PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Drives
- DAPC100 3ASC25H203
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
DAPC100 3ASC25H203 ASTAT Motion Control Board
ABB DAPC100 3ASC25H203 is the microcontroller-based control board for ABB ASTAT crane motion control. It coordinates the thyristor interface and exchanges control information with process I/O and other ASTAT units through serial and optical connections.
A 16.384 MHz clock drives the board architecture, with separate EPROM, onboard RAM and internal microcontroller memory. The 24 VDC supply connection, configurable serial communication and two-digit status display support configuration and diagnostics within the ASTAT control assembly.
A 16.384 MHz clock drives the board architecture, with separate EPROM, onboard RAM and internal microcontroller memory. The 24 VDC supply connection, configurable serial communication and two-digit status display support configuration and diagnostics within the ASTAT control assembly.
BEFORE YOU BUY
Confirm the complete ASTAT Motion Control Board
ACTUAL APPLICATIONS
Relevant contexts for DAPC100 3ASC25H203
These broad contexts reflect the ABB motion-control portfolio. They do not establish DAPC100 compatibility with every installation; the ASTAT hardware generation and motion configuration need their own verification.
-
01 · METALS
Metals, Metallurgy and Industrial Energy
Electrical power across metals and metallurgyIndustrial energy management throughout metallurgical environments -
02 · PORTS
Ports, Harbors and Maritime Transport
Ports and harbors within maritime transportElectrical power across ports and harbors -
03 · MARINE
Coastal Marine and Offshore Energy
Energy supply across coastal marine environmentsOffshore energy and maritime power distribution
Technical specifications for DAPC100 3ASC25H203
-
Product ModelDAPC100 3ASC25H203
-
Spare Model3ASC25H203
-
Product ParametersASTAT Motion Control Board
-
In stock1 unit
-
ManufacturerABB
-
Board supply connection24 VDC; X4
-
Data bus width16 bit
-
Address bus width18 bit
-
Clock frequency16.384 MHz
-
Interrupt levels7
-
Watch supervision2 levels
-
Timeout supervision50 µs
-
Onboard EPROM512 Kbytes
-
Onboard RAM64 Kbytes
-
MCU internal RAM2 Kbytes
-
Debug interfaces1 BDM
-
Thyristor bridge interfaces2
-
Optical communication channels3 logical roles: MC, M/F, I/O
-
Serial communication rates9600 / 19200 / 38400 / 115200 bps
-
Status displayTwo 7-segment indicators
View all additional
Alternative Names
ABB DAPC100
3ASC25H203 ASTAT control board
DAPC100 motion control board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate DAPC100 3ASC25H203 in the documented ASTAT arrangement
DAPC100 provides the microcontroller-based control function within the ASTAT DARA assembly. ABB identifies article 3ASC25H203 for DARA 1000, 1000+AO, 1001, 1010 and 1010+AO in the AST10_054 spare-parts list. This identity must not be confused with DAPU100, the separate I/O control board, or with a suffixed DAPC100 variant whose hardware and software may differ.
The board receives 24 VDC at X4. Its X5 connection supports a point-to-point RS232 Tool connection or a multidrop RS485 arrangement using DADT114 and DADT124. Three optical channel roles are identified: MC for controller or horizontal communication, M/F for communication with another ASTAT, and I/O for the DAPU100 process-I/O connection. These labels describe different communication paths, not interchangeable ports.
The thyristor control connection uses X7; DARA 1001 and 1010 route this path through DATX130. X8 is reserved for parallel thyristor modules. ASTAT Tool communication must match the board baud-rate setting. ABB distinguishes generation 1 and generation 2 DAPC100 jumper arrangements, so the generic setup diagram must be checked against the actual board generation before any configuration change.
Features:
- Separate 24 VDC, serial and optical connections
- Distinct MC, M/F and process-I/O channel roles
- Generation-specific jumper and Tool settings
DAPC100 is a low-voltage control board inside an ASTAT assembly containing hazardous power circuits. Isolate the applicable main and auxiliary supplies and follow ABB electrical-safety instructions before physical work.
INTERCHANGEABILITY
Verify DAPC100 3ASC25H203 before replacement
Compare the complete 3ASC25H203 marking, DAPC100 designation, board generation and DARA assembly before selecting a replacement. ABB differentiates generation 1 boards with four optical pairs from generation 2 boards with three pairs. Do not transfer every jumper position by appearance or assume that a later suffixed spare has identical configuration requirements.
ABB requires the replacement board to carry the appropriate program version and motion parameters. Retain the correct ASTAT parameter file and confirm that the available ASTAT Tool release can communicate with the board. When a newer program introduces additional parameters, the Tool may assign defaults; those defaults require review against the intended motion before return to use.
The replacement guidance lists a PC, ASTAT Tool, a serial connection, the correct parameter file and a suitable 24 VDC supply. Its 10 A switched-supply or 2 A linear-supply figures address the preparation supply and switch-on demand, not a published continuous DAPC100 load. After transfer, verify communication, status indications and the motion-specific checks under the responsible maintenance procedure.
Features:
- Complete article, board generation and DARA match
- Program version and motion-parameter transfer review
- Supply preparation and post-transfer diagnostics
Do not treat a powered status display as proof of correct replacement. Program, motion parameters and generation-dependent settings must be verified before the motion is released for use.
ABB DAPC100 3ASC25H203 ASTAT Motion Control Board Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Features:
- Exact-model data for DAPC100 3ASC25H203
- ABB ASTAT hardware, safety and replacement references
- ABB Drives and ABB product directories
Documentation for DAPC100 3ASC25H203 must match the complete installed product identity, the documented ASTAT configuration and the supplied motion control board before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Reference size23 × 23 × 3 cm
-
Reference weight0.34 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginSweden
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about DAPC100 3ASC25H203
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How are program and motion settings transferred to a replacement DAPC100?
ABB calls for the correct program version and the parameter file for the particular motion, transferred with ASTAT Tool. A board that powers up is not necessarily configured for that motion. If a newer program adds parameters, review the defaults introduced by the Tool before acceptance; do not send proprietary project files as part of a routine quotation. -
Does DAPC100 3ASC25H203 contain 8 GB of industrial Flash?
That capacity is not supported by the AST10_054 technical data for DAPC100. ABB lists 512 Kbytes of onboard EPROM, 64 Kbytes of onboard RAM and 2 Kbytes of internal MCU RAM. These are three different memory resources; they should not be described as a removable 8 GB storage device. -
Which physical differences matter between generation 1 and generation 2 boards?
ABB distinguishes four optical pairs on generation 1 from three pairs on generation 2. The jumper tables also differ: generation 1 includes S2 and S3 serial-routing settings, while the generation 2 table lists S1 and S4. Identify the board generation before applying a jumper diagram; copying positions from another version is not a compatibility check. -
Why can ASTAT Tool fail to communicate with a powered DAPC100?
Power alone does not establish a serial connection. The PC communication settings, connection type and board baud rate must agree. ABB lists 9600, 19200, 38400 and 115200 bps, normally recommending 115200 bps. Check the applicable generation-specific routing and the serial connection before concluding that the control board is defective. -
Are the MC, M/F and I/O optical connections interchangeable?
No. The ABB connection reference assigns different roles: MC connects to a controller or another ASTAT for the specified communication arrangement; M/F links another ASTAT; I/O connects to the DAPU100 process-I/O board. A matching optical connector does not establish that a link belongs on the same channel. -
Is the 10 A preparation supply a continuous DAPC100 current rating?
No. ABB lists a 24 VDC, 10 A switched supply or a 2 A linear supply in its board-preparation guidance, with attention to the switch-on demand. This is not a continuous board-consumption specification. The independently verified board supply value is 24 VDC at X4; a continuous current rating is not asserted here. -
Can a two-digit DAPC100 display be interpreted without its software version?
Not reliably. ABB describes a fault indication that alternates F1 with an error code; code 31 identifies a DAPC100 error. Normal display behavior also varies with software: later versions can display the program version, while older versions use CPU-load or frequency indications. Interpret the sequence and software context together rather than treating every number as a fault. -
What distinguishes DAPC100 3ASC25H203 from DAPU100 in a distributor order?
The ASTAT spare-parts list assigns 3ASC25H203 to the DAPC100 control board and 3ASC25H204 to the DAPU100 I/O control board. They are separate functions and articles, not alternative names for one spare. A quotation should identify the actual board and software scope; cables, a PC Tool or a memory accessory are not assumed to accompany it.
READY TO VERIFY YOUR PART?
Get a DAPC100 3ASC25H203 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
DAPC100 3ASC25H203ASTAT Motion Control BoardManufacturer: ABBView Details
-
DSAV111DSAV 111 Video Generator ModuleManufacturer: ABBView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
