ALL MANUFACTURERS

Analog Input Module

Points:32, commoned
Nominal input current:4–20 mA DC
Operational current range:2–22 mA DC
Absolute maximum field voltage:33 V DC
Absolute maximum reverse field voltage:– 0.6 V DC
Absolute maximum input current:50 mA DC
Input bandwidth (3dB):16 Hz
Source impedance:180 Ω
Resolution:12 bits
Absolute error:0.15% of full scale (20 mA)
Diagnostic:Force-to-value diagnostic (FVD)

Digital Input Module

Points:32, commoned
Nominal input voltage:24 V DC
Operational voltage range:15–30 V DC
Absolute maximum input voltage:33 V DC
Absolute maximum reverse input voltage:–0.6 V DC
Input delay:<10 ms, On to Off or Off to On
ADC scan time:<1 ms for all 32 points

Analog Output Module

Type:TMR
Resolution:12 bits
Diagnostic:Forced-switch diagnostic (FSD)
Points:4, commoned-return
Output current range:4–20 mA output, controlled
External loop power:32 V DC, maximum24 V DC, nominal

Digital Output Module

Points:16, commoned
Nominal output voltage:24 VDC
Specified operational voltage range:15 to 30 VDC
Absolute maximum output voltage:33 VDC
Absolute maximum reverse input voltage:– 0.6 VDC
Leakage to load (Off state):<1 mA
Diagnostic glitch duration <2 ms, maximum:500 Ps, typical
On state voltage drop:<1.0 VDC @ 1.5 A

Embedded CPU Board

Motorola PowerPC
SDRAM: 128 MB–1 GB
Non-Volatile Storage: 4–32 MB Flash
1–2 x 10/100BASE-T Ethernet 
2–4 x RS-232/422/485
CRT/VGA output

Single-board

Processor Module Assembly
10/100 Ethernet (RJ-45)
2–4 x RS-232/422/485
Support for MIL-STD-1553
Clock Speed: 500 MHz–1.2 GHz
VMEbus Interface: VME64x

Remote I/O Controller Module

I/O Channels: 4–20 mA
Scalability: 8–16 I/O points per module 
Data Transfer Speed: Up to 100 Mbps 
Voltage: 18–32 VDC
Current Draw: <2 A typical 
Operating Temperature: –40°C to +70°C 
Storage Temperature: –50°C to +85°C
Humidity: 5–95% RH (non-condensing)

Industrial Motherboard

Slots: 1–2 x SODIMM slots
Capacity: Up to 16–32 GB
Chipset: Intel H110/Q170 or AMD
Network:2–4 x Gigabit Ethernet
Power Input:12–24 V DC
Wide operating temperature:(-40°C to +85°C with proper airflow)
Humidity tolerance: 5–95% (non-condensing)

Actuator

SQM10.16502 
Actuator
10Nm
90°/29s
130°/42s
5 aux switches
start torque 15Nm
AC230V

BASEPLATE

BASEPLATE
ANALOG I/0 MODULE
W/HEAT SINK
Supports 8/16-channel analog I/O modules

SMC Flex Interface Board

INTERFACE BOARD
SMC FLEX INTERFACE PCB BOARD
FOR SOFTSTART
Input Voltage:24V DC
Communication Ports:RS-485, EtherNet/IP
Current/Power Ratings:5A at 240V AC
Analog I/O: Standard 0-10V

Safety Relay

Safety Relay F123
Stop category 0
Safety category 4
2 Safety contacts
1 Semiconductor outputwith short circuit protection
Crossfault monitoring
Monitored or automaticreset
Tested for light curtainapplications (24V)

OPERATOR PANEL

OPERATOR PANEL
PMU
PARAMETER ASSIGNMENT UNIT
FOR DESIGNS C / D
SIMOVERT MASTERDRIVES

FLAT RIBBON CABLE

FLAT RIBBON CABLE 
POWER INTERFACE 
POWER UNIT A7111-XF1

Normalizing module

Normalizing module 
ABO For devices 
DC 510-620V, 590A

Power supply module

PSU2 Power Board 
Power supply module 
Nominal Voltage: 400 VAC
Input Range: 380 VAC – 480 VAC 
Frequency: 45–65 Hz
Output Voltage: 24 VDC 
Output Current: Typically 10 A
Power Rating: 240 W

Thermal sensor

Thermal sensor
THERMAL DETECTOR
FOR ACQUISITION OF HEAT SINK TEMPERATURE
Operating Range: -25°C to +150°C
Accuracy:±1.5°C 
Response Time:<1 second
Operating Voltage: 24 VDC
Shock/Vibration Resistance: 5–100 Hz

Control Unit

CUA31 Control Unit 
Adapter for PM340/PM240-2 
Power Modules

DC speed regulator cable

DC speed regulator cable
Flat ribbon cable 
Power Interface 
Allocation Board A7126-X108

Normalizing module

Normalizing module 
ABO For devices
3 AC 660-690V and 
DC 890-930V
171A

Inverter control module

SIMOVERT MASTERDRIVES 
Inverter control module 
IGD2 for devices 660-690 V AC 3
50/60 Hz and 890-930 V DC
60 A and 82 A

Normalizing module

Normalizing module 
ABO for devices 660-690 V 
3 AC and 890-930 V DC
82 A
Input Voltage (DC Link): 890–930 V DC
Rated Braking Current: 82 A continuous
Compatible AC Line Voltage Range: 660–690 V
Mains Connection Terminals: 3-phase AC supply

Inverter Board

Siemens MM440 Inverter
Voltage Range: 3-phase 380–480V AC (±10%)
Current Rating:up to 200A
Power Output: 0.37 kW to 250 kW
Switching Frequency: 2–16 kHz
Communication Interfaces: 0–10V, 4–20mA

PLC RELAY BOARD

SSB MODULE
PLC RELAY BOARD
Simovert Master Drives
K80 Option

DRIVE-CLIQ CABLE

SINAMICS DRIVE-CLIQ 
CABLE IP20/IP20 
LENGTH: 1.45 M