PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
NDBU-95C DDCS optical branching unit
ABB NDBU-95C DDCS optical branching unit for DriveWindow and DCS/ACS drive communication networks. Confirm the complete article identity, installed configuration and manufacturer documentation before ordering or replacement.
BEFORE YOU BUY
Confirm the complete DDCS optical branching unit
ACTUAL APPLICATIONS
Application context for NDBU-95C
Manufacturer documentation places the Ddcs Optical Branching Unit in practical drive applications. The three cases below describe different operating tasks in which NDBU-95C performs its documented product-family role with the configured companion equipment.
- 01 · OIL & GAS
Observe cooling-fan control with Ddcs Optical
In the automation chain for the air coolers, fan motors and temperature feedback, NDBU-95C supports the configured automation role as a Ddcs Optical Branching Unit. During ambient-load change, the system uses this function to trim fan speed to the measured cooling requirement, helping it hold outlet temperature without unnecessary fan power. - 02 · MACHINERY MANUFACTURING
Align robotic handling with Ddcs Optical process control
In the automation chain for the robots, grippers and transfer fixtures, NDBU-95C operates in its approved product-family role as a Ddcs Optical Branching Unit. During fault recovery, the system uses this function to restore the cell from a defined intermediate state, helping it resume material flow without losing part identity. - 03 · AUTOMOTIVE
Stabilize powertrain assembly with Ddcs Optical
In the automation chain for the machining cells and pallet systems, NDBU-95C performs its assigned control role as a Ddcs Optical Branching Unit. During quality-hold release, the system uses this function to hand off part identity with the machine sequence, helping it retain traceability at the next operation.
Technical specifications for NDBU-95C
-
Product ModelNDBU-95C
-
Product ParametersDDCS optical branching unit
-
In stock1 unit
-
ManufacturerABB
-
Supply Voltage24 V DC
-
Optical Channels9
-
Communication Speed1 Mbit/s
-
Optical Component Rate10 MBd
-
Maximum Transmitter Current50 mA
-
POF Cable Length0.1-30 m
-
HCS Cable Length0.1-200 m
-
Address Range76-124
-
MountingControl cabinet
-
Protection ClassIP20
View all additional
Alternative Names
NDBU 95C
ABB DCS and ACS drive systems DDCS optical branching unit
ABB DDCS optical branching unit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match NDBU-95C to the installed ABB DCS and ACS drive systems
ABB NDBU-95C is a DDCS optical branching unit used in the ABB DCS and ACS drive systems. Apply NDBU-95C only in the manufacturer-specified ABB DCS and ACS drive systems position. Match the complete article number, electrical interfaces and adjacent hardware before service.
Record connector keying, terminal assignments, shields, protective earth and neighboring assemblies for NDBU-95C; restore the same controlled arrangement during installation. Confirm maximum transmitter current (50 mA), pof cable length (0.1-30 m), the exact mechanical position and approved system configuration before connection.
After installing NDBU-95C, review system diagnostics and test the affected signals, communication or controlled equipment at a safe operating point. Record the final acceptance results. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: NDBU-95C
- Product class: DDCS optical branching unit
- Family: ABB DCS and ACS drive systems
The ABB NDBU-95C requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete NDBU-95C identity before exchange
Replace NDBU-95C only after matching the full article identity, DDCS optical branching unit, communication speed (1 Mbit/s) and documented system role. Confirm that the installed hardware version and controlled configuration agree with the manufacturer record.
Before removal, photograph the product label, mounting position, address range (76-124), cable routing, shields, earth connections and adjacent assemblies. Preserve the approved program, parameter set or network configuration needed for recovery.
After installation, verify mounting (Control cabinet) and protection class (IP20). Review diagnostics, test the affected function at a safe operating point and record the final maintenance acceptance evidence.
Features:
- Exact identity: NDBU-95C
- Address Range: 76-124
- Protection Class: IP20
The ABB NDBU-95C requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for NDBU-95C
- Installation checks matched to ABB DCS and ACS drive systems
- Exact ABB identity required before service
Documentation for ABB NDBU-95C must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30 × 22 × 8 cm
-
Shipping weight0.8 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85176200
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about NDBU-95C
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which supply voltage value must match when sourcing NDBU-95C?
NDBU-95C is documented with Supply Voltage 24 V DC. Compare this value, the full order number and installed system record before purchase. -
How should engineering verify optical channels for NDBU-95C?
Use the manufacturer data and installed configuration to confirm Optical Channels 9; retain the checked value in the replacement work pack. -
What does communication speed 1 Mbit/s mean for installing NDBU-95C?
The installation must satisfy Communication Speed 1 Mbit/s together with the documented power, interface, mounting and environmental limits for NDBU-95C. -
Which compatibility records should accompany a distributor quote for NDBU-95C?
Provide the complete model, quantity, nameplate photos, installed ABB DCS and ACS drive systems, required interfaces and destination country. Include project or network records when relevant. -
Can NDBU-95C replace a similar DDCS optical branching unit without configuration changes?
Do not decide by appearance. Match the full order number, hardware or firmware level, Optical Component Rate 10 MBd, interfaces and approved project before exchange. -
What should receiving inspection check on NDBU-95C before installation?
Check the exact label, housing, connectors, terminals, mounting points and supplied accessories. Reject damage, contamination, bent pins or unreadable identification. -
Which connection evidence should maintenance capture before removing NDBU-95C?
Photograph connector keying, cable destinations, port assignments, shields, protective earth and adjacent modules. Save the controlled configuration and current diagnostics. -
What commissioning result confirms NDBU-95C is ready for service?
Confirm normal diagnostics, communication and affected equipment response, then test the documented DDCS optical branching unit function under controlled conditions and record acceptance.
READY TO VERIFY YOUR PART?
Get a NDBU-95C quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
