
PowerFlex 753 AC DRIVE
AC DRIVE
AIR COOLED
POWERFLEX 753
AC INPUT WITH PRECHARGE
IP20/IP00
OPEN TYPE
480 VAC / 650 VDC
300 KW / 400 HP
477 AMP
FILTERING
JUMPER INSTALLED
NO INTERNAL TRANSISTOR
NO HIM
OUTPUT MODULE
OUTPUT MODULE
POINT I/O
DIGITAL
DC
4 POINTS SINKING 24 VDC OUTPUT
ELECTRONICALLY PROTECTED
OPEN STYLE
DIN MOUNTED
Stratix Managed Switches
UNMANAGED ETHERNET SWITCH
STRATIX 2000 3+1 PORT
3-PORT 10/100 MBPS COPPER
(FULL OR HALF DUPLEX)
AND 1-PORT 100BASE-FX MULTIMODE FIBER
(LC CONNECTOR)
UNMANAGED
20V AC/ 24V DC POWER
OPERATOR INTERFACE
Part Number/Catalog No.:2711P-K4M5A
Product Line:Panelview Plus 400
Display Size:3.5 inch
Display Color:Grayscale
Input Type:Keypad
Communication:RS-232 Port
Input Power:AC
Memory:64 MB
Series:A, B, C, D, E
POINT I/O Digital DC Sinking Output Module
Series:POINT I/O
Module Type:Digital DC Sinking Output Modules
Outputs:2
Output Voltage:24 Volts DC
Electronically Protected:Yes
POINTBus Current:75 milliamps
Output Current:2 amps/module
Power Dissipation:0.8 Watts
Thermal Dissipation:2.7 BTU/hour
MicroLogix 1500 Base Unit
I/O Rating:2 inputs/ 12 outputs
No. of Inputs:12 inputs
Input Voltage:120 Volts AC
Input channel Voltage:120 VAC
Output Source Relay:Port
No. of Outputs:12 outputs
Max Expanded I/O Count:512
Output channel Voltage:24-125VDC; 120-240VAC
Power Supply Voltage:85-265 VAC
PowerFlex 753 AC Drive
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:361 Amps, 300HP ND, 250HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered
CM jumper installed (preferred)
PowerFlex 753 AC Drive
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:361 Amps, 300HP ND, 250HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered
CM jumper installed (preferred)
PowerFlex 753 AC Drive
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:361 Amps, 300HP ND, 250HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered
CM jumper installed (preferred)
PowerFlex 753 AC Drive
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:361 Amps, 300HP ND, 250HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered
CM jumper installed (preferred)
PowerFlex 753 AC Drive
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:302 Amps, 250HP ND, 200HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered,
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
PowerFlex 753 AC Drive
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:302 Amps, 250HP ND, 200HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered,
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
PowerFlex 753 AC Drive
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:302 Amps, 250HP ND, 200HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered,
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
PowerFlex 753 AC Drive
Bulletin Number:PowerFlex 753 AC Drive,
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:302 Amps, 250HP ND, 200HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered,
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
Analog Combination Module
Product Type:nalog Combination Module
Product Series:Distributed I/O
Analog Inputs:8
Operating Voltage:24V DC
Response Time:20 ms
Current Consumption:0.8 A max.
Input Resolution:12 bits
Terminal Block Torque:0.51 Nm
Analog Outputs:4
ControlLogix Integrated Motion module
Gain Resolution:32- bit floating point
Servo output Type:Analog Voltage
Voltage Range:±10V dc
Analog output resolution 16 bits
Discrete outputs:Solid-state isolated relay contacts
Discrete output operating voltage:24VDC, Nominal.
Axes per Module:2
Axes per Controller:32
Backplane Current (5Volts):700 milliamps
Backplane Current (24Volts):2.5 milliamps
ControlLogix Discrete output module
Outputs:8
Module Type:Digital AC Output Module
Voltage:120-240 Volts AC
Voltage Category:120 / 240 Volts AC
Operating Voltage Range:74-265 Volts AC
Current per point:0.5 A @ 60 °C (140 °F)
Current per group, max:2 A @ 60 °C (140 °F)
Backplane Current at 5 Volts:200 mA
Isolation Voltage:50 Volts Continuous
Power Dissipation:(Max) 5.1 W @ 60 °C (140 °F)
Backplane Current at 24 Volts:2 mA
SIL 3 PLe Safety Partner
PLC CONTROLLER
GUARDLOGIX
SAFETY PARTNER
EXTREME ENVIRONMENT
CHASSIS MOUNT
-25 TO 70 DEGREES C
ControlLogix Processor Module
Series:ControlLogix
Module Type:Processor Module
I-O Memory:0.98 MB
User Memory:8 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 milliamps
Current Draw (5.1 Volts DC):800 milliamps
Power Dissipation:2.5 Watts
Thermal Dissipation:8.5 BTU per hour
Isolation Voltage:30 Volts Continuous
GuardLogix Controller
Series:ControlLogix
Module Type:GuardLogix Controller
I-O Memory:0.98 MB
User Memory:4 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 Miliamperes
ControlLogix Processor Module
Series:ControlLogix
Module Type:Processor Module
I-O Memory:0.98 MB
User Memory:2 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 Miliamperes
GuardLogix Controller
Series:ControlLogix
Module Type:GuardLogix Controller
Current Draw (1.2 Volts DC):5 milliamps
Current Draw (5.1 Volts):802 milliamps
Power Dissipation:2.5 Watts
Thermal Dissipation:8.5 BTU per hour
Isolation Voltage:30 Volts Continuous
ControlLogix Processor Module
Series:ControlLogix
Module Type:Processor Module
I-O Memory:0.98 MB
User Memory:32 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 milliamps
Current Draw (5.1 Volts):800 milliamps
Power Dissipation:2.5 Watts
Thermal Dissipation:8.5 BTU per hour
Isolation Voltage:30 Volts Continuous
GuardLogix Controller
Module Type:GuardLogix Controller
I-O Memory:0.98 MB
User Memory:9 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 Miliamperes
Current Draw (5.1 Volts DC):800 Miliamperes
Power Dissipation:2.5 Watts
Thermal Dissipation:8.5 BTU per hour
Isolation Voltage:30 Volts Continuous
Armor ControlLogix Controller
Standard Memory:4 Megabytes
I/O Memory:0.98 Megabytes
Max Total I/O:128,000
Max Analog I/O:4000
Max Digital I/O:128,000
Ethernet Ports:4 Ethernet M12 Category 5E
USB Ports:USB 1.1 Full Speed (12 Mbps)
Nom Input Voltage:24 Volts DC
Input Voltage Range:18-32 Volts DC
Enclosure Type:UL Type 4/4x
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.