PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Accelerometer signal interface cable
Bently Nevada 200152-15-00 is an accelerometer interface cable. The interface cable connects a compatible Trendmaster accelerometer to its receiving equipment. This version has a connector at the accelerometer end only, with shielded conductors for the signal connection. It is a cable assembly and does not perform acceleration-to-velocity conversion itself.
Match the complete cable length and coupling-nut option to the installed accelerometer and termination arrangement. The 200152 family differs from the 200151 connector-at-both-ends design. Unidentified modifications must be checked against controlled documentation before the cable is substituted or field-terminated.
Match the complete cable length and coupling-nut option to the installed accelerometer and termination arrangement. The 200152 family differs from the 200151 connector-at-both-ends design. Unidentified modifications must be checked against controlled documentation before the cable is substituted or field-terminated.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 200152-15-00 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · PULP & PAPER
Pulp Manufacturing and Paper Production
Pulp refiners and process pumps in integrated pulp mills.Paper machine press rolls and winders in papermaking facilities. -
02 · WATER & WASTEWATER
Municipal Wastewater Collection and Treatment
Sewage lift pumps serving municipal wastewater collection and treatment.Aeration blowers and sludge equipment in wastewater treatment plants. -
03 · POWER GENERATION
Electricity Generation and Power Plant Utilities
Gas and steam turbine generators in thermal power plants.Hydroelectric turbines and generators in conventional hydropower generating stations.
Technical specifications for 200152-15-00
-
Product Model200152-15-00
-
Product ParametersAccelerometer signal interface cable
-
In stock5 units
-
ManufacturerBently Nevada
-
Cable length15 m
-
Coupling nutStandard coupling nut
-
Connector arrangementConnector on accelerometer end only
-
Conductor constructionFour conductors, 22 AWG
-
Screen constructionBraided shield and drain wire
-
Shield coverage85% minimum
-
Outer jacketPVC
-
Coupling finishNickel plated
-
Minimum bend radius73.7 mm
-
Operating temperature-20 to +100 deg C
-
Mated connector protectionIP67 seal to transducer and mating hardware
View all additional
Alternative Names
200152 15 00
200152-15-00 accelerometer interface cable
Bently Nevada 200152-15-00
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
ACCELEROMETER SIGNAL INTERFACE CABLE
Integrating 200152-15-00
The interface cable connects a compatible Trendmaster accelerometer to its receiving equipment. This version has a connector at the accelerometer end only, with shielded conductors for the signal connection. It is a cable assembly and does not perform acceleration-to-velocity conversion itself.
The datasheet identifies 200152 as an interface cable for the 20015x accelerometers. The 200155 permits a maximum cable length of 15.24 m; a longer standard cable is not automatically compatible with that sensor. Follow the selected receiving-channel wiring diagram.
Respect the 73.7 mm minimum bend radius. Do not flex or bend the cable below -20 deg C; the manufacturer warns this can damage it. Properly mated molded connectors provide the documented seal, with the manufacturer-specified compound available for added moisture protection.
Features:
- Match exact sensor variant, interface-channel type, cable length and mounting arrangement
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 200152-15-00 accelerometer interface cable requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 200152-15-00 requires comparing exact sensor variant, interface-channel type, cable length and mounting arrangement. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
The datasheet identifies 200152 as an interface cable for the 20015x accelerometers. The 200155 permits a maximum cable length of 15.24 m; a longer standard cable is not automatically compatible with that sensor. Follow the selected receiving-channel wiring diagram.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 200152-15-00 accelerometer interface cable requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 200152-15-00 accelerometer interface cable must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size8.8x3.5x7cm
-
Shipping weight0.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 200152-15-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What type of product is 200152-15-00?
200152-15-00 is a accelerometer interface cable. Match the complete cable length and coupling-nut option to the installed accelerometer and termination arrangement. The 200152 family differs from the 200151 connector-at-both-ends design. Unidentified modifications must be checked against controlled documentation before the cable is substituted or field-terminated. -
What is the function of this component?
The interface cable connects a compatible Trendmaster accelerometer to its receiving equipment. This version has a connector at the accelerometer end only, with shielded conductors for the signal connection. It is a cable assembly and does not perform acceleration-to-velocity conversion itself. -
What must be checked for system compatibility?
The datasheet identifies 200152 as an interface cable for the 20015x accelerometers. The 200155 permits a maximum cable length of 15.24 m; a longer standard cable is not automatically compatible with that sensor. Follow the selected receiving-channel wiring diagram. -
Which monitoring application is documented?
The manufacturer warns that substituting 200155 or 200157 for 200150 without matching the interface can produce faulty readings. Verify the full sensor, cable and input-channel arrangement during maintenance. -
What installation precautions apply?
Respect the 73.7 mm minimum bend radius. Do not flex or bend the cable below -20 deg C; the manufacturer warns this can damage it. Properly mated molded connectors provide the documented seal, with the manufacturer-specified compound available for added moisture protection. -
Is 200152 the connector-at-both-ends version?
No. 200152 has the connector at the accelerometer end only. The manufacturer lists 200151 separately for connectors at both ends. -
Can a 25 m cable be used with a 200155 sensor?
Not under the published standard limit. The manufacturer limits cable length with 200155 to 15.24 m; confirm a shorter appropriate cable and the full input configuration.
READY TO VERIFY YOUR PART?
Get a 200152-15-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
