PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
190501-09-00-04 Low-frequency velocity vibration transducer
Bently Nevada 190501-09-00-04 is a Velomitor CT low-frequency piezo-velocity transducer for casing vibration measurement. It belongs to the 190501 range and is intended for cooling-tower and air-cooled heat-exchanger fan assemblies operating at or above 90 rpm.
The transducer integrates piezoelectric sensing and signal conditioning in a 316L stainless-steel case. It produces a velocity-proportional output with a nominal sensitivity of 3.94 mV/mm/s. This configuration has a 3/8-24 to 1/4-in NPT plate stud, a two-pin MIL-C-5015 interface without an integral cable, and approval option 04.
The transducer integrates piezoelectric sensing and signal conditioning in a 316L stainless-steel case. It produces a velocity-proportional output with a nominal sensitivity of 3.94 mV/mm/s. This configuration has a 3/8-24 to 1/4-in NPT plate stud, a two-pin MIL-C-5015 interface without an integral cable, and approval option 04.
BEFORE YOU BUY
Confirm the complete low-frequency velocity vibration transducer
ACTUAL APPLICATIONS
Application context for 190501-09-00-04
190501-09-00-04 is a Velomitor CT transducer for low-frequency casing vibration measurement on cooling-tower and air-cooled heat-exchanger fans. These duties occur in power generation, oil and gas processing, and paper production. Fan speed must be at least 90 rpm.
-
01 · POWER GENERATION
Electricity Generation and Industrial Energy Production
Thermal Electric Power GenerationCombined Cycle Power Production -
02 · OIL & GAS
Oil Production and Natural Gas Processing
Oil Exploration and ProductionNatural Gas Process Production -
03 · PULP & PAPER
Pulp Processing and Paper Manufacturing Production
Pulp Production Process AutomationPaper and Board Manufacturing
Technical specifications for 190501-09-00-04
-
Product Model190501-09-00-04
-
Product ParametersLow-frequency velocity vibration transducer
-
In stock2 units
-
ManufacturerBently Nevada
-
Mounting stud3/8-24 to 1/4-in NPT plate stud
-
Connection interface2-pin MIL-C-5015; no integral cable
-
Agency approval optionMultiple approvals, code 04
-
Sensitivity3.94 mV/mm/s ±5%
-
Frequency response3 to 900 Hz ±1 dB; 1.5 Hz to 1 kHz ±3 dB
-
Velocity range63.5 mm/s peak
-
Transverse responseLess than 5%
-
Amplitude linearity±2%
-
Mounted resonant frequency9 kHz minimum
-
Output bias voltage10.1 V DC ±1.0 V
-
Output impedanceLess than 400 Ω typical
-
Operating temperature-40 to +85 ℃
-
Storage temperature-40 to +100 ℃
-
Shock limit5000 g peak
-
Mounting torque4.5 N·m ±0.6 N·m
View all additional
Alternative Names
190501-09-00-04
190501 Velomitor CT Low-frequency velocity vibration transducer
Velomitor CT 3/8-24 to 1/4-in NPT plate stud mounting stud
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 190501-09-00-04 low-frequency velocity vibration transducer
Bently Nevada 190501-09-00-04 is a Velomitor CT low-frequency piezo-velocity transducer for casing vibration measurement. It belongs to the 190501 range and is intended for cooling-tower and air-cooled heat-exchanger fan assemblies operating at or above 90 rpm.
Verify the mounting stud (3/8-24 to 1/4-in NPT plate stud), connection interface (2-pin MIL-C-5015; no integral cable) and agency approval option (Multiple approvals, code 04) against the installed configuration. Keep the documented connections and mechanical clearances.
Use the applicable 190501 Velomitor CT instructions to complete mounting and connection. Check the affected vibration or position channel, baseline signal and diagnostic indications before returning the machinery to operation.
Features:
- Mounting stud: 3/8-24 to 1/4-in NPT plate stud
- Connection interface: 2-pin MIL-C-5015; no integral cable
- Agency approval option: Multiple approvals, code 04
The 190501-09-00-04 low-frequency velocity vibration transducer requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 190501-09-00-04 low-frequency velocity vibration transducer
Match the complete 190501-09-00-04 article and its ordered mechanical and connection options before replacement. The mounting stud is 3/8-24 to 1/4-in NPT plate stud, and the connection interface is 2-pin MIL-C-5015; no integral cable; another family member may have different options.
Record the existing low-frequency velocity vibration transducer, routing, mounting position and companion transducer identification before removal. Preserve the channel settings and reference measurements, and follow the machine isolation procedure.
After fitting 190501-09-00-04, restore the documented mounting and connection arrangement. Check the relevant channel response, baseline and alarm configuration, then retain the final inspection and functional-test record.
Features:
- Mounting stud: 3/8-24 to 1/4-in NPT plate stud
- Connection interface: 2-pin MIL-C-5015; no integral cable
- Agency approval option: Multiple approvals, code 04
The 190501-09-00-04 low-frequency velocity vibration transducer requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 190501-09-00-04 low-frequency velocity vibration transducer must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size9.2 × 3.6 × 3 cm
-
Shipping weight0.30kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 190501-09-00-04
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which plate stud fits the cooling-tower mounting point?
Mounting stud is 3/8-24 to 1/4-in NPT plate stud. -
How is the external sensor cable connected?
Connection interface is 2-pin MIL-C-5015; no integral cable. -
What low-frequency response suits slow fan rotation?
Frequency response is 3 to 900 Hz ±1 dB; 1.5 Hz to 1 kHz ±3 dB. -
Which velocity sensitivity should the monitor use?
Sensitivity is 3.94 mV/mm/s ±5%. -
What bias voltage supports a channel health check?
Output bias voltage is 10.1 V DC ±1.0 V. -
What mounting torque is specified for the stud?
Mounting torque is 4.5 N·m ±0.6 N·m. -
Which fan speed and approval code belong in the purchase request?
State the complete article code, fan speed, plate-stud mounting and approval option 04. The intended fan assembly must operate at or above 90 rpm. -
What should receiving inspection verify on the Velomitor CT?
Compare the complete label and physical options with the purchase order: Connection interface: 2-pin MIL-C-5015; no integral cable; Agency approval option: Multiple approvals, code 04; Sensitivity: 3.94 mV/mm/s ±5%; Frequency response: 3 to 900 Hz ±1 dB; 1.5 Hz to 1 kHz ±3 dB.
READY TO VERIFY YOUR PART?
Get a 190501-09-00-04 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
190501-09-00-04Low-frequency velocity vibration transducerManufacturer: Bently NevadaView Details
-
-
-
-
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
