ACS 800

Safety functions module

Supply Voltage: 20–29 VDC
Power Consumption: 8 W (max)
Response Time: ≤15 ms
Isolation: 2500 VAC 
Operating Temperature: -25°C to +60°C

Inverter Protection Board

Analog Inputs:0–10 VDC or 4–20 mA
Relay Outputs:250 VAC, 8 A
Power Supply: 24 VDC ±10%
Power Consumption: <10 W
Operating Temperature: -20°C to +70°C
Storage Temperature: -40°C to +85°C
Humidity: 5% to 95% RH

ACS800 R2 to R6 STO Frequency Converter

Safety Category:Category 3 (EN 954-1) 
Response Time:≤ 20 ms
Supply Voltage:24 V DC ±10%
Power Consumption:≤ 2 W
Input Signal:24 V DC (Pulse test: 0.5 Hz, 1 ms)
Input Current:6 mA per channel
Isolation Reinforced isolation : 500 V AC

ACS800 Drive Board

Input Voltage:380–480 V AC
DC Link Voltage:540–650 V DC
Auxiliary Voltage:24 V DC
Product Line:ABB ACS800 Industrial Drives 
Isolation Voltage:2.5 kV AC

ACS800 Drive Board

Input Voltage:380–480 V AC (±10%)
DC Link Voltage:540–650 V DC
Protections:DC over/undervoltage
Auxiliary Voltage:24 V DC 
Isolation Voltage:2.5 kV AC

MAIN CIRCUIT INTERFACE BOARD

Input Voltage:200–480 V AC
DC Link Voltage:280–650 V DC 
Auxiliary Voltage 24 V DC
PWR (Green): 24V OK
RDY (Yellow): Drive ready
ERR (Red): Fault detected
Isolation Voltage:2.5 kV AC

MC INTERFACE BOARD

CANopen
Modbus RTU
PROFIBUS DP
Input Voltage Range: 24 V DC 
Operating Temperature: -25°C to +70°C
Storage Temperature: -40°C to +85°C
Humidity: 5% to 95% (non-condensing)

DDCS Communication Option Module

Supply Voltage: 24V DC (±10%)
Power Consumption: <5W (typical)
Operating Current: 200mA @ 24V DC
Communication Speed: Up to 12Mbps
Optical: ST or BFOC type
Electrical: Terminal block or D-sub

DDCS Branching Unit

Protocol: ABB DDCS 
Baud Rate: 12Mbps
Supply Voltage: 24V DC (±10%)
Power Consumption: 10W typical
Isolation: 500V AC
Fiber Type: Multi-mode 62.5/125μm

Interface Board

Input Voltage:24V DC (±10%)
Power Consumption:8W (typical)
Isolation Voltage:1500V AC (channel-to-channel)
Communication Speed:Up to 1Mbps
Signal Channels:16 digital I/O

CHOPPER CONTROL BOARD

Model Number:NBRC-61C (61357246F)
Type:Chopper Control Board
Operating Voltage:24V DC (±10%)
Power Consumption:8W (typical)
Signal Levels:0-10V analog, 24V digital
Isolation Voltage:1500V AC (input-to-output)
PWM Frequency:2kHz (adjustable)
Current Regulation:±1% of setpoint
Response Time:<5ms (90% step change)
Resolution:12-bit (analog signals)

DDCS Communications Module

DDCS COMMUNICATION MODULE
SPARE KIT
64606964
DDCS COMMUNICATION BOARD 3

COMMUNICATIONS ADAPTER

COMMUNICATIONS ADAPTER
RS-232 TO RS-485
3 METER RJ11 COMMUNICATIONS CABLE
FOR DRIVE WINDOWS LIGHT

Field Kit

BRAKING CHOPPER
AIR COOL
690V
1/9MIN
600AMP MAX

Control Module

Input Voltage: 24V DC 
Current Consumption: 100-500mA 
Power Rating: Usually around 5-10W
Operating Temperature: -20°C to +60°C
Storage Temperature: -40°C to +85°C
Humidity: 5% to 95% non-condensing

Communication adapter

20-pin pinheader
4 transmitter/receiver connector pairs for fiber optic cable.
Type: Agilent Technologies Versatile Link. 
Communicationspeed: 1, 2 or 4 Mbit/s
Operating voltage: +5 V DC ±10%
Current consumption: 200 mA max
Electromagnetic immunity: IEC 1000-4-2

MC Interface Board

Input Voltage: Typically 24 V DC
Current Consumption:100-200 mA
Operating Temperature: -20°C to 60°C
Storage Temperature:-40°C and 85°C
Humidity: 5% to 95% non-condensing humidity

CONTROL UNIT

24 VDC ±10%
250 mA
1200 mA 
1 = not used; 2 = +24 V; 3 = 0 V