PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- Simatic DP
- 6ES7972-0AB01-0XA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7972-0AB01-0XA0 PROFIBUS network diagnostic repeater
Siemens 6ES7972-0AB01-0XA0 is a diagnostic repeater for SIMATIC PROFIBUS networks. It supports documented network-segment diagnostics and electrical signal regeneration in configured distributed automation.
The repeater operates from a 24 V DC supply and supports PROFIBUS rates from 9.6 kbit/s to 12 Mbit/s. Its FastConnect IDC bus connection and separate supply terminal block define the installation arrangement. The IP20 enclosure requires suitable cabinet protection, and the documented segment limits and topology govern use.
The repeater operates from a 24 V DC supply and supports PROFIBUS rates from 9.6 kbit/s to 12 Mbit/s. Its FastConnect IDC bus connection and separate supply terminal block define the installation arrangement. The IP20 enclosure requires suitable cabinet protection, and the documented segment limits and topology govern use.
BEFORE YOU BUY
Confirm the complete profibus network diagnostic repeater
ACTUAL APPLICATIONS
Application context for 6ES7972-0AB01-0XA0
Siemens 6ES7972-0AB01-0XA0 is a diagnostic repeater for SIMATIC PROFIBUS networks. It serves compatible automation in industrial manufacturing, chemical processing, water and wastewater. Suitable use requires the documented companion hardware, electrical connections and configured production process.
-
01 · INDUSTRIAL MANUFACTURING
Manufacturing Production and Industrial Process Coordination
Industrial Component ManufacturingAutomated Production Line Coordination -
02 · CHEMICAL PROCESSING
Industrial Chemical Production and Process Manufacturing
Chemical Production Process AutomationFine Chemical Manufacturing -
03 · WATER & WASTEWATER
Water Treatment and Industrial Wastewater Processing
Municipal Drinking Water TreatmentIndustrial Wastewater Process Treatment
Technical specifications for 6ES7972-0AB01-0XA0
-
Product Model6ES7972-0AB01-0XA0
-
Product ParametersPROFIBUS network diagnostic repeater
-
In stock5 units
-
ManufacturerSiemens
-
Rated supply24 V DC, 20.4 to 28.8 V
-
PROFIBUS data-rate range9.6 kbit/s to 12 Mbit/s
-
Protection degreeIP20
-
Operating temperature0 to +60 ℃
-
Storage temperature-40 to +70 ℃
-
Relative humidity95% at 25 ℃, non-condensing
-
Supply connectionTerminal block
-
Bus termination connectionFastConnect IDC
-
Connection reuse10 clamping cycles
View all additional
Alternative Names
6ES7972-0AB01-0XA0
SIMATIC PROFIBUS diagnostic repeater PROFIBUS network diagnostic repeater
PROFIBUS diagnostic repeater 24 V DC, 20.4 to 28.8 V rated supply
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7972-0AB01-0XA0 profibus network diagnostic repeater
Siemens 6ES7972-0AB01-0XA0 is a diagnostic repeater for SIMATIC PROFIBUS networks. It supports documented network-segment diagnostics and electrical signal regeneration in configured distributed automation.
Compare rated supply (24 V DC), supply voltage range (20.4 to 28.8 V DC) and profibus minimum rate (9.6 kbit/s) with the installed SIMATIC PROFIBUS diagnostic repeater configuration. Match the supply connections and documented companion hardware before connection.
Use the applicable SIMATIC PROFIBUS diagnostic repeater instructions for wiring and commissioning. Test the affected functions of 6ES7972-0AB01-0XA0, review its status indications and record the accepted settings with the equipment documentation.
Features:
- Rated supply: 24 V DC, 20.4 to 28.8 V
- PROFIBUS data-rate range: 9.6 kbit/s to 12 Mbit/s
- Protection degree: IP20
The 6ES7972-0AB01-0XA0 profibus network diagnostic repeater requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6ES7972-0AB01-0XA0 profibus network diagnostic repeater
Replace 6ES7972-0AB01-0XA0 only after matching its complete article, SIMATIC PROFIBUS diagnostic repeater role and installed interface configuration. Related order numbers do not establish interchangeability.
Record the existing profibus network diagnostic repeater connections and preserve the configured SIMATIC PROFIBUS diagnostic repeater settings before removal. Photograph connector keying, cable labels and the supplied article identification.
After fitting the verified 6ES7972-0AB01-0XA0, restore the documented settings and test the affected functions at a safe operating point. Retain its receiving inspection and functional acceptance results with the asset record.
Features:
- Rated supply: 24 V DC, 20.4 to 28.8 V
- PROFIBUS data-rate range: 9.6 kbit/s to 12 Mbit/s
- Protection degree: IP20
The 6ES7972-0AB01-0XA0 profibus network diagnostic repeater requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6ES7972-0AB01-0XA0 profibus network diagnostic repeater must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size8 × 12.5 × 6.75 cm
-
Shipping weight0.30kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7972-0AB01-0XA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What network is the AB01 diagnostic repeater designed for?
The repeater is specified for SIMATIC PROFIBUS network-segment diagnostics. -
What is its maximum PROFIBUS transmission rate?
The documented maximum transmission rate is 12 Mbit/s. -
Which DC supply tolerance applies to the diagnostic repeater?
The specified input range is 20.4 to 28.8 V DC. -
What termination method is used for its bus wiring?
The bus connection uses the documented FastConnect IDC arrangement. -
How many clamping cycles are specified for this connection?
The documented connection reuse limit is ten clamping cycles. -
Does its enclosure provide outdoor field protection?
Its IP20 protection requires an appropriate protected installation environment. -
What topology information should be supplied with a diagnostic-repeater inquiry?
Provide the AB01 article, PROFIBUS segment layout, bus rate and existing diagnostic arrangement. -
Which repeater connection details should be checked on arrival?
Inspect the complete AB01 identity, FastConnect bus terminals and separate supply terminal block.
READY TO VERIFY YOUR PART?
Get a 6ES7972-0AB01-0XA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
