ALL MANUFACTURERS

Current Input Module

Number of input channels 16 channels, module isolation
Rated input range 4 to 20 mA
Permissible input range 0 to 25 mA
Input impedance during Power-OFF 500 kΩ minimum
Data update frequency 40 ms
Temperature drift ±16 µA/10 °C
Withstand voltage 1.5 kV AC between input signal and system for 1 minute

Current Input Module

Number of input channels 16 channels, module isolation
Rated input range 4 to 20 mA
Input impedance during Power-OFF 500 kΩ minimum
Data update frequency 40 ms
Temperature drift ±16 µA/10 °C
Withstand voltage 1.5 kV AC between input signal and system for 1 minute

Output Module

Number of outputs 8-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 5 A minimum
Maximum leak current at output offstatus 1.6 mA
Output format Current source
Minimum load current 35 mA
Load resistance range 40 to 685 Ω 
Output response time 30 ms maximum

Digital Output unit

Number of outputs 4-channel, module isolation 
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 10 A minimum
Output format Current source
Maximum load current 2 A/output line (8 A in total output lines) (*4)
Minimum load current 100 mA
Load resistance range 12 to 240 Ω (*6)

Expansion Card

Product type:Controller
IP rating:IP20
Manufacturer:Carel
Power Supply:24Vac/Vdc
Accessory type:General Accessories
Board type:pCO expansions

Input Output Module

Analog Inputs:0-10V or 4-20m
Digital Outputs:24V DC
Analog Outputs: 0-10V or 4-20mA
Power Supply:24V DC
Digital Inputs: Typically 8 or 16 digital inputs

2-Phase Stepper Motor Driver

Operation method:Unipolar constant current drive
Applied Motor:2-phase stepper motor
Resolution:Intelligent type
Power supply:24-35VDC 
Max. Run Current:2A/Phase
Max. Current Consumption:3A
Number Of Axes:1-axis
Environment_Ambient temperature:0 to 50℃, storage: -10 to 60℃
Environment_Ambient humidity:35 to 85% RH, storage: 35 to 85% RH

Dynalco Digital Indicator Panel

Dynalco Part No.: LMD-120D
Description: Current Loop-Powered Digital Indicator
Input Signal: 4–20 mA or 10–50 mA, jumper-selectable
Loop Burden: 2 volts maximum, i.e. 100 Ohms at 20 mA
Display: 3½ digits standard; 
4½ digits with fixed zero at right-most digit. 
Selectable decimal point.
Span and zero adjust: 
25-turn potentiometers permit span adjustment from 
100 up to 2000 units, and zero adjustment 
from – 1000 up to +1000 units
Accuracy: 0.1% linearity, 
0.5% stability over the environmental range

Synchronizing relay

SYNCHRONIZING RELAY
48/250 V
57-120 VAC

POWER SUPPLY

AC/AC converter for wall mounting
Voltage regulatedConvection cooling
4-channel AC output, individually monitored
Robust housing
Vibration proof

GuardLogix 5580 Safety Controller

User memory:10 megabytes
Safety memory:5 megabytes
Digital I/O / Analog I/O:128,000 / 4000 max
Ethernet performance:10/100/1000 megabits per second
Current draw at 1.2 Volts DC:5.0 milli Amps
Current draw at 5.1 Volts DC:1.2 Amps

CONTROL MODULE

4139145401S1FX
CONTROL MODULE
SMC-FLEX
STANDARD
120-240 VAC
FLEX QUICK START
150-FS1FX

RTD Input Module

Input Voltage:24V DC
Input Current:10-20 mA
Signal Input Range:0-24V DC
Input Channels:8 or 16
Operating Temperature:-10°C to +60°C 
Storage Temperature:-40°C to +85°C

Digital input Module

Input Voltage:24V DC
Input Current:10-20 mA
Signal Input Range:0-24V DC
Input Channels:8 or 16
Operating Temperature:-10°C to +60°C 
Storage Temperature:-40°C to +85°C

Fieldbus Communication Module

Input Voltage:24V DC
Current Consumption:Typically 100-200 mA
Fieldbus Power:24V DC 
Operating Temperature:Typically -10°C to +60°C
Storage Temperature:-40°C to +85°C

CANopen Communication Module

Communication profile CiA 301 
Number of installed NFLC121 modules 4 max. for FCN-500
Number of slave devices 126 slave devices per 
CANopen Communication Module
Node Bootup
SYNC producer
Heartbeat Consumer/Producer

Relay Output Module

Number of output channels 16
Rated applied voltage 24 to 125 V DC 
100 to 240 V AC, 50/60 Hz
Output response time 12 ms or less
Maximum current consumption 780 mA (5 V DC)
External connection Pressure clamp terminal

Frequency Input Module

Number of input channels 8, isolated channels
Input signal (*1) Contact ON/OFF, voltage pulse
Input frequency 0.1 Hz to 10 kHz
Frequency accuracy 0.1% of reading
Minimum input pulse width 40 μs
Shunt resistance Select from OFF/1000 Ω
Pull-up resistance 68 kΩ (12 V DC or 24 V DC)
Data refresh cycle 10ms
Maximum current consumption 300 mA (5 V DC), 400 mA (24 V DC)

Power Supply Module

100 to 120 V AC
Duplex configuration: Possible
Hot-Swap: Possible
Rated output: +5.1 V DC, 7.8 A
Analog field power supply: Input: 24 V DC ±10 %, 4 A, 
Duplexed (matching-diode)• LED: SYS 
(5 V system power output ON)
FLD (24 V field power supply ON)
Checking terminals: +5 V, +24 V

SB bus repeat module

Transmission method Serial communication
Baud rate 128 Mbps
Transmission distance Max. 8 m per line
Extension units Max. 2 units
Duplex configuration Possible
Supplyvoltage 5 V DC±5%
Currentdissipation Max. 500 mA

Power supply module

Rated input voltage:220 to 240 V AC
Input voltage range:170 to 264 V AC (rms)
Input frequency:47 to 66 Hz (Rating: 50/60 Hz)
Input current: Max. 0.7 A
Fuse rating:3.15 A
Leak current Max. :1 mA
Withstanding voltage:3000 V AC for 1 minute
Insulation resistance:50 MΩ at 500 V DC

Analog Input Module

Input signal 4 to 20 mA 
Allowable input current 24 mA 
Accuracy ±0.1% of full scale 
Overcurrent protection Provided 
Data refresh cycle 10 ms
Input step response time 100 ms
Temperature drift Max. ±0.01%/°C

Base module

Operation -40 to +70 °C 
Transportation/storage -40 to +85 °C
Dust 0.3 mg/m3 or less
Protection class IP20
Altitude 3000 m or less
Electric field 3 V/m or less (26 MHz to 1 GH
Magnetic field 30 A/m (AC) or less, 400 A/m (DC) or less

ENGINE MANAGEMENT SYSTEM

ENGINE MANAGEMENT SYSTEM
Pentium® 133 MHz PC
32 MB of RAM
DOS 6.22, Windows® 95
DIGITAL
100 HZ MAX. FREQUENCY
5 V OUTPUT
RS-232 COMMUNICATION PORT

OVERSPEED MONITOR

LOW SPEED : 1677 Hz
OVERS SPEED : 12077 Hz
INPUT POWER : 24V DC 50mA
RELAY CONTACTS : 30V DC 2A
GROUPS A,B,C,D T5 -20'C TO +85'C