PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Drives
- ACS 850
- FEN-21 68679303
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
FEN-21 68679303 resolver interface module
ABB FEN-21 68679303 is a resolver interface module in the ABB drive feedback interfaces. It is used to connect compatible components and transfer the specified control or signal data.
Its documented configuration includes resolver excitation of 4 to 12 Vrms, excitation frequency of 1 to 20 kHz, resolver signal of 2 to 7 Vrms, and ttl resolution of 1 to 65535 pulses/rev. During operation, the resolver interface module performs its assigned resolver interface module function through the documented power, signal and communication interfaces.
Its documented configuration includes resolver excitation of 4 to 12 Vrms, excitation frequency of 1 to 20 kHz, resolver signal of 2 to 7 Vrms, and ttl resolution of 1 to 65535 pulses/rev. During operation, the resolver interface module performs its assigned resolver interface module function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete resolver interface module
ACTUAL APPLICATIONS
Where FEN-21 68679303 supports industrial control systems
Official documentation supports these system applications when ABB drive feedback interfaces are correctly configured.
-
01 · OIL & GAS
Compression and Pipeline Process Stations
Station Control SystemsGas compressor control racksPipeline metering equipment panels -
02 · CHEMICAL PROCESSING
Reactor and Separation Process Units
Process Automation SystemsReactor control cabinetsSeparator instrumentation panels -
03 · MINING & METALS
Crushing and Grinding Production Lines
Mineral Processing SystemsPrimary crusher control stationsGrinding mill equipment rooms
Technical specifications for FEN-21 68679303
-
Product ModelFEN-21 68679303
-
Product Parametersresolver interface module
-
In stock1 unit
-
ManufacturerABB
-
Resolver Excitation4 to 12 Vrms
-
Excitation Frequency1 to 20 kHz
-
Resolver Signal2 to 7 Vrms
-
TTL Resolution1 to 65535 pulses/rev
-
TTL Cable Length30 to 100 m
-
Resolver Cable Length100 m maximum
-
Terminal Torque0.3 N·m
-
Encoder Supply5.5 V or 24 V selection
-
Latch Inputs2 digital inputs
View all additional
Alternative Names
FEN 21 68679303
ABB drive feedback interfaces resolver interface module
ACS 850 resolver interface module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match FEN-21 68679303 to the installed ABB drive feedback interfaces
ABB FEN-21 68679303 is a resolver interface module for the ABB drive feedback interfaces. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare ttl resolution (1 to 65535 pulses/rev), ttl cable length (30 to 100 m) and resolver cable length (100 m maximum) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: FEN-21 68679303
- Product class: resolver interface module
- Family: ABB drive feedback interfaces
The ABB FEN-21 68679303 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete FEN-21 68679303 identity before exchange
Replace FEN-21 68679303 only after matching the complete article code, resolver interface module, installed ABB drive feedback interfaces role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: FEN-21 68679303
- Product class: resolver interface module
- Family check: ABB drive feedback interfaces
The ABB FEN-21 68679303 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for FEN-21 68679303
- ACS 850 ABB drive feedback interfaces references reviewed
- Exact ACS 850 identity required before service
Documentation for ACS 850 FEN-21 68679303 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.0 x 15.0 x 8.0 cm
-
Shipping weight0.80 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about FEN-21 68679303
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which identity checks confirm the exact FEN-21 68679303?
Match the complete FEN-21 68679303 nameplate, resolver interface module, hardware revision and documented ABB drive feedback interfaces position. -
What should engineering verify before connecting FEN-21 68679303?
Compare the documented supply, signal or network interface, connector keying, addresses and companion equipment for FEN-21 68679303. -
Can a similar family article directly replace FEN-21 68679303?
No automatic substitution is established; compare the complete article code, ratings, interface set, firmware and physical arrangement. -
What records should be captured before removing FEN-21 68679303?
Photograph labels, terminals, plugs, shields, earth conductors and adjacent modules, then back up the applicable configuration. -
How should FEN-21 68679303 be inspected on arrival?
Check the exact label, housing or board condition, connectors, supplied accessories and transport protection before installation. -
Which commissioning checks apply after fitting FEN-21 68679303?
Verify supply and wiring, restore the approved configuration, inspect diagnostics and test the affected system function safely. -
What quotation details are required for FEN-21 68679303?
Provide the complete model, quantity, nameplate photographs, installed system, required interface and destination. -
Which service evidence should be retained for FEN-21 68679303?
Retain the receiving inspection, connection record, configuration backup, measurements, diagnostic results and acceptance record.
READY TO VERIFY YOUR PART?
Get a FEN-21 68679303 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
