AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Ships by Tuesday, July 28
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 200150-14-CN
-
Product Model200150-14-CN
-
Product ParametersGeneral Purpose Trendmaster 2000 orTrendmaster Pro Accelerometer
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size4x3.4x6.2cm
-
ManufacturerBently Nevada
-
Weight0.1 kg
-
Mounting Stud Option3/8-24 to 3/8-24 UNF, 3/4 inchhex stud
-
ApprovalsMultiple Approvals
-
Housing and connector material316L stainless steel
-
Measurement Range inmm/s2 (mg)14.7 (1.5)
-
Settling Time≤300
-
Frequency Range in Hz10 to 1000 (600 to 60,000)
-
ExcitationVoltage4.7 to 5.5 Vdc
-
QuiescentCurrent<800 µA
-
Output BiasVoltage+2.5 ± 0.23 Vdc
Description
The BENTLY NEVADA 200150-14-CN General Purpose Trendmaster 2000 or Trendmaster Pro Accelerometer is for measuring vibration acceleration on industrial machinery. The accelerometer is intended for use with compatible Bently Nevada monitoring systems, including Trendmaster ProTIMs and the Trendmaster 2000 system. The 200150 model can also interface with the 200100 Dual Acceleration to Velocity flexiTIM Module, 89130-01 Acceleration-to-Velocity TIM, and compatible 1900/25 and 1900/27 monitors.
The accelerometer uses a piezoelectric sensing element. When the sensor is subjected to mechanical vibration, the piezoelectric element generates an electrical charge. Internal electronics convert this signal into a differential voltage output proportional to the acceleration acting parallel to the sensor's sensitive axis. This output can be processed by the connected Bently Nevada monitoring system for machinery vibration measurement and condition monitoring.
The 200150 Accelerometer also operates with theTrendmaster 2000 system. The accelerometer interfaces withthe 200100 Dual Acceleration to Velocity flexiTIM Module andthe 89130-01 Acceleration-to-Velocity TIM (TransducerInterface Module), as well as the 1900/25 and 1900/27monitors.
The accelerometer uses a piezoelectric sensing element. When the sensor is subjected to mechanical vibration, the piezoelectric element generates an electrical charge. Internal electronics convert this signal into a differential voltage output proportional to the acceleration acting parallel to the sensor's sensitive axis. This output can be processed by the connected Bently Nevada monitoring system for machinery vibration measurement and condition monitoring.
The 200150 Accelerometer also operates with theTrendmaster 2000 system. The accelerometer interfaces withthe 200100 Dual Acceleration to Velocity flexiTIM Module andthe 89130-01 Acceleration-to-Velocity TIM (TransducerInterface Module), as well as the 1900/25 and 1900/27monitors.
Information
Overview
Manuals
Application Notes
Product Applications
Electrical Connection & Cabling
Features:
- General Purpose Trendmaster 2000 or Trendmaster Pro Accelerometer
- 3/8-24 to 3/8-24 UNF Mounting Stud with 3/4 Inch Hex
- Hermetically Sealed 316L Stainless Steel Case
- Top-Mounted 5-Pin Connector
The 200150-14-CN features a hermetically sealed, 316L stainless steel case. This design provides an extremely rugged transducer that is well suited for harsh industrial environments. The 200150-14-CN has a top-mounted 5-pin connector that allows easy installation and removal of the interconnecting signal cable. The 200150-14-CN has a 3/8-24 female threaded hole on the bottom of the sensor's casing that accommodates several mounting options.
The 200150-14-CN BENTLY NEVADA General Purpose Trendmaster 2000 orTrendmaster Pro Accelerometerr may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
BENTLY NEVADA 200150-14-CN General Purpose Trendmaster 2000 orTrendmaster Pro Accelerometer Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The -14 mounting option specifies a 3/8-24 to 3/8-24 UNF, 3/4-inch hex stud. This mounting configuration provides a threaded mechanical connection between the accelerometer and the machine or mounting surface. The sensor housing incorporates a 3/8-24 female threaded mounting interface, allowing the accelerometer to be installed with the specified mounting hardware.
The accelerometer features a hermetically sealed 316L stainless-steel housing, providing a rugged construction suitable for harsh industrial environments. A top-mounted 5-pin connector enables convenient installation and removal of the interconnecting signal cable.
The 200150-14-CN provides a mounted resonant frequency greater than 20 kHz, amplitude linearity of ±2%, transverse sensitivity of ≤7%, quiescent current of less than 800 μA, and an output bias voltage of +2.5 ±0.23 VDC. The specified operating temperature range is -55°C to +121°C.
The CN suffix identifies the country-specific approval configuration. The applicable approval requirements should be verified for the installation location and operating environment before installation.
- Oil & Gas: Monitors vibration on compressors, pumps, and turbines
- Power Generation: Tracks seismic casing vibration on high-speed rotating equipment and fans
- Petrochemical/Chemical: Continuous monitoring in hazardous/corrosive environments with agency approvals
- Pulp/Paper/Water: General health assessments for gearboxes, pumps, and motors
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Connector Interface: The top termination features a 5-pin 1/2-20 connector.Environmental Protection: For harsh or humid field environments, apply Dow Corning DC4 electrical insulating compound into the connector sockets before mating.
This seals out moisture and mitigates thermal shock.
Compatible Cabling: Connect the sensor using a Bently Nevada 200151 (dual-ended) or 200152 (single-ended) standard interface cable.
System Routing: Route the cable directly to a Trendmaster proTIM (Processor Transmitter Interface Module), such as the 200200 or 200250 modules, which supply power and process the differential signal.
Alternative Names
200150-I4-CN
20015O-14-CN
200I50-14-CN
2OO150-14-CN
200150 14 CN
200150 I4 CN
20015O 14 CN
200I50 14 CN
2OO150 14 CN
200150-14-05
Technical notes
The 200150-14-CN has an operating temperature range of -40°C to +105°C (-40°F to +221°F). The 200150-14-CN has hermetic sealing of 5×10⁻⁸ atm·cc/s (3.1×10⁻⁹ atm·in³/s) maximum. The 200150-14-CN can operate at 100% relative humidity, condensing, non-submerged conditions.The 200150-14-CN features a 3/8-24 to 3/8-24 UNF mounting stud with 3/4 inch hex (Option 14), with a stud length of 6.1 mm (0.240 in).
FAQs
-
What systems is this accelerometer compatible with?
+The 200150 series is engineered to interface directly with Bently Nevada condition monitoring platforms, including proTIM modules, the 89130-01 Acceleration-to-Velocity TIM, and 1900/25 or 1900/27 vibration monitors. -
How do you protect the top connector from moisture?
+The sensor links via a top-mounted 5-pin connector. To protect the interface from moisture or thermal shock, it is highly recommended to apply an electrical insulating compound (such as Dow Corning DC4) directly into the connector sockets before locking it down.. -
What systems is this sensor compatible with?
+It is engineered to interface directly with the Bently Nevada 200200 proTIM-R, 200250 proTIM-C, 200100 Dual Accel-to-Velocity flexiTIM, and the 1900/25 or 1900/27 standalone monitors.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
-
-
-
-
-
-
-
-
200150-22-CNGeneral Purpose Trendmaster 2000 orTrendmaster Pro AccelerometerManufacturer: Bently NevadaView Details
-
Product
Product Browsing History
-
200150-14-CNGeneral Purpose Trendmaster 2000 orTrendmaster Pro AccelerometerManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
