PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Allen-Bradley
- 41391-454-01-S1FX
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
41391-454-01-S1FX Standard soft-starter control module
Allen-Bradley 41391-454-01-S1FX is the standard replacement control module for compatible SMC Flex soft starters. Rockwell identifies the internal module as 150-FS1FX and assigns this replacement to the 100–240 V control-input version of the 200–600 V SMC Flex controller range.
The module combines the control electronics, keypad and display used to configure and monitor an assembled SMC Flex starter. Its control-terminal interfaces handle the documented start, stop and auxiliary functions, while the fitted power poles perform motor switching. The module must match the controller revision, control voltage and standard operating option; pump and braking replacement modules have separate catalog numbers.
The module combines the control electronics, keypad and display used to configure and monitor an assembled SMC Flex starter. Its control-terminal interfaces handle the documented start, stop and auxiliary functions, while the fitted power poles perform motor switching. The module must match the controller revision, control voltage and standard operating option; pump and braking replacement modules have separate catalog numbers.
BEFORE YOU BUY
Confirm the complete standard soft-starter control module
ACTUAL APPLICATIONS
Application context for 41391-454-01-S1FX
41391-454-01-S1FX is a standard soft-starter control module in the SMC Flex range. Its compatible configurations serve water & wastewater, mining, industrial manufacturing. Suitability depends on the complete article, matched interfaces and documented equipment configuration.
-
01 · WATER & WASTEWATER
Municipal Water Supply and Wastewater Treatment
Municipal Water SupplyIndustrial Wastewater Treatment -
02 · MINING
Metal Ore Mining and Mineral Processing
Metal Ore MiningMineral Processing and Beneficiation -
03 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Automated Production
Industrial Manufacturing ProductionManufacturing Process Automation
Technical specifications for 41391-454-01-S1FX
-
Product Model41391-454-01-S1FX
-
Product ParametersStandard soft-starter control module
-
In stock3 units
-
ManufacturerAllen-Bradley
-
Control input voltage100–240 V AC
-
Control supply frequency50/60 Hz
-
Compatible starter line voltage200–600 V AC
-
Control terminal strip length5.6–8.6 mm
-
Display constructionBacklit LCD
-
Display capacity3 lines, 16 characters per line
-
Keypad5 keys
-
Auxiliary contacts4 configurable contacts
-
DPI peripheral capacity2 devices
-
DPI maximum output current280 mA
-
Serial interfaceDPI
-
DataLink word length16 bits
-
Control terminal wire size0.75–2.5 mm²
-
Control terminal torque0.6 N·m
-
Soft-start time setting0–30 s
View all additional
Alternative Names
41391-454-01-S1FX
SMC Flex Standard soft-starter control module
Standard soft-starter control module 41391-454-01-S1FX
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 41391-454-01-S1FX standard soft-starter control module
Allen-Bradley 41391-454-01-S1FX is the standard replacement control module for compatible SMC Flex soft starters. Rockwell identifies the internal module as 150-FS1FX and assigns this replacement to the 100–240 V control-input version of the 200–600 V SMC Flex controller range.
Match 41391-454-01-S1FX to the installed SMC Flex configuration. Compare the supply, electrical interfaces, connectors and companion equipment with the applicable drawing before reconnecting the article.
Preserve the approved configuration and complete the documented checks for the connected standard soft-starter control module. Record the verified connections and final operating results with the equipment record.
Features:
- Control input voltage: 100–240 V AC
- Control supply frequency: 50/60 Hz
- Compatible starter line voltage: 200–600 V AC
The 41391-454-01-S1FX standard soft-starter control module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 41391-454-01-S1FX standard soft-starter control module
Verify the complete 41391-454-01-S1FX identity and its standard soft-starter control module role before exchange. Match the installed revision, electrical interfaces and companion hardware; a similar housing does not establish interchangeability.
Record the wiring, grounding, connector allocation and configuration associated with 41391-454-01-S1FX. Isolate the affected equipment according to its applicable instructions before disconnecting the article.
After fitting the verified 41391-454-01-S1FX, restore the approved connections and configuration. Complete the affected signal, communication or power checks and retain the acceptance results for the supplied article.
Features:
- Control input voltage: 100–240 V AC
- Control supply frequency: 50/60 Hz
- Compatible starter line voltage: 200–600 V AC
The 41391-454-01-S1FX standard soft-starter control module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 41391-454-01-S1FX standard soft-starter control module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size12.30 × 24.80 × 7.00 cm
-
Shipping weight0.90kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 41391-454-01-S1FX
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the documented role of 41391-454-01-S1FX?
Allen-Bradley 41391-454-01-S1FX is the standard replacement control module for compatible SMC Flex soft starters. Rockwell identifies the internal module as 150-FS1FX and assigns this replacement to the 100–240 V control-input version of the 200–600 V SMC Flex controller range. -
Which interfaces distinguish 41391-454-01-S1FX?
The module combines the control electronics, keypad and display used to configure and monitor an assembled SMC Flex starter. Its control-terminal interfaces handle the documented start, stop and auxiliary functions, while the fitted power poles perform motor switching. The module must match the controller revision, control voltage and standard operating option; pump and braking replacement modules have separate catalog numbers. -
Which control input voltage applies to 41391-454-01-S1FX?
100–240 V AC is the supported value for 41391-454-01-S1FX. Preserve the associated electrical and companion-hardware configuration. -
What does control supply frequency specify for 41391-454-01-S1FX?
50/60 Hz. This describes the identified standard soft-starter control module and does not establish ratings for a different article. -
What must be recorded before exchanging 41391-454-01-S1FX?
Record the wiring, grounding, connector allocation and configuration associated with 41391-454-01-S1FX. Isolate the affected equipment according to its applicable instructions before disconnecting the article. -
Which acceptance check follows a 41391-454-01-S1FX replacement?
After fitting the verified 41391-454-01-S1FX, restore the approved connections and configuration. Complete the affected signal, communication or power checks and retain the acceptance results for the supplied article. -
Which identification should accompany a 41391-454-01-S1FX order?
Provide 41391-454-01-S1FX, quantity, installed-equipment identification and connector photographs. State whether the request includes companion hardware or only the standard soft-starter control module. -
What should be inspected when 41391-454-01-S1FX arrives?
Compare the 41391-454-01-S1FX label, connector arrangement and physical condition with the ordered article. Record any discrepancy before fitting it to the SMC Flex equipment.
READY TO VERIFY YOUR PART?
Get a 41391-454-01-S1FX quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
