
Digital Input Module
1771IAN
DISCONTINUED BY MANUFACTURER
INPUT MODULE
32 POINT
85-138 VAC
DOVER FLEXO
TRUE TENSION INDICATOR
50/60 HZ
Tariff Code: 8538903000
Country of Origin: United States
Redundant Memory Exchange Module
Series:Rx7i PACsystem
Part Number:IC698RMX016
Series:PACSystem RX7i
Description:Communication module
Part Number:IC698RMX016
Current:1.8 Amperes
Product Description:Redundancy Memory Exchange Module
Voltage:5 Volts DC
Memory:16 MB SDRAM
Insertion Loss:0.35 dB
Current requirements:1.8A
Return Loss:-30dB
Power supply module
Series:Rx7i PACsystem
Manufacturer:GE Intelligent Platforms (Former); Emerson Automation (Current)
Part Number:IC698PSA100
Description:Power supply module
Ride through time:15 ms
Slot Assignment:Slot 0
Voltage:120/240 Volts AC, 125 Volts DC
Mounting:Leftmost slot
Input Voltage Range:85 to 264 VAC; 100-150VDC
Power Rating:125 Watts
Nominal Input frequency:120/240 VAC, 125VDC
Output Voltage:5/12, -12 Volts DC
AC Input Frequency:47-63 Hz
Power Factor:0.99 min
Isolation:1500 Volts
Holdup Time:5 ms
Ride Through:15 milliseconds
Logix5555 Processor 3.5MB Non-Volatile Memory
1756L55M24
DISCONTINUED BY MANUFACTURER 2011-03-30
CPU MODULE
CONTROLLOGIX
LOGIX5555
WITH 3.5 MB NONVOLATILE RAM
1756-L55 BASE WITH 1756-M24 MEM BOARD
Processor Module
1764LSP
DISCONTINUED BY MANUFACTURER 06/2017
MICROLOGIX 1500
PROCESSOR MODULE
7.65K MEMORY
300 MA
5 VDC
MICROLOGIX 1500 STANDARD PROCESSOR UNIT
7.65K USER WORDS
USER-CONFIGURABLE PROGRAM AND MEMORY AMOUNTS
Tariff Code: 8537109060
Country of Origin: United States, Korea
Compact I/O Boolean Control Module
1769BOOLEAN
SPECIALTY MODULE
COMPACTLOGIX
BOOLEAN
8 REAL INPUTS 10-30VDC
8 VIRTUAL INPUTS
4 SOURCING OUTPUTS .5A @20.4A26.4VDC
CLOSED LOOP TIMEOF 1 MS
Tariff Code: 8537109060
Country of Origin: Malaysia
CompactLogix Solid State Output Module Ser A
1769OV16
I/O MODULE
COMPACTLOGIX
16 POINT
SOLID STATE
DC SINK OUTPUT
24 VOLT DC
Tariff Code: 8538907080
Country of Origin: Malaysia
PCI6224
DISCONTINUED BY MANUFACTURER
DATA ACQUISITION CARD
32 ANALOG INPUTS
16-BIT
250 KS/S
MULTIFUNCTION I/O DEVICE
DAQ CAPABILITIES
NI-DAQMX DRIVER AND CONFIGURATION UTILITY
Analog Output Module
1756OF8H
OUTPUT MODULE
CONTROLLOGIX
ANALOG
8 POINT
SINGLE ENDED POINT OUTPUTS
HART PROTOCOL
CURRENT AND VOLTAGE
Davitu Motor Driver
Category: Motor Drivers
Stepper Motor: Supports two-phase or three-phase stepper motors
Operating Voltage Range: 24V DC to 48V DC
Max Output Current: 5A continuous current, each phase supports different current settings
Power Consumption: Typical power consumption is about 20W
Operating Temperature: -20°C to+50°C
Storage Temperature: -40°C to +85°C
ICSM06A6 Analog I/O Remote Unit
ICSM06A6
DISCONTINUED BY MANUFACTURER
I/O MODULE
ANALOG
REMOTE
5W
24VDC
Tariff Code: 8538907080
Analog Input Module
Number of Input Channels: 8
Input Signal Type: 0 to 20 mA
Resolution: 12-bit
Input Impedance: 250 Ω
Nominal Input Current: 0 to 20 mA
Input Voltage Drop: Maximum 5V
Scanning Time: 10 ms per channel
Accuracy: ±0.1% of full-scale range
Isolation: Galvanic isolation between channels and system
Power Consumption: Typically 1.5 W
Operating Temperature: -25°C to +70°C
CPU MODULE
Manufacturer:GE Fanuc
Series:Series 90-70
Part Number:IC697CPM790
Number of Installation Slots:1
Number of LEDs:4
Product Type:CPU
Serial protocol support:RS485
Communication Route:Through the Backplane
Emergency Shutdown Functions:Supported
Standalone C Program:Required
Configurable Program and Data Memory:Supported
Specialty function:Triple Modular Redundancy (TMR)
CPU Baseplate
Manufacturer:GE Fanuc
Series:Series 90-30
No. of CPU slots:One (1)
Part Number:IC693CHS397
Number of Slots:5
Default rack address:Rack number 0
No. of I/O slots:Four (4)
Slot 1 assignment:CPU / Specialty modules
I/O Expansion Bus Connector:1
Mounting:Panel Mounting
Installation Rack:Rack 0
Current load:270 mA
P/S Slot:Power Supply Module
Bus voltage:+5VDC
SLC 5/01 Controller
1747L511
DISCONTINUED BY MANUFACTURER 2017-01-30
SLC 5/01 1K CONTROLLER
CPU MODULE
SLC 5/01
1 K RAM MEMORY
0.35 AMP
5 VDC
Country of Origin: Japan
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.