ALL MANUFACTURERS

EMC FILTER 3 PHAS

Type: 3-Phase EMC Filter
Rated Voltage: 480 VAC or 400 VAC
Rated Current: 16 A to 29 A
Frequency Range: 50 Hz to 60 Hz
Attenuation:150 kHz to 30 MHz
Operating Temperature Range: -25°C to +85°C
Storage Temperature Range: -40°C to +85°C

CVMI Board

Voltage Input Range:24 VDC or 110/220 VAC
Current Input: 1-10 A 
Power Supply: 24 VDC or 48 VDC 
Operating Temperature Range: -20°C to +60°C
Storage Temperature Range: -40°C to +85°C

Interface Board

Operating Voltage:Typically 24V DC
Temperature Range:-20°C to 60

Circuit Board

Operating Voltage:Typically 24V DC
Temperature Range:-20°C to 60°C

Infineon Technologies IGBT Module

Collector-Emitter Voltage: 1700 V
Continuous Collector Current: 1000 A at 25°C
Gate-Emitter Voltage : ±20 V
Power Dissipation : 6000 W
Junction Temperature : -40°C to +150°C
Case Temperature : Up to 125°C

Inverter Drive

Power Rating:5.5 kW
Phase:3
Supply Voltage:400 V ac
Current Rating:13.8 A
For Use With:AC Motors
Series:ACS310
Field Bus Communication Type:ModBus
IP Rating:IP20
Output Frequency:0 → 500Hz
STO:No
Drive Type:AC
Mounting Type:Module For Cabinet Building

TACHOMETER CARD

Type: Tachometer Card
Series: SADC
Input Type:0-10 V or 4-20 mA output
Input Voltage Range:0 to 10 V DC
Operating Temperature Range:-20°C to +70°C
Storage Temperature Range:-40°C to +85°C

Paralleling & Protection Unit

Input Voltage:110/220 VAC or 24 VDC
Frequency Range:50 Hz or 60 Hz
Operating Temperature:
-20°C to +60°C (-4°F to +140°F)
Storage Temperature:
-40°C to +85°C (-40°F to +185°F)
Humidity:
5–95% RH

Panel Keyboard Operator

Input Voltage Range: 0–30 VDC
Output Voltage Range: 0–30 VDC
Output Current: Up to 2 A per channel
Input Voltage: 24 VDC ±10%
Power Consumption: ≤10 W
Operating Temperature: -40°C to +85°C
Storage Temperature: -55°C to +100°C
Humidity: 5–95% RH

Inverter Protection Board

Analog Inputs:0–10 VDC or 4–20 mA
Relay Outputs:250 VAC, 8 A
Power Supply: 24 VDC ±10%
Power Consumption: <10 W
Operating Temperature: -20°C to +70°C
Storage Temperature: -40°C to +85°C
Humidity: 5% to 95% RH

Temperature Transmitter

Enhanced display with local operator interface (LOI)
LCD display
Integral transient protection
Enhanced accuracy and stability
Transmitter-sensor matching with 
Callendar-Van Dusenconstants
Variety of enclosures

Control Board

Input Voltage: 24 V DC
Operating Temperature:0°C to +55°C
Storage Temperature:-20°C to +70°C 
Humidity:5% to 95%

VARISTOR BOARD MODULE

THICK FILM HYBRID
VARISTOR
BOARD MODULE
58926451

Robot Electronic Calibrator SEMD

The thinner cable is the signal cable. 
It connects theSEMD or MEMD to the mastering box. 
The thicker cableis the EtherCAT cable. 
It is connected to the mastering boxand to the robot at X32.
Description of adjusting set withSEMD and MEMD 
(Micro Electronic Mastering Device)

Robot Servo Motor

Rated Power: 2.5 kW
Rated Speed: 3000 RPM (supports high-speed operation)
Rated Voltage: 400 V (3-phase AC)
Rated Current: 6 A
Rated Frequency: 50 Hz
Torque Constant: 6.5 Nm/A
Noise Level: 68 dB(A) at rated load 

Gear-motor

Rated Power: 1.5 kW
Rated Speed: 1500 RPM 
Rated Voltage: 400 V (3-phase AC)
Rated Current: 4 A
Rated Frequency: 50 Hz
Insulation Class: F 
Gear Ratio: 10:1 

Servo Motor

Rated Power: 5.0 kW
Rated Speed: 3000 RPM (high-speed capability with variable speed control)
Rated Voltage: 400 V (3-phase AC)
Rated Current: 12.5 A
Rated Frequency: 50 Hz
Torque Constant: 22 Nm/A
Service Factor: 1.2 

Servo Motor

Rated Power: 7.5 kW
Rated Speed: 3000 RPM (variable speed operation)
Rated Voltage: 400 V (3-phase AC)
Rated Current: 16 A
Rated Frequency: 50 Hz
Torque Constant: 28 Nm/A
Service Factor: 1.4 

Servo Motor

Rated Power: 5.5 kW
Rated Speed: 3000 RPM (Variable speed capability)
Rated Voltage: 400 V (3-phase AC)
Rated Current: 12 A
Rated Frequency: 50 Hz
Torque Constant: 18 Nm/A
Service Factor: 1.5 

MOTOR AXIS

Rated Power: 6.5 kW
Rated Speed: 3000 RPM (Variable Speed)
Rated Voltage: 400 V (3-phase AC)
Rated Current: 13 A
Rated Frequency: 50 Hz
Torque Constant: 24 Nm/A
Service Factor: 1.3

MOTOR AXIS

Rated Power: 5 kW
Rated Speed: 3000 RPM (Variable Speed)
Rated Voltage: 400 V (3-phase AC)
Rated Current: 11 A
Rated Frequency: 50 Hz
Insulation Class: F (operates up to 155°C)
Torque Constant: 22 Nm/A
Service Factor: 1.5 

MOTOR AXIS

Rated Power: 4.5 kW
Rated Speed: 3000 RPM (Variable Speed)
Rated Voltage: 400 V (3-phase AC)
Rated Current: 10 A
Rated Frequency: 50 Hz
Insulation Class: F (resistant up to 155°C)
Torque Constant: 18 Nm/A
Service Factor: 1.3 

Robot Motor

Rated Power: 5 kW
Rated Speed: 3000 RPM (Variable Speed)
Rated Voltage: 400 V (3-phase AC)
Rated Current: 10 A
Rated Frequency: 50 Hz
Insulation Class: F (up to 155°C)
Torque Constant: 15 Nm/A

AC MOTOR

Frame Size: 160 mm
Rated Power: 11 kW
Rated Speed: 1500 RPM (Synchronous Speed)
Rated Voltage: 400 V (3-phase AC)
Rated Current: 20 A
Rated Frequency: 50 Hz
Efficiency Class: IE3 (Premium Efficiency)
Cooling Method: IC411 (Self-ventilated, Fan-cooled)
Protection Class: IP55 (Dust-tight and protected against water jets)
Insulation Class: F (up to 155°C)

AC MOTOR

Frame Size: 200 mm
Rated Power: 45 kW
Rated Speed: 1500 RPM (Synchronous Speed)
Rated Voltage: 400 V (3-phase AC)
Rated Current: 80 A
Rated Frequency: 50 Hz
Cooling Method: IC411 (Self-ventilated, Fan-cooled)
Protection Class: IP55 (Dust-tight and protected against water jets)
Insulation Class: F (up to 155°C)