AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Drives
- DCS 800
- SDCS-UCM-1C 3ADT220090R0008
Require for Quote:
Need more help? You may also find the answer in our FAQ section
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for SDCS-UCM-1C 3ADT220090R0008
-
Product ModelSDCS-UCM-1C 3ADT220090R0008
-
Product ParametersExcitation board
-
Tariff Code8537101190
-
Country of originSWEDEN
-
Place of shipmentXiamen, China
-
Estimated Shipping Size28x23.3x2.5cm
-
ManufacturerABB
-
Weight0.46 kg
-
Operating Temp-40°C to +70°C
-
Storage Temp-50°C to +85°C
-
Humidity5-95% RH (condensing)
-
ProcessorTriple 32-bit
-
Memory512MB DDR3 RAM
-
Control LoopsUp to 128 PID loops
-
Input Voltage24V DC (±15%) or 120V AC
-
Power Consumption35W (typical)
Description
SDCS-UCM-1C
3ADT220090R0008
MEASUREMENT BOARD
Connection of the Resistor Board
3ADT220090R0008
MEASUREMENT BOARD
Connection of the Resistor Board
Information
Overview
Manuals
Technical notes
Product Applications
Electrical Connections & Wiring
Features:
- External DC Voltage Measurement for H1...H5
- Two Resistor Chains for Voltage Reduction
- External Mounting Outside Drive Module
- Dual DC Voltage Terminal Connections (X1 and X2)
The SDCS-UCM-1C 3ADT220090R0008 ABB MEASUREMENT BOARD may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
ABB SDCS-UCM-1C 3ADT220090R0008 MEASUREMENT BOARD Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
With the help of the DC measurement set SDCS-UCM-1 for H1...H5, external DC voltage measurement at the motor terminals becomes possible. The board contains two resistor chains which are connected to the DC voltage (armature circuit) of the motor. The voltage reduced by the resistor chain is connected to analog input AI3 (XAI: AI3) of the DCS880. The DC voltage is wired to connectors X1 and X2, where the positive DC voltage (C1) is connected to connector X1 and the negative DC voltage (D1) to connector X2. The connection of X1 and X2 is done according to the nominal motor voltage.
- Industrial Cranes & Hoists:Port/overhead/shipyard cranes & winches
- Cable Cars & Ski Lifts:Smooth acceleration & fail-safe deceleration
- Conveyor Systems:Overland bulk material transport
- Rolling Mills:Hot/cold mills: high-torque variable-speed
- Wire Drawing Machines:Pulling metals through dies under continuous tension
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Cable Selection: Utilize twisted, shielded pair cables for instrumentation feedback lines to minimize electromagnetic interference (EMI).
Ground Routing: Connect the board’s protective earth (PE) terminal straight back to the main drive chassis ground plane.
High-Ohmic Segregation: Keep high-voltage resistor measurement paths separate from low-voltage control or communication ribbon cables.
FAQs
-
What is the SDCS-UCM-1C ？
+The ABB SDCS-UCM-1C (Part ID: 3ADT220090R0008) is an essential measurement and excitation circuit board utilized in ABB DC drive systems -
What is the primary function of the SDCS-UCM-1C board?
+The SDCS-UCM-1C operates as a measurement and resistor board. Its main job is to measure external DC voltages and currents within the drive system and feed these parameters back to the main control board for safe, closed-loop regulation -
Which drive series is this board compatible with?
+The board is primarily used in ABB DC drive systems. It is often used with the DCS800 and DCS880 series modules -
What is the purpose of the board in dynamic braking layouts?
+In systems utilizing external DC voltage measurement across motor terminals (specifically frame sizes H1 to H5), the board functions alongside a DC-DC transducer to stream voltage feedback safely via analog input channels (such as AI3).
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN