Harmony-07
Control Processor Module
High-performance processing unit for real-time control and data processing
Supports industrial communication protocols such as Modbus, Profibus, Ethernet/IP
24V DC
-20°C to +60°C
SPK800-PBA1-01
Cable
1.0 Meter
PBA800 interface
HN800 device interface
Supports TER8x0 terminator to redundant PBA800 adapters for connection
Digital signal transmission
TRL810K2
Terminal Module
8 channels
Analog or digital input/output, depending on the specific configuration
Typically 24V DC or as required by the system
20°C to +60°C
NTRO05-A
Digital Output Module
5 channels
Relay output or transistor output
4 V DC or 120 V AC output, depending on configuration
Maximum output current per channel: 1 A
24 V DC power supply
Input Voltage:24 V DC
Power Consumption:≤ 8 W
Time Sync Input:IRIG-B (modulated/dc level)
Signal Voltage:TTL/RS-422 compatible (0–5 V DC)
Accuracy:±1 ms
Time Resolution:1 ms
Isolation:1500 V AC
SPSEM11
SOE Master Module
Sequence of Events Recording
Accurate to millisecond level
Typically supports Ethernet, MODBUS, or other industrial protocols
Operating temperature range: -20°C to +60°C
PHARPSPEP21013
Power Entry Panel
Dual Chassis Design
Typically supports AC or DC input, depending on the application
Appropriate current based on load requirements
Safety Category:Category 3 (EN 954-1)
Response Time:≤ 20 ms
Supply Voltage:24 V DC ±10%
Power Consumption:≤ 2 W
Input Signal:24 V DC (Pulse test: 0.5 Hz, 1 ms)
Input Current:6 mA per channel
IsolationReinforced isolation : 500 V AC
Number of outputs 16-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 3.4 A minimum
Maximum leak current at output off status 1.6 mA
Output format Current source
Minimum load current 35 mA
Load resistance range 120 to 685 Ω
Output response time 30 ms maximum
Blocking Voltage 4500 V DC
Reverse Voltage:30 V
Max RMS Current:4000 A
Peak Surge Current :32 kA
Turn-On Time: ≤ 3 µs
Turn-Off Time: ≤ 5 µs
Switching Loss: ≤ 15 kJ/s at 500 Hz
Input Channels:32
Galvanic Isolation:1000 VAC RMS
Isolation Technique:Optical (in IOM)
DI Power Voltage Range:18 to 30 VDC
ON Sense Voltage/Current:13 VDC (min) or 3 mA (min)
OFF Sense Voltage/Current:5 VDC (max) or 1.2 mA (max)
Input Impedance:4.2 K
Absolute Delay Across Input Filter and Isolation:5 ms ± 20%
Rated Voltage:380–480 V AC, 3-phase (±10%)
Rated Current:100 A (at 40°C ambient)
Frequency:50/60 Hz
Leakage Current:< 5 mA (at 480 V AC)
Insulation Resistance:> 100 MΩ (500 V DC)
Dielectric Strength:3000 V AC
3-phase AC: 380–480 V AC
DC Bus Voltage:520–720 V DC
Power Rating:Typically 1–50 kW
Operating Temperature:-10°C to +50°C
Storage Temperature:-40°C to +85°C
