PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Drives
- SPA YO/YC 1SDA038292R1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
SPA YO/YC 1SDA038292R1 shunt opening release
ABB SPA YO/YC 1SDA038292R1 is a shunt opening release documented for ABB SACE Emax and Tmax T accessories. It performs its assigned input, processing, operator-interface, control or cooling function through the manufacturer-specified electrical and mechanical interfaces. Verify the complete article identity and installed system configuration before replacement or commissioning.
BEFORE YOU BUY
Confirm the complete shunt opening release
ACTUAL APPLICATIONS
Application context for SPA YO/YC 1SDA038292R1
The applications below show typical industry settings, application scenarios, application areas and equipment for SPA YO/YC 1SDA038292R1. Confirm the exact product configuration before use.
-
01 · POWER GENERATION
Generator breaker remote-trip circuits
Plant areas servedGenerator auxiliary breaker openingEmergency switchboard isolation -
02 · RENEWABLE ENERGY
Wind-turbine switchgear trip circuits
Application areasTurbine feeder remote openingConverter cabinet fault isolation -
03 · INDUSTRIAL FACILITIES
Process switchboard shutdown circuits
Application areasMain feeder emergency openingInterlocked equipment isolation
Technical specifications for SPA YO/YC 1SDA038292R1
-
Product ModelSPA YO/YC 1SDA038292R1
-
Product ParametersShunt opening release
-
In stock1 unit
-
ManufacturerABB
-
Release functionShunt opening release
-
Rated control voltage220 to 240 V AC/DC
-
Current typeAC/DC
-
Compatible breaker framesE1, E2, E3, E4, E6 and T8
-
Product classSACE Emax and SACE Tmax T
-
ConfigurationLoose or configurable
-
Applicable standardIEC
-
ABB E-number4376616
-
EAN8015644382926
-
REACH declaration9AKK108466A1425
-
RoHS declaration9AKK108466A1424
-
RoHS conformityEU 2011/65/EU and 2015/863
-
WEEE categoryCategory 5 small equipment
View all additional
Alternative Names
1SDA038292R1
SPA YO/YC
Shunt Open Release 220/240V E1/6-T8
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match SPA YO/YC 1SDA038292R1 to the installed ABB SACE Emax and Tmax T accessories
ABB SPA YO/YC 1SDA038292R1 is a shunt opening release for the ABB SACE Emax and Tmax T accessories. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare compatible breaker frames (E1, E2, E3, E4, E6 and T8), product class (SACE Emax and SACE Tmax T) and configuration (Loose or configurable) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: SPA YO/YC 1SDA038292R1
- Product class: shunt opening release
- Family: ABB SACE Emax and Tmax T accessories
The ABB SPA YO/YC 1SDA038292R1 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete SPA YO/YC 1SDA038292R1 identity before exchange
Replace SPA YO/YC 1SDA038292R1 only after matching the complete article code, shunt opening release, installed ABB SACE Emax and Tmax T accessories role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: SPA YO/YC 1SDA038292R1
- Product class: shunt opening release
- Family check: ABB SACE Emax and Tmax T accessories
The ABB SPA YO/YC 1SDA038292R1 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for SPA YO/YC 1SDA038292R1
- ABB ABB SACE Emax and Tmax T accessories references reviewed
- Exact ABB identity required before service
Documentation for ABB SPA YO/YC 1SDA038292R1 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size8 × 7 × 5 cm
-
Shipping weight0.70 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85389099
-
OriginItaly
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about SPA YO/YC 1SDA038292R1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which breakers accept 1SDA038292R1?
ABB identifies 1SDA038292R1 for E1, E2, E3, E4, E6 and T8 breaker frames. Confirm the installed frame and accessory mounting arrangement before ordering. -
Is this a shunt or undervoltage release?
1SDA038292R1 is a shunt opening release. It trips the breaker when its 220–240 V AC/DC control input is energized. -
Can a similar 220 V coil replace it?
Do not replace 1SDA038292R1 from voltage alone. Match the complete ABB product ID, breaker frame, release function and mechanical interface. -
What control supply is required?
The documented rated control supply for 1SDA038292R1 is 220 to 240 V and supports both AC and DC operation. -
What should arrival inspection cover?
Check the 1SDA038292R1 label, EAN 8015644382926, coil assembly, leads, mounting mechanism and shipping damage before removing the installed release. -
How is operation checked after fitting?
After installing 1SDA038292R1 under an approved maintenance procedure, verify remote opening, local reset, breaker indication and the control-circuit interlock. -
What details belong on a distributor quote?
Quote the exact 1SDA038292R1 product ID, quantity, breaker frame, control voltage, destination and a clear photo of the installed accessory label. -
How should an MRO spare be matched?
Match 1SDA038292R1 by complete ABB code, 220–240 V AC/DC rating, E1/E2/E3/E4/E6/T8 suitability and SACE product class.
READY TO VERIFY YOUR PART?
Get a SPA YO/YC 1SDA038292R1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
