PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Advant OCS and Advant-800xA
- ABB Advant S800 I/O
- TU830V1 3BSE013234R1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
TU830V1 3BSE013234R1 extended module termination unit
ABB TU830V1 3BSE013234R1 is a extended module termination unit in the ABB S800 I/O. The article-specific data identifies its control role, communication or signal interface and installed system compatibility. Confirm the complete nameplate, electrical class, revision, companion equipment and controlled configuration before ordering.
BEFORE YOU BUY
Confirm the complete extended module termination unit
ACTUAL APPLICATIONS
Application context for TU830V1 3BSE013234R1
Manufacturer documentation places the extended module termination unit in practical process applications. The three cases below describe different operating tasks in which TU830V1 3BSE013234R1 performs its documented product-family role with the configured companion equipment.
-
01 · FOOD & BEVERAGE
Supervise recipe mixing with Extended Module process control
During operation of the mixers and ingredient skids, TU830V1 3BSE013234R1 provides its specified system function as a extended module termination unit. During recipe changeover, the system uses this function to sequence material transfers and equipment permissives, helping it preserve the verified batch state. -
02 · CHEMICAL & PETROCHEMICAL
Route distillation control with Extended Module
Inside the columns, reboilers and reflux circuits, TU830V1 3BSE013234R1 operates in its approved product-family role as a extended module termination unit. During feed-composition change, the system uses this function to coordinate temperature, pressure and inventory loops, helping it maintain separation performance. -
03 · OIL & GAS
Govern compressor-train operation with Extended Module
As part of the compressors, seals and antisurge loops, TU830V1 3BSE013234R1 provides its specified system function as a extended module termination unit. During throughput change, the system uses this function to coordinate the control and protection signals for the train, helping it keep the rotating train inside its operating envelope.
Technical specifications for TU830V1 3BSE013234R1
-
Product ModelTU830V1 3BSE013234R1
-
Product Parametersextended module termination unit
-
In stock1 unit
-
ManufacturerABB
-
Exact Article CodeTU830V1 3BSE013234R1
-
Product ClassExtended Module Termination Unit
-
Product FamilyABB S800 I/O
-
MTU TypeExtended module termination unit (MTU Type)
-
Terminal Count50 terminals class
-
I/O Module WidthOne S800 I/O position
-
Field Voltage24 V DC class
-
Maximum Current10 A station distribution class
-
Module BusS800 I/O ModuleBus
-
Connector KeyingMechanical keyed interface
-
MountingDIN rail
-
Shield TerminationIntegrated field shield points
-
System FamilyABB S800 I/O (System Family)
View all additional
Alternative Names
TU830V1 3BSE013234R1
ABB extended module termination unit
ABB S800 I/O extended module termination unit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match TU830V1 3BSE013234R1 to the installed ABB S800 I/O
ABB TU830V1 3BSE013234R1 is a extended module termination unit for the ABB S800 I/O. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare mtu type (Extended module termination unit (MTU Type)), terminal count (50 terminals class) and i/o module width (One S800 I/O position) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: TU830V1 3BSE013234R1
- Product class: extended module termination unit
- Family: ABB S800 I/O
The ABB TU830V1 3BSE013234R1 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete TU830V1 3BSE013234R1 identity before exchange
Replace TU830V1 3BSE013234R1 only after matching the complete article code, extended module termination unit, installed ABB S800 I/O role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: TU830V1 3BSE013234R1
- Product class: extended module termination unit
- Family check: ABB S800 I/O
The ABB TU830V1 3BSE013234R1 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical data prepared for TU830V1 3BSE013234R1
- Product family: ABB S800 I/O
- Exact ABB identity required before service
Documentation for ABB TU830V1 3BSE013234R1 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size6.4 × 17 × 5.8 cm
-
Shipping weight0.22 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371098
-
OriginSweden
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about TU830V1 3BSE013234R1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which connection records should maintenance capture before removing TU830V1 3BSE013234R1?
Photograph each connector, cable label, shield, earth conductor, network path and adjacent module before disconnecting TU830V1 3BSE013234R1. -
Which configuration data should be backed up before exchanging TU830V1 3BSE013234R1?
Retain the applicable PLC, HMI, drive, network or device configuration and record firmware, addresses, parameters and diagnostic messages. -
How should technicians commission TU830V1 3BSE013234R1 after installation?
Confirm the documented supply and wiring, restore the controlled configuration, inspect diagnostics and test the affected extended module termination unit function at a safe operating point. -
What service evidence should be retained after work on TU830V1 3BSE013234R1?
Keep the receiving inspection, original connection record, configuration backup, measurements, diagnostic results and final acceptance record for TU830V1 3BSE013234R1. -
Which nameplate details identify the correct TU830V1 3BSE013234R1 for a distributor quotation?
Quote TU830V1 3BSE013234R1 with the complete suffix, extended module termination unit, ABB S800 I/O, quantity and clear nameplate photographs. -
What should engineering compare before integrating TU830V1 3BSE013234R1 into the installed system?
Compare the documented ABB S800 I/O role, supply class, communication or signal interface, firmware or hardware revision and companion equipment. -
Which incoming-inspection checks apply to TU830V1 3BSE013234R1?
Inspect the TU830V1 3BSE013234R1 label, connector keying, housing or circuit board condition, seals, terminals and signs of transport damage. -
Can another article in the same ABB S800 I/O family directly replace TU830V1 3BSE013234R1?
Do not assume interchangeability. Match the full article code, technical ratings, interface count, protocol, configuration and installed mechanical arrangement.
READY TO VERIFY YOUR PART?
Get a TU830V1 3BSE013234R1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
