PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Armored accelerometer interconnect cable
Bently Nevada 200151-20-03-00 is a Trendmaster accelerometer interconnect cable. It connects a compatible Trendmaster accelerometer to the supported signal interface. The cable carries the sensor connection rather than performing measurement or signal processing, so the selected transducer, interface and mounting hardware must be checked as a complete arrangement.
The order selects 2.0 m of blue armored interconnect cable with standard coupling nuts. Use appropriate mating hardware for the connector IP67 rating. Maintain the specified bend radius and avoid cable flexing below the stated handling temperature.
The order selects 2.0 m of blue armored interconnect cable with standard coupling nuts. Use appropriate mating hardware for the connector IP67 rating. Maintain the specified bend radius and avoid cable flexing below the stated handling temperature.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 200151-20-03-00 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · PULP & PAPER
Pulp Manufacturing and Paper Production
Pulp refiners and process pumps in integrated pulp mills.Paper machine press rolls and winders in papermaking facilities. -
02 · WATER & WASTEWATER
Municipal Wastewater Collection and Treatment
Sewage lift pumps serving municipal wastewater collection and treatment.Aeration blowers and sludge equipment in wastewater treatment plants. -
03 · POWER GENERATION
Electricity Generation and Power Plant Utilities
Gas and steam turbine generators in thermal power plants.Hydroelectric turbines and generators in conventional hydropower generating stations.
Technical specifications for 200151-20-03-00
-
Product Model200151-20-03-00
-
Product ParametersArmored accelerometer interconnect cable
-
In stock9 units
-
ManufacturerBently Nevada
-
Nominal cable length2.0 m
-
Cable selection03; blue armored
-
Coupling nut option00; standard
-
ConductorsFour conductors, 22 AWG
-
Shield constructionBraided shield and drain, at least 85% coverage
-
Jacket materialPVC
-
Coupling nut finishNickel plated
-
TerminationsConnectors at both ends
-
Connector ingress protectionIP67 when mated to appropriate hardware
-
Operating temperature-20 to +100 deg C
-
Low-temperature handlingBelow -20 deg C only without flexing or bending
-
Minimum bend radius63.5 mm
-
Sensor family200150 / 200155 / 200157 accelerometers
View all additional
Alternative Names
200151 20 03 00
200151-20-03-00 Trendmaster accelerometer interconnect cable
Bently Nevada 200151-20-03-00
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
ARMORED ACCELEROMETER INTERCONNECT CABLE
Integrating 200151-20-03-00
It connects a compatible Trendmaster accelerometer to the supported signal interface. The cable carries the sensor connection rather than performing measurement or signal processing, so the selected transducer, interface and mounting hardware must be checked as a complete arrangement.
Select the 200150, 200155 or 200157 sensor and corresponding channel deliberately. Connection to a ProTIM installation may require the documented interface adapter; a matching connector does not eliminate the system hardware and cable-length checks.
Maintain a bend radius of at least 63.5 mm and secure the route against damage. The IP67 statement applies to connectors mated with appropriate hardware; it does not establish an ingress rating for an incomplete cable connection.
Features:
- Match complete order, mounting, connections and environmental limits
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 200151-20-03-00 Trendmaster accelerometer interconnect cable requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 200151-20-03-00 requires comparing complete order, mounting, connections and environmental limits. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Select the 200150, 200155 or 200157 sensor and corresponding channel deliberately. Connection to a ProTIM installation may require the documented interface adapter; a matching connector does not eliminate the system hardware and cable-length checks.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 200151-20-03-00 Trendmaster accelerometer interconnect cable requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 200151-20-03-00 Trendmaster accelerometer interconnect cable must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size4x3.4x6.2cm
-
Shipping weight0.1 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 200151-20-03-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is 200151-20-03-00?
It connects a compatible Trendmaster accelerometer to the supported signal interface. The cable carries the sensor connection rather than performing measurement or signal processing, so the selected transducer, interface and mounting hardware must be checked as a complete arrangement. -
Which options identify this 200151 configuration?
The order selects 2.0 m of blue armored interconnect cable with standard coupling nuts. Use appropriate mating hardware for the connector IP67 rating. Maintain the specified bend radius and avoid cable flexing below the stated handling temperature. -
Which system compatibility checks are required?
Select the 200150, 200155 or 200157 sensor and corresponding channel deliberately. Connection to a ProTIM installation may require the documented interface adapter; a matching connector does not eliminate the system hardware and cable-length checks. -
Which machine monitoring applications can this cable support?
With the correct sensor and processing channel, documented uses include general casing vibration, fin-fan or slow-shaft monitoring, and rolling-element bearing condition monitoring. The cable itself does not measure or process vibration. -
What installation precautions apply to this configuration?
Maintain a bend radius of at least 63.5 mm and secure the route against damage. The IP67 statement applies to connectors mated with appropriate hardware; it does not establish an ingress rating for an incomplete cable connection. -
Can a similar part number be substituted directly?
No. Compare complete order, mounting, connections and environmental limits. Select the 200150, 200155 or 200157 sensor and corresponding channel deliberately. Connection to a ProTIM installation may require the documented interface adapter; a matching connector does not eliminate the system hardware and cable-length checks. -
Are hardware revisions or a direct successor confirmed?
No exact-order hardware revision, discontinuation date or manufacturer-designated successor has been verified. The reference document revision is not the supplied product hardware revision.
READY TO VERIFY YOUR PART?
Get a 200151-20-03-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
200151-20-03-00Armored accelerometer interconnect cableManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
