PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Robots
- 3HNP01219-1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3HNP01219-1 air flow sensor
ABB 3HNP01219-1 is an air flow sensor in the ABB Robots. It is used to detect the specified process or machine condition and provide the corresponding signal.
Its documented configuration includes flow range of 0.1–20 m/s (adjustable), output signal of 4–20mA (2-wire) or 0–10V DC, supply voltage of 24V DC (±10%) or 100–240V AC, and assembly class of ABB PCB assembly. During operation, the air flow sensor detects the target condition and converts it into the specified electrical or digital signal.
Its documented configuration includes flow range of 0.1–20 m/s (adjustable), output signal of 4–20mA (2-wire) or 0–10V DC, supply voltage of 24V DC (±10%) or 100–240V AC, and assembly class of ABB PCB assembly. During operation, the air flow sensor detects the target condition and converts it into the specified electrical or digital signal.
BEFORE YOU BUY
Confirm the complete air flow sensor
ACTUAL APPLICATIONS
Application context for 3HNP01219-1
Manufacturer documentation places the air flow sensor in practical generic applications. The three cases below describe different operating tasks in which 3HNP01219-1 performs its documented product-family role with the configured companion equipment.
-
01 · WATER & WASTEWATER
Regulate raw-water pumping with Air Flow process control
During operation of the intake pumps and wet wells, 3HNP01219-1 operates in its approved product-family role as a air flow sensor. During peak-flow demand, the system uses this function to coordinate pump duty and level response, helping it maintain hydraulic continuity. -
02 · POWER GENERATION
Align turbine auxiliary control with Air Flow
Across the lube-oil pumps and turning gear, 3HNP01219-1 provides its specified system function as a air flow sensor. During unit run-up, the system uses this function to coordinate permissives and auxiliary equipment states, helping it support a stable transition to rated operation. -
03 · FOOD & BEVERAGE
Protect aseptic filling with Air Flow process control
As part of the fillers and container conveyors, 3HNP01219-1 serves its documented function as a air flow sensor. During line-speed ramp, the system uses this function to keep container flow synchronized with filling demand, helping it move accepted containers toward inspection.
Technical specifications for 3HNP01219-1
-
Product Model3HNP01219-1
-
Product Parametersair flow sensor
-
In stock1 unit
-
ManufacturerABB
-
Flow Range0.1–20 m/s (adjustable)
-
Output Signal4–20mA (2-wire) or 0–10V DC
-
Supply Voltage24V DC (±10%) or 100–240V AC
-
Exact Article Code3HNP01219-1
-
Product FamilyABB Robots
-
Component TypeAir Flow Sensor
-
Assembly ClassABB PCB assembly
-
System InterfaceABB Robots control interface
-
Control SupplyDocumented rack control supply
-
Connector InterfaceKeyed ABB board connectors
-
Installation FormatPlug-in control board
-
Signal DomainControl and diagnostic signals
-
Service PositionDocumented rack slot
-
Configuration BasisInstalled ABB hardware list
-
Replacement BasisExact article and board revision
View all additional
Alternative Names
3HNP01219 1
ABB air flow sensor
ABB Robots air flow sensor
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3HNP01219-1 to the installed ABB Robots
ABB 3HNP01219-1 is a air flow sensor for the ABB Robots. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare exact article code (3HNP01219-1), product family (ABB Robots) and component type (Air Flow Sensor) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 3HNP01219-1
- Product class: air flow sensor
- Family: ABB Robots
The ABB 3HNP01219-1 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3HNP01219-1 identity before exchange
Replace 3HNP01219-1 only after matching the complete article code, air flow sensor, installed ABB Robots role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 3HNP01219-1
- Product class: air flow sensor
- Family check: ABB Robots
The ABB 3HNP01219-1 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for 3HNP01219-1
- Product family: ABB Robots
- Exact ABB identity required before service
Documentation for ABB 3HNP01219-1 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size28 × 22 × 10 cm
-
Shipping weight0.50 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginSweden
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3HNP01219-1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which photographs help a distributor source 3HNP01219-1?
Provide clear photos of the complete 3HNP01219-1 label, revision marks, connectors and installed equipment position. -
How should a distributor quote the exact 3HNP01219-1 assembly?
Quote ABB 3HNP01219-1, quantity, product family, visible revision marks and the destination equipment in the request. -
Which ABB system documents apply to 3HNP01219-1?
Use ABB documentation for ABB Robots and confirm that the exact 3HNP01219-1 assembly is covered by the hardware scope. -
How should the signal or power interface for 3HNP01219-1 be verified?
Compare every connected circuit with the controlled drawing and verify the approved electrical class before connecting 3HNP01219-1. -
Which electrical checks apply before energising 3HNP01219-1?
Confirm the documented supply, interface, insulation condition and protective earth before energising 3HNP01219-1. -
What commissioning evidence is needed after fitting 3HNP01219-1?
Record power-up status, diagnostics, the affected function test and final maintenance approval for 3HNP01219-1. -
Which companion hardware must match 3HNP01219-1?
Verify the documented rack, control unit, power stage, connector assembly and adjacent hardware paired with 3HNP01219-1. -
What drawings should engineering review before installing 3HNP01219-1?
Review the installed hardware list, cabinet drawing, connection diagram and controlled ABB Robots service documentation for 3HNP01219-1.
READY TO VERIFY YOUR PART?
Get a 3HNP01219-1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
