AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 7200 Proximity Transducer Systems
- 21504-000-032-10-02
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 21504-000-032-10-02
-
Product Model21504-000-032-10-02
-
Product Parameters5mm and 8mm Standard Mount Probe
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
Estimated Shipping Size1.5x1.3x119cm
-
ManufacturerBently Nevada
-
Weight0.05 kg
-
Unthreaded Length Option0.0 inches
-
Engish thread configurations2.0 inches
-
Total Length Option0.5 metre (20inches)
-
Connector OptionWith miniature male coaxial conncctor
-
DLAMETER8MM
-
CONFIGURATIONStandard 3/8-24
Description
Minimum Unthreaded Length: 0.0 inch
Minimum Housing Length: 3.2 inch
10 1.0metre (39 inches)
02 With Miniature Male Coaxial Connector
Minimum Housing Length: 3.2 inch
10 1.0metre (39 inches)
02 With Miniature Male Coaxial Connector
Information
Overview
Manuals
Technical notes
Product Applications
Setting the Gap
Features:
- Frequency Response: 0 Hz (DC) to 10 kHz
- Noncontacting
- Gap-to-Voltage Transducer Systems
- Measures Static and Dynamic Distances
The Bently Nevada 7200 5mm / 8mm Series Proximity Transducer Systems are noncontacting, gap-to-voltage transducer systems that measure static as well as dynamic distances between the probe tip and the observed target. The general application in any requirement for an accurate, noncontacting displacement measurement. However, the most common use is for shaft position and vibration measurements on rotating and reciprocation machinery. They are designed for use with virtually any machine type including gas and steam turbines, compressors, pumps, centrifuges, electric motors and generators. The system offer 80 mils (2mm) of linear measuring range and are compatible with API 670 requirements.
The 21504-000-032-10-02 Bently Nevada 5mm and 8mm Standard Mount Probe may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 21504-000-032-10-02 5mm and 8mm Standard Mount Probe Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
This new technique of sccuring the coaxial cable to the probe tip provides the strongest junction yet offered by Bently Nevada and increases the durability of the probe during installation and usage.
Two new cable length options are now available on 8 mm probes. They are 5 metres and 9 metres of integral cable. Since the entire lead-length is built into the probe, an extension cable is not used with these length options. Ninc probe configurations are available to accommodate English and metric thread requirements.The 5 mm probes are constructed of fiberglass. The 8 mm probes are constructed of polyphenylene sulfide, (PPS), a high performance plastic capable of withstanding unusually harsh, wet and/or chemical cnvironments. Both transducers are suitable for usc in a confined space and offer 80 mils (2 mm) of linear range with a scale factor of 200 mV/mil(8 V/mm).
- Radial Vibration Monitoring:Measures shaft vibration in turbines & pumps to detect imbalance/misalignment
- Axial (Thrust) Position Measurement:Monitors axial shaft position to prevent thrust bearing failure
- Speed/Keyphasor Measurements:Measures speed & phase reference signals on key machinery
- Industrial Automation:Reliable non-contact sensors for harsh environments
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Connect the probe to a Proximitor sensor and monitoring system.
Slowly thread the probe toward the target surface while monitoring the DC gap voltage.
For the 7200/3300 series, the standard "zero" or center-gap voltage is typically between −9 V and −11 V DC.
Once the desired voltage is reached, secure the probe with a locknut to prevent it from moving due to machinery vibration.
Use the miniature male coaxial connector (Option -02) to attach the probe to an extension cable.
Ensure all connections are tight and clean. For field wiring to the monitor, use three-conductor shielded triad cable.
FAQs
-
What is 21504-000-032-10-02?
+The Bently Nevada 21504-000-032-10-02 is an 8mm standard mount proximity probe from the 7200 series used for non-contact vibration and position measurement on rotating machinery. -
What is the function of the 21504-000-032-10-02 probe?
+It is part of a non-contact gap voltage proximity sensor system used to measure the static or dynamic distance between the probe tip and a target -
What is the 21504-000-032-10-02 typical gap voltage?
+For Bently Nevada proximity systems, the normal gap voltage typically ranges from -9 V to -11 V DC when the probe is properly gapped and centered in its linear range. -
What are the environmental limits?
+The storage temperature for these probes generally ranges from -51°C to +177°C (-60°F to +351°F).
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN