AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
Require for Quote:
Need more help? You may also find the answer in our FAQ section
Warranty Policy
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
Return Notice
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
How to order?
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Parts Availability
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 200150-14-05
-
Product Model200150-14-05
-
Product ParametersAccelerometers
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
Estimated Shipping Size30.5x8.5x8.5cm
-
ManufacturerBently Nevada
-
Weight0.6 kg
-
Mounted Resonant Frequency>20 kHz
-
Amplitude Linearity±2%
-
Transverse Sensitivity≤7%
-
Quiescent Current<800 µA
-
Output Bias Voltage+2.5 ± 0.23 Vdc
-
Temperature Range-55 ºC to +121 ºC (-67 ºF to +250ºF)
Description
General Purpose Trendmaster 2000 or
Trendmaster Pro Accelerometer
14 3/8-24 to 3/8-24 UNF, 3/4 inch hex stud
05 Multiple Approvals (CSA, ATEX,and IECEx)
Trendmaster Pro Accelerometer
14 3/8-24 to 3/8-24 UNF, 3/4 inch hex stud
05 Multiple Approvals (CSA, ATEX,and IECEx)
Information
Overview
Manuals
Technical notes
Product Applications
Cable Management & Hazardous Area Seals
Features:
- StandardAccelerationto-Velocitychannel type
- 316L stainless steel
- General Purpose Trendmaster 2000 orTrendmaster Pro Accelerometer
The 20015x Accelerometers feature a hermetically sealed,stainless steel case. This design provides an extremelyrugged transducer that is well suited for harsh industrialenvironments. The transducer’s top-mounted, 5-pinconnector allows you to easily install and remove theinterconnecting signal cable. A 3/8-24 threaded hole on thebottom of the sensor’s casing accommodates severalmounting options.
The 200150-14-05 Bently Nevada Accelerometers may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 200150-14-05 Accelerometers Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 20015x Accelerometers feature a hermetically sealed,stainless steel case. This design provides an extremelyrugged transducer that is well suited for harsh industrialenvironments. The transducer’s top-mounted, 5-pinconnector allows you to easily install and remove theinterconnecting signal cable. A 3/8-24 threaded hole on thebottom of the sensor’s casing accommodates severalmounting options.The 20015x Accelerometers contain a piezoelectric sensingdevice that generates a charge when it is subjected tovibration. The accelerometers electronically convert thischarge to a differential voltage signal that is proportional tothe acceleration that is parallel to the sensitive axis of thetransducer.
- Crude Distillation Units:Seismic casing vibration: crude & bottom pumps
- Hydrotreating & Cracking Sections:H2 compressors & chemical injection skid pumps
- Tank Farms & Transfer Stations:Transfer pumps & blenders: prevents seal failures
- Boiler Infrastructure:Boiler feed pumps & forced-draft combustion fans
- Cooling & Condensation Loops:Circulating water pumps & cooling tower motors
- Water Treatment Demin Skids:Multi-stage filtration pumps for ultra-pure water
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Moisture Protection: For humid or outdoor washdown factory fields, pack the internal pins with DC4 Electrical Insulating Compound before attaching the coupling nut.
Minimum Bend Radius: Maintain a minimum bend radius of 63.5 mm (2.5 inches) for 200151 cables, and 73.7 mm (2.9 inches) for 200152 cables.
Conduit Runs: Secure the cable back to the local proTIM processing node using flexible armor or conduit to prevent whipping and dynamic cable strain.
FAQs
-
What is the 200150-14-05？
+The Bently Nevada 200150-14-05 is a general-purpose, industrial piezoelectric accelerometer primarily designed for the Trendmaster 2000 system. -
What systems are compatible with the 200150-14-05?
+The sensor is designed to interface with the Trendmaster 2000 system, 200100 Dual Acceleration to Velocity flexiTIM modules, 89130-01 Transducer Interface Modules (TIM), and the 1900/25 and 1900/27 monitors. -
Can the 200150 and 200155 sensors be used interchangeably?
+No, they should not be swapped. The 200155 sensor is designed for low-frequency applications (below 10 Hz) and uses a wider frequency range, which can lead to increased electrical noise and faulty readings if used in 200150 applications. -
What type of cabling is required?
+It uses a specialized 4-conductor, 22 AWG shielded cable with a molded, top-mounted 5-pin 1/2-20 UNF connector. This design provides an IP67-rated seal to protect against liquid ingress.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN