PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Robots
- 3HNE09106-1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3HNE09106-1 cable pressure transducer
ABB 3HNE09106-1 is a cable pressure transducer in the ABB Robots. It is used to detect the specified process or machine condition and provide the corresponding signal.
Its documented configuration includes output signal of Standard 4-20 mA, operating temperature range of -40°C to +85°C, storage temperature range of -50°C to +100°C, and operating voltage of 24 VDC. During operation, the cable pressure transducer detects the target condition and converts it into the specified electrical or digital signal.
Its documented configuration includes output signal of Standard 4-20 mA, operating temperature range of -40°C to +85°C, storage temperature range of -50°C to +100°C, and operating voltage of 24 VDC. During operation, the cable pressure transducer detects the target condition and converts it into the specified electrical or digital signal.
BEFORE YOU BUY
Confirm the complete cable pressure transducer
ACTUAL APPLICATIONS
Where 3HNE09106-1 Fits Across Major Industry Sectors
Uses span power, paper and food, subject to verified compatibility, operating conditions and project requirements.
-
01 · POWER GENERATION
Nuclear Electricity Production and Gas Fired Power Generation
Nuclear electricity generation for regional utilities and industrial production.Gas-fired power generation supporting industrial and regional electricity demand. -
02 · PULP & PAPER
Packaging Board Production and Commercial Tissue Manufacturing
Packaging board production for consumer and industrial product distribution.Tissue manufacturing for household and commercial paper product markets. -
03 · FOOD & BEVERAGE
Sugar Production and Commercial Food Starch Manufacturing
Sugar production and refining for commercial food ingredient supply.Food starch manufacturing and processing for industrial ingredient markets.
Technical specifications for 3HNE09106-1
-
Product Model3HNE09106-1
-
Product Parameterscable pressure transducer
-
In stock1 unit
-
ManufacturerABB
-
Output SignalStandard 4-20 mA
-
Operating temperature range-40°C to +85°C
-
Storage temperature range-50°C to +100°C
-
Operating Voltage24 VDC
-
Exact Article Code3HNE09106-1
-
Product FamilyABB Robots
-
Component TypeCable Pressure Transducer
-
Assembly ClassABB PCB assembly
-
System InterfaceABB Robots control interface
-
Control SupplyDocumented rack control supply
-
Connector InterfaceKeyed ABB board connectors
-
Installation FormatPlug-in control board
-
Signal DomainControl and diagnostic signals
-
Service PositionDocumented rack slot
-
Configuration BasisInstalled ABB hardware list
View all additional
Alternative Names
3HNE09106 1
ABB cable pressure transducer
ABB Robots cable pressure transducer
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3HNE09106-1 to the installed ABB Robots
ABB 3HNE09106-1 is a cable pressure transducer for the ABB Robots. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare operating voltage (24 VDC), exact article code (3HNE09106-1) and product family (ABB Robots) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 3HNE09106-1
- Product class: cable pressure transducer
- Family: ABB Robots
The ABB 3HNE09106-1 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3HNE09106-1 identity before exchange
Replace 3HNE09106-1 only after matching the complete article code, cable pressure transducer, installed ABB Robots role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 3HNE09106-1
- Product class: cable pressure transducer
- Family check: ABB Robots
The ABB 3HNE09106-1 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for 3HNE09106-1
- Product family: ABB Robots
- Exact ABB identity required before service
Documentation for ABB 3HNE09106-1 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size24 × 18 × 6 cm
-
Shipping weight0.40 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginSweden
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3HNE09106-1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What diagnostics should maintenance review for 3HNE09106-1?
Review power, communication, gate, I/O or controller status relevant to 3HNE09106-1, then record resolved alarms. -
Which nameplate fields identify 3HNE09106-1 for a maintenance replacement?
Match the complete ABB article code 3HNE09106-1, its board or device designation, product family and installed position. -
Which connections must be recorded before removing 3HNE09106-1?
Photograph connector keying, terminal references, cable destinations, shields, earth points and neighboring assemblies used by 3HNE09106-1. -
Which configuration records should be backed up before replacing 3HNE09106-1?
Back up the hardware list, parameter set, controller project or converter configuration that identifies 3HNE09106-1. -
What records should remain with 3HNE09106-1 after service?
Keep receiving inspection, configuration backup, connection record, measured results and final acceptance with the 3HNE09106-1 service file. -
What receiving inspection is required for 3HNE09106-1?
Inspect the 3HNE09106-1 label, housing, terminals, connectors and packaging; record any damage or unreadable identification. -
What cabinet conditions should be checked for 3HNE09106-1?
Check secure mounting, ventilation, contamination, clearance and access around 3HNE09106-1 before service. -
Which photographs help a distributor source 3HNE09106-1?
Provide clear photos of the complete 3HNE09106-1 label, revision marks, connectors and installed equipment position.
READY TO VERIFY YOUR PART?
Get a 3HNE09106-1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
3HNE09106-1cable pressure transducerManufacturer: ABBView Details
-
3HNA006142-001smb-01 top assemblyManufacturer: ABBView Details
-
3HAC033388-001harness axis 1-6 cableManufacturer: ABBView Details -
3HAC7998-1Shielded Robot Signal CableManufacturer: ABBView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
