AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Ships by Tuesday, July 28
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 200151-60-03-00
-
Product Model200151-60-03-00
-
Product ParametersAccelerometer Interface Standard Cable,Connectors on Both Ends
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size4x3.4x6.2cm
-
ManufacturerBently Nevada
-
Weight0.1 kg
-
Cable Length6.0 meters
-
Armor OptionBlue cable with armor
-
Coupling NutStandard coupling nut
-
Cable Construction4-Conductor, 22 AWG
-
Shield CoverageMinimum 85%
Description
The 200151-60-03-00 is a Bently Nevada Accelerometer Interface Standard Cable with connectors on both ends. The 200151-60-03-00 is designed for connecting accelerometers such as the 200150, 200155, and 200157 series to monitoring systems including the Trendmaster ProTIMs and Trendmaster 2000 system.
The 200151-60-03-00 features a cable length of 6.0 meters (19.7 feet), as indicated by the "-60" option in the part number. The 200151-60-03-00 comes with blue cable and protective armor, as specified by the "-03" armor option. The 200151-60-03-00 is equipped with a standard coupling nut, as indicated by the "-00" coupling nut option.
The 200151-60-03-00 is constructed with 4-conductor, 22 AWG wire with braided shield and drain wire (85% coverage minimum), and PVC outer jacket. The 200151-60-03-00 features nickel-plated coupling nuts for corrosion resistance and reliable connections. The seal connectors on the 200151-60-03-00 provide an IP67 seal to transducers and mating hardware, with connectors molded to the cable.
The 200151-60-03-00 features a cable length of 6.0 meters (19.7 feet), as indicated by the "-60" option in the part number. The 200151-60-03-00 comes with blue cable and protective armor, as specified by the "-03" armor option. The 200151-60-03-00 is equipped with a standard coupling nut, as indicated by the "-00" coupling nut option.
The 200151-60-03-00 is constructed with 4-conductor, 22 AWG wire with braided shield and drain wire (85% coverage minimum), and PVC outer jacket. The 200151-60-03-00 features nickel-plated coupling nuts for corrosion resistance and reliable connections. The seal connectors on the 200151-60-03-00 provide an IP67 seal to transducers and mating hardware, with connectors molded to the cable.
Information
Overview
Manuals
Application Notes
Product Applications
Electrical and Signal Connection
Features:
- Accelerometer Interface Standard Cable with Connectors on Both Ends
- 6.0 Meter Cable Length
- Blue Cable with Armor Protection
- Standard Coupling Nut
- 4-Conductor 22 AWG Construction with Braided Shield
The 200151-60-03-00 is constructed with 4-conductor, 22 AWG wire with braided shield and drain wire (85% coverage minimum), and PVC outer jacket. The 200151-60-03-00 features nickel-plated coupling nuts for corrosion resistance and reliable connections. The seal connectors on the 200151-60-03-00 provide an IP67 seal to transducers and mating hardware, with connectors molded to the cable.
The 200151-60-03-00 BENTLY NEVADA Accelerometer Interface Standard Cable,Connectors on Both Ends may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
BENTLY NEVADA 200151-60-03-00 Accelerometer Interface Standard Cable,Connectors on Both Ends Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 200151-60-03-00 uses a 4-conductor cable construction with a braided shield and drain wire. The shield provides protection against electrical interference that could affect low-level accelerometer signals. The armored outer construction provides additional mechanical protection for industrial installations where the cable may be exposed to vibration, abrasion, or other physical stresses.
The cable is for use with compatible Bently Nevada 200150, 200155, and 200157 accelerometers. These accelerometers are used in Trendmaster and other compatible vibration monitoring applications. The cable therefore serves as an important connection component for transmitting accelerometer signals within industrial machinery condition-monitoring systems.
The sealed connector design provides additional protection against environmental exposure. The specified minimum bend radius is 63.5 mm (2.5 in), and the cable should be routed without excessive bending, pulling, twisting, or mechanical stress to maintain signal integrity and prevent damage to the cable assembly.
- Oil & Gas: Monitors vibration on compressors, pumps, and turbines
- Power Generation: Tracks seismic casing vibration on high-speed rotating equipment and fans
- Petrochemical/Chemical: Continuous monitoring in hazardous/corrosive environments with agency approvals
- Pulp/Paper/Water: General health assessments for gearboxes, pumps, and motors
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Environmental Sealing: The molded ends provide an IP67-rated moisture seal. They feature factory-applied DC4 electrical insulating compound inside the sockets to block out humidity during sudden temperature drops.
Transducer Side: Thread the coupling nut firmly onto the accelerometer housing. Tighten by hand or to manufacturer torque specs to ensure the IP67 seal engages completely.
Interface Side: Connect the opposite end directly into compatible hardware like a proTIM-C, a flexiTIM, or conduit/housing cable adapters.
Shielding: The cable features an internal braided shield (minimum 85% coverage) with a dedicated drain wire to ground out electromagnetic interference (EMI).
Alternative Names
200151-60-03-OO
200151-60-O3-00
200151-6O-03-00
20015I-60-03-00
200I51-60-03-OO
2OO151-60-03-OO
Z00151-60-03-OO
200151 60 03 OO
200151 60 O3 OO
200151 6O 03 OO
20015I 60 03 OO
200I51 60 03 OO
2OO151 60 03 OO
200151-60-03-CN
Technical notes
The 200151-60-03-00 has an operating temperature range of -20°C to +100°C (-4°F to +212°F). The 200151-60-03-00 may be used at lower temperatures if the cable is not allowed to move or flex, as flexing these cables at temperatures below -20°C (-4°F) may damage the cables.
FAQs
-
What sensors are compatible with this cable?
+The 200151 cable is primarily designed to integrate with Bently Nevada 200150, 200155, and 200157 series accelerometers -
What is the minimum bend radius of the cable?
+The minimum recommended bend radius is 63.5 mm (2.5 inches). Bending the cable past this limit or below -20° C can cause permanent internal damage. -
Does the connector require any special maintenance?
+Yes. To ensure moisture does not compromise the connection, connectors are often molded with protective seals and can be treated with a product like DC4 electrical insulating compound. Inspect your connections periodically for signs of wear in harsh oil, gas, or industrial environments. -
How is the cable constructed to handle interference?
+The cable contains a 4-conductor, 22 AWG wire core wrapped in a braided copper shield with minimum 85% coverage. This design offers heavy-duty protection against Electromagnetic Interference (EMI) in noisy industrial settings
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
-
-
-
-
-
-
-
-
200151-60-03-10Accelerometer Interface Standard Cable,Connectors on Both EndsManufacturer: Bently NevadaView Details
-
200151-60-03-00Accelerometer Interface Standard Cable,Connectors on Both EndsManufacturer: Bently NevadaView Details
Product
Product Browsing History
-
200151-60-03-00Accelerometer Interface Standard Cable,Connectors on Both EndsManufacturer: Bently NevadaView Details
-
200151-20-03-00Accelerometer Interface Standard Cable,Connectors on Both EndsManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
