AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
Require for Quote:
Need more help? You may also find the answer in our FAQ section
Warranty Policy
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
Return Notice
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
How to order?
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Parts Availability
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 200152-15-10
-
Product Model200152-15-10
-
Product ParametersAccelerometer Interface Standard Cable
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
Estimated Shipping Size10x4x4cm
-
ManufacturerBently Nevada
-
Weight0.4 kg
-
Cable Length15 meters
-
Coupling NutEnhanced coupling nut
-
Sensitivity10.2 mV/(m/s2) (100 mV/g)
-
Excitation Voltage4.7 to 5.5 Vdc
-
Output Bias Voltage+2.5 ± 0.23 Vdc
Description
15 15 meters
10 Enhanced coupling nut
Accelerometer Interface Standard Cable
Connector on Accelerometer End Only
10 Enhanced coupling nut
Accelerometer Interface Standard Cable
Connector on Accelerometer End Only
Information
Overview
Manuals
Technical notes
Product Applications
Cable Routing and Bend Radius
Features:
- Single-End Connector Design
- Extended 15-Meter Cable Length
- Standard Coupling Nut Configuration
- 4-Conductor Shielded Construction with FEP Insulation
- Wide Temperature Operating Range
- Multiple Length Options Available
The 200152-15-10 ordering code decodes as follows: 200152 designates the accelerometer interface standard cable family with connector on accelerometer end only; 15 specifies a 15-meter (49.2-foot) overall cable length; 10 indicates a standard coupling nut configuration. This 15-meter length is specifically designed for installations in large-frame rotating machinery—such as gas turbines, steam turbines, centrifugal compressors, and motor-generator sets—where the bearing housing and control cabinet are separated by considerable distance.
The 200152-15-10 Bently Nevada Accelerometer Interface Standard Cable may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 200152-15-10 Accelerometer Interface Standard Cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The cable features a 4-conductor (22 AWG) construction with dual-layer shielding for maximum electromagnetic compatibility. The inner shield consists of 100% aluminum Mylar® foil with helically applied drain wire, while the outer shield comprises 85% braided tinned copper. This dual-shield architecture provides exceptional immunity to electromagnetic interference (EMI) and radio-frequency interference (RFI) in high-noise industrial environments near generators, variable-frequency drives, and power distribution equipment. Conductor insulation is Fluorinated Ethylene Propylene (FEP) Teflon® at 0.25 mm thickness, offering superior chemical resistance to lubricating oils, hydraulic fluids, and hydrocarbon vapors while maintaining dielectric stability across the operating temperature range.
- Oil, Gas & Petrochemical:Vibration on pumps, compressors & liquid handling
- Power Generation:Casing acceleration on turbines, generators & fans
- Chemical Processing:Mixers, centrifuges & production blowers failure prevention
- Mining & Mineral Processing:Predictive maintenance for crushers, conveyors & mills
- Steel and Metal Smelting Mills:Furnace exhaust & combustion blowers in extreme heat
- Pulp, Paper, and Timber Mills:Drying rollers, kiln exhaust & boiler systems
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Observe Minimum Bend Radius: Never bend the cable tighter than its rated limit. The 200152 standard PVC cable requires a minimum bend radius of 73.7 mm (2.9 inches). Tighter bends will degrade the shielding or snap internal conductors.
Avoid Cold Flexing: Ensure the ambient environment is above –20 ºC (-4 ºF) if the cable is prone to moving or flexing. The PVC outer jacket becomes brittle below this threshold; flexing it in extreme cold will crack the casing. Static (non-moving) installations are rated down to -55 ºC (-67 ºF).
FAQs
-
What is this 200152-15-10?
+The Bently Nevada 200152-15-10 is an Accelerometer Standard Cable used to connect Bently Nevada vibration sensors to monitoring systems -
Can I use this accelerometer cable outdoors?
+Yes. The cable and associated sensor can endure exposed outdoor industrial environments, provided the exposed cable is protected from direct, long-term UV degradation. -
Does the cable require special crimping tools for installation?
+No. The cable comes pre-terminated with a connector on the accelerometer end and bare leads on the monitor end, requiring only standard wrenches for tightening the coupling nut. -
What do the suffix digits (-15-10) mean exactly?
+The 15 stands for the cable length in meters. The 10 represents the specific standard hardware and coupling nut configuration required for the connection. -
Which accelerometers work with this cable?
+This cable interfaces with the 20015x Family of Accelerometers (including the 200150, 200155, and 200157 models). These sensors feature a top-mounted, 5-pin terminal connection that matches this cable assembly.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN