ALL MANUFACTURERS

AC Servo Drive Amplifier Controller

Input: 200–690 V AC
Output: Matches input voltage 
Power Range:0.75 kW to 560 kW
Current Rating:1,300 A
Torque accuracy: ±5% (SLVC mode)
Speed control range: 1:100 (SLVC)

Terminal board Module

Voltage: 380–690V AC (±10%), 3-phase
Frequency: 50/60 Hz.
Nominal: 930V DC
Control Circuit Voltage: 24V DC (±15%)
Analog inputs :0–10V, 4–20mA
Temperature: -10°C to +50°C (derate 2% per °C above 40°C)
Humidity: <95% non-condensing

Terminal board Module

Voltage: 380–690V AC (±10%), 3-phase
Frequency: 50/60 Hz.
Nominal: 930V DC
Control Circuit Voltage: 24V DC (±15%)
Analog inputs :0–10V, 4–20mA
Temperature: -10°C to +50°C (derate 2% per °C above 40°C)
Humidity: <95% non-condensing

Pressure clamp terminal block

With dual-redundant 
pressure clamp terminal block for digital input 
Rated Voltage:24–60 V DC 
Current Rating:≤4 A 
Contact Resistance:≤10 mΩ
Isolation Voltage:500 V AC
Operating Temperature:-40°C to +85°C

Pressure clamp terminal block

STD4A00
PRESSURE CLAMP TERMINAL
With dual-redundant 
pressure clamp terminal block for digital input 

Pressure clamp terminal block

With dual-redundant 
pressure clamp terminal block for digital input 
Rated Voltage:24–60 V DC 
Current Rating:≤4 A 
Contact Resistance:≤10 mΩ
Isolation Voltage:500 V AC
Operating Temperature:-40°C to +85°C

Pressure clamp terminal block

With dual-redundant 
pressure clamp terminal block for analog 
Rated Voltage: 30 V AC
Current Rating:≤4 A 
Contact Resistance:≤10 mΩ
Isolation Voltage:300 V AC
Terminal Material :Tin-plated copper alloy
Operating Temperature:-40°C to +85°C

Pressure clamp terminal block

With dual-redundant 
pressure clamp terminal block for analog 
Rated Voltage: 30 V AC
Current Rating:≤4 A 
Contact Resistance:≤10 mΩ
Isolation Voltage:300 V AC
Terminal Material :Tin-plated copper alloy
Operating Temperature:-40°C to +85°C

Pressure clamp terminal block

With dual-redundant 
pressure clamp terminal block
Rated Voltage:300 V AC/DC
Current Rating:10–20 A 
Contact Resistance:≤5 mΩ
Isolation Voltage:500 V AC
Contact Material:Tin-plated copper alloy
Operating Temperature:-40°C to +85°C

Pressure clamp terminal block

With dual-redundant 
pressure clamp terminal block for digital input 
Rated Voltage:300 V AC/DC
Current Rating:10–20 A 
Contact Resistance:≤5 mΩ
Isolation Voltage:500 V AC
Contact Material:Tin-plated copper alloy.
Operating Temperature:-40°C to +85°C

Pressure clamp terminal block

With dual-redundant 
pressure clamp terminal block for digital input 
Rated Voltage:300 V AC/DC
Current Rating:10–20 A 
Contact Resistance:≤5 mΩ
Isolation Voltage:500 V AC
Contact Material:Tin-plated copper alloy
Operating Temperature:-40°C to +85°C

IGBT Module

Max Collector-Emitter Voltage:1000 V
Rated Collector Current:1700 A 
Max Pulsed Current :3000–3400 A
Gate-Emitter Voltage:±20 V
Switching Frequency Range:0.5 kHz – 5 kHz

IGBT Module

High speed switching
Voltage drive
Low Inductance module structure
Inverter for Motor Drive
AC and DC Servo Drive Amplifier
Uninterruptible Power Supply
Industrial machines, such as Welding machines

IGBT Module

Max Collector-Emitter Voltage:1400 V
Rated Collector Current:120 A 
Max Power Dissipation:400–600 W
Gate-Emitter Voltage: ±20 V
Switching Frequency Range:1 kHz – 20 kHz
Temperature:150°C – 175°C

CONTROL UNIT

Processor:32-bit/64-bit microprocessor 
Clock Speed: 500 MHz to 1 GHz
RAM: 512 MB – 2 GB
Flash Storage: 1–4 GB
Max I/O Points: Configurable up to 1,000+ points
Fieldbus: PROFIBUS DP
Standard: -25°C to +70°C (-13°F to +158°F)

Analog Input Module

Input Type Current (2-wire or self-powered transmitters)
Input Channels 16 Channels (16 Single Ended)
Common Mode Rejection Ratio, dc to 60 Hz 70 dB
A/D Converter Resolution 16 bits
Input Range 4-20 mA (through 200 Ω)
Normal Mode Rejection Ratio, at 60 Hz 20 dB
Normal Mode Filter Response Single-pole RC, -3 dB @ 6.0 Hz
Maximum Normal Mode Input ± 30 Volts

Interface board

Power Supply: 24 VDC (±10%) or 110–240 VAC
1–2 x RJ45 Ethernet ports.
Serial ports (RS-232/485) for legacy devices
Fiber-optic or coaxial connectors
Operating Temperature: -20°C to +60°C
Humidity: 5–95% non-condensing

Digital input module

Input Type:24V DC
Number of Channels:16 channels per module 
Input Voltage Range:ON State: 15–35V DC
OFF State: 0–5V DC
Input Current: Typical: 3–7 mA 
Update Rate: ≤ 10 ms 
Operating Temperature: -40°C to +70°C (-40°F to +158°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)

Pressductor PillowBlock Load cells

Rated Load: Up to 1000 kN
Overload Protection: 200% of rated capacity
Accuracy: ±0.1% FS (full-scale linearity).
Output Signal Analog: 4–20 mA (2-wire), ±10V DC
Output Signal Digital: Optional Profibus DP, Modbus RTU 
Excitation Voltage: 10–30V DC
Frequency Response: ≤1 kHz 

Pressductor PillowBlock Load cells

Compression/Tension: Up to 500 kN 
Overload Protection: 150% of rated capacity
Accuracy: ±0.1% of full scale (FS) linearity error
Output Signal :Analog: 4–20 mA or ±10V DC
Rated Excitation Voltage: 10–15V DC
Bridge Resistance: 350 Ω ±1%.
Operating Temperature: 
-40°C to +120°C (-40°F to +248°F)

ANALOG MODULE

Analog Inputs: 8–16 channels
Voltage Ranges: ±10V, 0–10V, 1–5V
Current Ranges: 4–20 mA, 0–20 mA
Analog Outputs: 4–8 channels
Voltage: 0–10V, ±10V
Current: 4–20 mA
Resolution:16-bit ADC/DAC

Hlai/sti galvanic isolator module

Description : HLAI/STI FTA, GI/IS MC-GAIH13
CE compliant, conformally coated
Redundancy
Channels : 16
Galvanically Isolated
Terminals : Compression
Size B : 12 inches (307 mm)

Power supply

Input Voltage AC Input: 100–240V AC (±10%), 50/60 Hz
Current: 10A
Efficiency: ≥85% (typical)
Operating Temperature: -25°C to +70°C (-13°F to +158°F).
Storage Temperature: -40°C to +85°C (-40°F to +185°F).
Certifications: CE, UL, IEC 61131-2, RoHS

PROBE LOW TEMP 20FT PH

Measuring Range: 0–14 pH.
Process Fluid: 0°C to 50°C (32°F to 122°F)
Response Time: ≤30 seconds
Cable: 20 feet shielded, UV-resistant
Pressure Rating: ≤5 bar (72.5 psi) 
Calibration: 2–3 point calibration

Analog Input Module

ANALOG INPUT MODULE
24VDC
16 CHANNEL
Absolute accuracy
Correct conversion over the full range
Crosstalk between inputs
Channel input filters
Internal supply voltages