
























3300 NSv Proximity Probes
330904 3300 NSv Probe
M8X1 thread, witharmor
Minimum unthreaded length:20 mm
Minimum length: 140 mm
05 0.5 meter (20 in)
02 Miniature coaxial ClickLoc connector
standard cable
05 Multiple Approvals
Bently Nevada Proximitor Probe Extension Cable
Product no : 21747-045-01
Product type : Proximitor Probe Extension Cable
Cable length option : 045 = 4.5 metre (177 inches)
Armor option : 01 = with armor
Velomitor Piezo-velocity Sensor
04 1/4 - 20 UNC
00 Not required
Sensitivity:3.94mV/mm/s (100 mV/in/s)±5%.
Velocity Range:1270 mm/s (50 in/s) peak
Output BiasVoltage:-12 ±3.0 VDC
DynamicOutputImpedance :Less than 2400 Ω
OperatingTemperatureRange:-55°C to 121°C(-67°F to 250°F)
3300 XL 8 mm Probe
3300 XL 8 mm Probe
3/8-24 UNFthread
without armor
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx Approvals
Velomitor Piezo-velocity Sensor
01 1/2 - 20 UNF
00 Not required
Sensitivity3.94mV/mm/s (100 mV/in/s)±5%
Velocity Range 1270 mm/s (50 in/s) peak
Output BiasVoltage-12 ±3.0 VDC
overtemperature referenced toPin A
3300 XL 8 mm Proximity Probe
3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required
Extension Cable
PROBE PROXIMITY SENSOR
CABLE EXTENSION 121FT
Impedance/Capacitance:±200 mV/mil typical
Extreme temperatures:+200°C/+392°F
Maximum Cumulative Length: typically 1,000–2,000 ft
3300 XL Standard Extension Cable
085 8.5 meters (27.9 feet)
12 FluidLoc cable with connectorprotector
05 CSA, ATEX, IECEx Approvals
3300 XL Standard Extension Cable
Dynamic Pressure Monitor
3 wiretransducer :10 kΩ
2 wire:1.5 MΩ to 3.5 MΩ typical
Dynamicpressure:100 mV/psi (1.45 mV/mBar)
Output Impedance :550 Ω
3 wire:-24 Vdc
3300 XL 8 mm Probe
330103 3300 XL 8 mm Probe
M10 x 1 thread,without armor
Minimum unthreaded length: 10 mm
Minimum case length: 40 mm
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx Approvals
TK3 Proximity System Test Kit
Electric Driven TK-3e
02 Metric
01 American
Air:90 psi (6.2 bar) maximum
Electric :95-125 Vac, 50/60 Hz, 1Aminimum
190-250 Vac, 50/60 Hz, 1Aminimum
VibrationAmplitudeRange:50 μm to 254 μm
FILED MONITOR
POWER SUPPLY
24 VDC
FILED MONITOR
+18 V to +36 V DC Input Voltage Range
30 Amp pk Nominal Inrush Current
Over Voltage Protection
3300 5mm Proximity Probes
330173 3300 5mm Probe,
M8 x 1 thread,without armo
Minimum unthreaded length: 0 0 = 0.0mm
Minimum unthreaded length: 0 6 = 60mm
1 0 1.0 metre (3.3 feet)
0 2Miniature coaxial ClickLocconnector
standard cable
3300 5mm Proximity Probes
330173 3300 5mm Probe
M8 x 1 thread,without armo
Minimum unthreaded length: 0 0 = 0.0mm
Minimum unthreaded length: 0 2 = 20mm
1 0 1.0 metre (3.3 feet)
0 2Miniature coaxial ClickLocconnector
standard cable
3300 5mm Proximity Probes
330173 3300 5mm Probe,
M8 x 1 thread,without armo
Minimum unthreaded length: 0 0 = 0.0mm
Minimum unthreaded length: 0 7= 70mm
1 0 1.0 metre (3.3 feet)
0 2Miniature coaxial ClickLocconnector
standard cable
3300 5mm Proximity Probes
330173 3300 5mm Probe,
M8 x 1 thread,without armo
Minimum unthreaded length: 0 0 = 0.0mm
Minimum unthreaded length: 0 3= 30mm
1 0 1.0 metre (3.3 feet)
0 2Miniature coaxial ClickLocconnector
standard cable
3300 5mm Proximity Probes
330173 3300 5mm Probe,
M8 x 1 thread,without armo
Minimum unthreaded length: 0 0 = 0.0mm
Minimum unthreaded length: 0 9= 90mm
1 0 1.0 metre (3.3 feet)
0 2Miniature coaxial ClickLocconnector
standard cable
Seismic Transmitter
00 0 – 12.7 mm/s (0 – 0.5 in/s)
01 10 Hz to 1 kHz
05 Multiple Approvals
Seismic Transmitter
Accelerometers
0 1 ¼-28 UNF integral stud
0 0 None
InputVoltage -24 ± 0.5 Vdc.
Bias Current 2 mA nominal.
Output BiasVoltage: -8.5 ± 0.5 Vdc.
3300 XL 11 mm Probe
3300 XL 11 mm Probe
1/2-20 UNFthread
without armor
10 1.0 meter (3.3 feet)
11Miniature coaxial ClickLocconnector
with connectorprotector, FluidLoc cable
05 Multiple Approvals
Order in increments of 0.1 in
Threaded length configurations:
Maximum case length: 9.9 in
Minimum case length: 1.0 in
Example: 2 4 = 2.4 in
Interconnect Cable
Product Type : Interconnect Cable
Model : 16710 - TEIP11-PS I/P Converter, signal converter for standard signals, with power stage
Cable Length Option : 20 - 20 ft
3300 XL 8 mm Proximity Probes
3300 XL 8 mm Probe
M10 x 1 thread
without armor
Order in increments of 10 mm
Metric thread configurations:
Maximum case length: 250 mm
Minimum case length: 20 mm
Example: 0 6 = 60 mm
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLoc
connector, standard cable
00 Not required
Probe Proximity Vibration
Proximity Vibration Probe
±0.25 mm to ±10 mm
Standard 4-wire or 2-wire
-40°C to +120°C
4-20 mA

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.