensure the corresponding MTU is firmly snapped onto the horizontal DIN-rail before seating the AI830 module.
Locking Engagement: Push the module straight down into the MTU and verify the mechanical locking mechanism fully engages to prevent loosening under industrial vibrations.
Pin Alignment: Check that module pins and MTU receptacles align cleanly without bending prior to applying final insertion force.
Alternative Names
AI830 3BSE008518RI
AI830 3BSE00851BR1
AI830 3BSE0085I8R1
AI830 3BSE00B518R1
AI830 3BSEOO8518R1
AI830 38SE008518R1
AI83O 3BSE008518R1
AIB30 3BSE008518R1
A1830 3BSE008518R1
AI830-3BSE008518R1
AI830-3BSE008518RI
AI830-3BSE00851BR1
AI830-3BSE0085I8R1
AI830-3BSE00B518R1
AI830-3BSEOO8518R1
AI830-38SE008518R1
AI830-3BSE008518R1
AIB30-3BSE008518R1
A1830-3BSE008518R1
Technical notes
The ABB AI830 3BSE008518R1 is widely used in power generation, chemical processing, oil and gas, water treatment, pulp and paper, pharmaceutical manufacturing, and other industrial automation applications where precise RTD temperature measurement is required. Its combination of high-resolution measurement, configurable channels, integrated diagnostics, and compatibility with the ABB S800 I/O platform makes it a dependable solution for continuous process temperature monitoring.
FAQs
-
What type of sensors does the AI830 support?
+It supports standard RTDs including Pt100, Cu10, Ni100, and Ni120, as well as linear resistive sensors. -
How many channels are available and what is their configuration?
+The module provides 8 independent channels, each utilizing a 3-wire connection to ensure accurate lead-wire resistance compensation. -
Which Terminal Units (MTU) must be used with this module?
+The AI830 requires a matching TU830 or TU833 Extended Module Termination Unit to interface with process wiring. -
How does it deal with electrical line noise?
+The module features a configurable MainsFreq parameter, which deploys a built-in notch filter targeting either 50 Hz or 60 Hz industrial line frequencies.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
