PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Male-to-male standard mounting stud, 1/4-28 UNF to M10 x 1.0
Bently Nevada 135826-01 is a standard male-to-male mounting stud listed among the accessories for the 177230 Seismic Transmitter. The official accessory table specifies a 1/4-28 UNF connection at one end and an M10 x 1.0 connection at the other.
The stud provides a mechanical mounting interface, not a vibration transmitter or electrical signal converter. Match both thread specifications to the intended installation and retain the complete part number when ordering. The reviewed manufacturer document does not publish separate stud dimensions, material or tightening instructions.
The stud provides a mechanical mounting interface, not a vibration transmitter or electrical signal converter. Match both thread specifications to the intended installation and retain the complete part number when ordering. The reviewed manufacturer document does not publish separate stud dimensions, material or tightening instructions.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 135826-01
These uses are supported by the applicable manufacturer documentation. Series-level guidance does not prove that this complete order was installed in a particular customer project.
-
01 · PLC monitoring
Machine vibration points connected to PLC control systems
The 177230 family can supply machinery condition information to a PLC. Where the mounting arrangement requires its documented 1/4-28 UNF to M10 x 1.0 accessory, 135826-01 provides the mechanical interface; the transmitter performs the measurement and signal conversion. -
02 · DCS maintenance
Process machinery monitoring within plant DCS architecture
The official transmitter literature describes condition monitoring integrated with a DCS to support maintenance planning. This stud is a mounting accessory for the documented transmitter family, not a DCS interface module, and its two threads must match the selected mechanical installation. -
03 · SCADA asset systems
Plant asset vibration monitoring with SCADA integration
The 177230 family supports SCADA-linked asset condition monitoring. A correctly selected mounting stud supplies the local mechanical connection at the measurement point; it does not provide the SCADA communication, signal wiring or vibration processing described for the monitoring system.
Technical specifications for 135826-01
-
Product Model135826-01
-
Product ParametersMale-to-male sensor mounting stud
-
In stock1 unit
-
ManufacturerBently Nevada
-
Connection formMale-to-male standard stud
-
Imperial thread1/4-28 UNF
-
Metric threadM10 x 1.0
-
Documented accessory context177230 Seismic Transmitter, Studs and Adapters table
View all additional
Alternative Names
135826-01 standard mounting stud
1/4-28 UNF to M10 x 1.0 male stud
Bently Nevada 177230 mounting accessory
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
177230 SEISMIC TRANSMITTER MOUNTING ACCESSORIES
Mechanical mounting within a seismic-transmitter installation
The 177230 Seismic Transmitter family is documented for integration with PLC, DCS and SCADA systems. In that arrangement the transmitter measures vibration, while the mounting accessory provides a mechanical connection at the machine measurement point.
The manufacturer lists 135826-01 as a male-to-male 1/4-28 UNF to M10 x 1.0 standard stud. The transmitter's documented mounting hole is 1/4-28 UNF; the chosen installation must also match the stud's metric interface.
The accessory table is not an independent installation drawing for the stud. Confirm the actual assembly, required dimensions and controlled mounting procedure without transferring transmitter electrical ratings, physical dimensions or tightening values to this separate part.
Features:
- Mechanical accessory rather than a transmitter or signal converter
- Documented 1/4-28 UNF and M10 x 1.0 male interfaces
- 177230 family accessory context with installation-specific fit checks
The Bently Nevada 135826-01 mechanical thread adaptation for a seismic-transmitter mounting point requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Retain the complete 135826-01 part number when comparing a replacement. Other studs and adapters in the same table have different threads, connection forms or construction descriptions; a shared accessory table does not make them interchangeable.
Compare both thread interfaces and obtain the missing dimensional and mounting information for the actual assembly. The reviewed manufacturer material does not establish a universally interchangeable alternative or authorize changing the mounting geometry.
No exact hardware revision, discontinuation date or manufacturer-approved direct successor for 135826-01 was confirmed in the inspected source. The suffix -01 is retained as part of the part number and is not presented as a verified hardware revision.
Features:
- Keep the complete 135826-01 ordering reference
- Do not treat neighboring accessory rows as equivalent replacements
- No verified lifecycle date or direct successor in the reviewed source
The Bently Nevada 135826-01 mechanical thread adaptation for a seismic-transmitter mounting point requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 135826-01 mechanical thread adaptation for a seismic-transmitter mounting point must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 135826-01
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What are the two thread sizes on Bently Nevada 135826-01?
The official Studs and Adapters table identifies 135826-01 as a male-to-male standard stud with 1/4-28 UNF and M10 x 1.0 threads. Both ends are male; it is not a female-thread mounting base. -
Which transmitter documentation lists 135826-01 as an accessory?
Bently Nevada lists it in the 177230 Seismic Transmitter datasheet, document 177232 Rev. T, under Studs and Adapters. That establishes the documented accessory context, not universal compatibility with every Bently Nevada sensor. -
Does this mounting stud require power or carry a vibration output?
It is documented as a mechanical stud. The loop-powered measurement and signal-output functions described in the datasheet belong to the 177230 transmitter, not to part 135826-01. -
Is the M10 connection specified without a thread pitch?
No. The manufacturer explicitly identifies the metric connection as M10 x 1.0. Keep the 1.0 pitch in the installation and purchasing specification rather than identifying the connection only as M10. -
Is 135826-01 one of the adapters stated to be included with every 177230?
The included-adapter list names M6 x 1, M8 x 1.25 and 1/4-28 UNF. The separate accessory table lists the M10 x 1.0 part 135826-01; confirm the actual supply scope rather than assuming this accessory is included. -
Can the transmitter mounting torque be treated as a separate stud torque rating?
The reviewed document gives mounting information for the transmitter, but no independent tightening specification for 135826-01. Obtain the applicable assembly instructions before assigning a torque to either stud interface. -
Can I use the transmitter's dimensions, weight or case material to specify this stud?
No. Those physical data describe the 177230 transmitter. The 135826-01 accessory row only establishes its male-to-male form and two thread specifications; stud dimensions, material and shipping weight require separate confirmation.
READY TO VERIFY YOUR PART?
Get a 135826-01 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
