AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Ships by Sunday, July 19
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 200150-09-05
-
Product Model200150-09-05
-
Product ParametersGeneral Purpose Trendmaster 2000 orTrendmaster Pro Accelerometer
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size4x3.4x6.2cm
-
ManufacturerBently Nevada
-
Weight0.1 kg
-
Mounting Stud Option3/8-24 to 3/4 NPT, 1-1/4 inch hexstud
-
Approvals MultipleApprovals (CSA, ATEX,and IECEx)
-
Used withProTIM OptionStandardAccelerationto-Velocitychannel type(-01)
-
Type ofApplicationGeneral application
-
Sensitivity @ 80Hz (± 12%)10.2 mV/(m/s2) (100 mV/g)
-
Frequency Range in Hz10 to 1000 (600 to 60,000)
-
ResonantFrequency>20 kHz
Description
The Bently Nevada 200150-09-05 is a general purpose, wide frequency, case-mounted seismic transducer for use with Trendmaster 2000 and Trendmaster Pro systems. The 200150-09-05 interfaces with the 200100 Dual Acceleration to Velocity flexiTIM Module, the 89130-01 Acceleration-to-Velocity TIM (Transducer Interface Module), as well as the 1900/25 and 1900/27 monitors,
providing reliable vibration monitoring for rotating machinery.
The 200150-09-05 features a hermetically sealed, stainless steel case that provides an extremely rugged transducer well suited for harsh industrial environments. This sealed construction of the 200150-09-05 ensures protection against moisture, dust, and corrosive contaminants, maintaining reliable performance in demanding process plant conditions.
The 200150-09-05 contains a piezoelectric sensing device that generates a charge when it is subjected to vibration. The 200150-09-05 electronically converts this charge to a differential voltage signal that is proportional to the acceleration that is parallel to the sensitive axis of the transducer. The 200150-09-05 delivers a sensitivity of 100 mV/g (10.2 mV/m/s²) with an acceleration range of ±80 g (±784 m/s²) peak, ensuring accurate capture of vibration amplitudes across typical industrial machinery operating conditions.
providing reliable vibration monitoring for rotating machinery.
The 200150-09-05 features a hermetically sealed, stainless steel case that provides an extremely rugged transducer well suited for harsh industrial environments. This sealed construction of the 200150-09-05 ensures protection against moisture, dust, and corrosive contaminants, maintaining reliable performance in demanding process plant conditions.
The 200150-09-05 contains a piezoelectric sensing device that generates a charge when it is subjected to vibration. The 200150-09-05 electronically converts this charge to a differential voltage signal that is proportional to the acceleration that is parallel to the sensitive axis of the transducer. The 200150-09-05 delivers a sensitivity of 100 mV/g (10.2 mV/m/s²) with an acceleration range of ±80 g (±784 m/s²) peak, ensuring accurate capture of vibration amplitudes across typical industrial machinery operating conditions.
Alternative Names
200150-09-O5
200150-O9-05
20015O-09-05
200I50-09-05
2OO150-09-05
200150 09 05
200150 09 O5
200150 O9 05
20015O 09 05
200I50 09 05
2OO150 09 05
200150-09-00
200150-09-CN
Information
Overview
Manuals
Application Notes
Product Applications
Physical Insertion & Mounting
Features:
- General Purpose Wide-Frequency Case-Mounted Seismic Transducer
- Hermetically Sealed Stainless Steel Case for Harsh Environments
- Piezoelectric Sensing Element with Differential Voltage Output
- Top-Mounted 5-Pin Connector for Easy Cable Installation
The 200150-09-05 features a hermetically sealed stainless steel case that provides an extremely rugged transducer well suited for harsh industrial environments. The top-mounted 5-pin connector on the 200150-09-05 allows easy installation and removal of the interconnecting signal cable. The bottom of the sensor casing on the 200150-09-05 has a 3/8-24 threaded hole that accommodates the included 3/8-24 to 3/4 NPT hex stud mounting hardware.
The 200150-09-05 Bently Nevada General Purpose Trendmaster 2000 orTrendmaster Pro Accelerometer may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 200150-09-05 General Purpose Trendmaster 2000 orTrendmaster Pro Accelerometer Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Power requirements for the 200150-09-05 are 4.7 to 5.5 VDC excitation with a quiescent current of less than 800 µA. The output bias voltage of the 200150-09-05 is +2.5 ±0.23 VDC. The broadband electrical noise is 350 µg over the 1 Hz to 15 kHz band. The settling time of the 200150-09-05 is 3 seconds to within 5% of bias. Electrical isolation is rated at 600 Vrms.
The 200150-09-05 carries multiple hazardous area approvals including CSA, ATEX, and IECEx. The 200150-09-05 is approved for Class I, Division 1 Groups A,B,C,D T4 and Class I, Zone 0/1 Ex ia IIC T4 installations. The 200150-09-05 may be installed in a Class I, Zone 0 application without a barrier when used with the appropriate Trendmaster Pro TIM.
The 200150-09-05 operates over a temperature range of –40°C to +80°C. The maximum recommended cable length for the 200150-09-05 is 305 meters (1,000 feet). The 200150-09-05 is intended for general-purpose case-mounted vibration monitoring where standard acceleration-to-velocity conversion is required.
- Oil & Gas: Monitors compressors, pumps, and gas turbines
- Power Generation: Tracks vibration in steam and hydroelectric turbines
- Industrial Manufacturing: Protects rotating equipment in paper, mining, and water treatment
- Radial Vibration: Monitors bearings, detects rotor imbalance or shaft misalignment
- Axial Thrust: Measures rotor displacement to determine thrust bearing wear
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Prepare the Surface: Ensure the mounting location is flat, clean, and free of paint, rust, or debris.
Mounting Stud Integration: The sensor base features a 3/8-24 female thread. Insert the included 1-3/8 inch hex plate stud (which adapts the 3/8-24 thread down to a 1/4-28 UNF thread) tightly into the machine.
Torque Specifications: Tighten the accelerometer housing onto the mounting stud using a torque wrench. The designated torque specification is 2.7 to 6.8 N·m (2 to 5 ft·lbf).
Do not overtighten, as this can damage the internal crystal or warp the stainless steel housing.
Technical notes
The 200150-09-05 operates over a temperature range of -54°C to +121°C (-65°F to +250°F), ensuring reliable performance in extreme thermal environments. The 200150-09-05 carries comprehensive hazardous area certifications including cNRTLus, ATEX, and IECEx approvals, allowing installation in Class I, Zone 0 applications without a barrier when used with compatible Bently Nevada interface modules. The 200150-09-05 complies with FCC rules, EMC Directive 2014/30/EU, and RoHS Directive 2011/65/EU.
FAQs
-
What is the 200150-09-05?
+The Bently Nevada 200150-09-05 is a specialized Trendmaster Pro Accelerometer designed for monitoring lower-frequency, structural, and heavy industrial machinery. -
What equipment is this sensor typically used to monitor?
+It is engineered for industrial assets such as power turbines, large crushers, oil pumps, and general factory machinery. It tracks vibrations caused by equipment unbalance or misalignment. -
How does the output differ from standard accelerometers?
+Unlike typical single-ended IEPE (ICP) accelerometers that use a constant current source, the Bently Nevada 200150 series uses a differential voltage output.. -
What frequency response range does it cover?
+It operates effectively across a standard frequency response of 10 Hz to 1000 Hz (600 to 60,000 cpm).
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
-
-
-
-
-
-
200150-22-CNGeneral Purpose Trendmaster 2000 orTrendmaster Pro AccelerometerManufacturer: Bently NevadaView Details
-
-
-
200150-09-05General Purpose Trendmaster 2000 orTrendmaster Pro AccelerometerManufacturer: Bently NevadaView Details
Product
Product Browsing History
-
200150-09-05General Purpose Trendmaster 2000 orTrendmaster Pro AccelerometerManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN