AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 7200 Proximity Transducer Systems
- 21504-000-020-10-02
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 21504-000-020-10-02
-
Product Model21504-000-020-10-02
-
Product Parameters5 mm and 8mm Standard Mount Probe
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
Estimated Shipping Size1.5x1.3x119cm
-
ManufacturerBently Nevada
-
Weight0.05 kg
-
Unthreaded Length Option0.0 inches
-
Engish thread configurations2.0 inches
-
Total Length Option0.5 metre (20inches)
-
Connector OptionWith miniature male coaxial conncctor
-
DLAMETER8MM
-
CONFIGURATIONStandard 3/8-24
Description
Minimum unthreaded length:0.0 inches
Minimum case length:2.0 inches
05 0.5 metre (20inches)
02 With miniature male coaxial conncctor
Minimum case length:2.0 inches
05 0.5 metre (20inches)
02 With miniature male coaxial conncctor
Information
Overview
Manuals
Technical notes
Product Applications
Core Instructions & Installation
Features:
- Frequency Response: 0 Hz (DC) to 10 kHz
- Noncontacting
- Gap-to-Voltage Transducer Systems
- Measures Static and Dynamic Distances
The Bently Nevada 7200 5mm / 8mm Series Proximity Transducer Systems are noncontacting, gap-to-voltage transducer systems that measure static as well as dynamic distances between the probe tip and the observed target. The general application in any requirement for an accurate, noncontacting displacement measurement. However, the most common use is for shaft position and vibration measurements on rotating and reciprocation machinery. They are designed for use with virtually any machine type including gas and steam turbines, compressors, pumps, centrifuges, electric motors and generators. The system offer 80 mils (2mm) of linear measuring range and are compatible with API 670 requirements.
The 21504-000-020-10-02 Bently Nevada 5mm and 8mm Standard Mount Probe may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 21504-000-020-10-02 5mm and 8mm Standard Mount Probe Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 7200 5 mm and 8mm Proximity Transducer Systems are noncontacting, gap-to-voltage transducer systems that measure static as well as dynamic dis-tances between the probe tip and the observed target. The general application is any requirement for an accurate, non-contacting displacement mcasuremcnt. However, the most common use is for shaft position and vibration measure-ments on rotating and reciprocating machinery. They are designed for usc with virtually any machine type includ. ing gas and steam turbines, compressors,pumps, centrifuges, electric motors and generators. The systems offer 80 mils (2 mm) of lincar mcasuring range and are compatible with API 670 requirements.
- Radial Vibration Monitoring:Measures shaft vibration in turbines & pumps to detect imbalance/misalignment
- Axial (Thrust) Position Measurement:Monitors axial shaft position to prevent thrust bearing failure
- Speed/Keyphasor Measurements:Measures speed & phase reference signals on key machinery
- Industrial Automation:Reliable non-contact sensors for harsh environments
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Mounting: The probe is typically radially mounted to measure shaft displacement, vibration, or Keyphasor signals. Ensure the mounting surface is clean before installation.
Gapping: Proper "gapping" is critical for accurate readings. For Bently Nevada proximity probes, the normal gap voltage range is typically −9 V to −11 V DC when the shaft is centered in the probe's linear range.
System Components: This probe is part of a system that includes a Proximitor sensor and an extension cable. Ensure all components are compatible and the total length of the probe and extension cable matches the Proximitor's calibration (typically 5 or 9 meters).
FAQs
-
What is the function of the 21504-000-020-10-02?
+It detects shaft displacement, vibration, and radial position, allowing for monitoring of rotor stability and potential bearing failure. -
What systems is it compatible with?
+This probe is part of the 7200 series, typically compatible with older Bently Nevada 3300 and 9000 Monitoring Systems -
What are the main specifications of 21504-000-020-10-02?
+It is typically a 1-meter (1M) long probe with an integrated coaxial cable. -
Does the probe require special care during installation?
+Yes, the probe must be installed with specific gap distances, often requiring calibration to a voltage setting for linear operation. -
What is the linear measuring range?
+The system typically complies with API 670 specifications, offering a linear range of 80 mils (2.0 mm).
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN