AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Ships by Tuesday, September 1
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 200155-00-CN
-
Product Model200155-00-CN
-
Product ParametersLow-frequency industrial accelerometer
-
Tariff Code9031809090
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size4.57x1.75x1.75cm
-
ManufacturerBently Nevada
-
Weight0.06 kg
-
Product TypeLow-frequency Trendmaster Pro accelerometer
-
Measurement Range±196 m/s² (±20 g)
-
Sensitivity10.2 mV/(m/s²) (100 mV/g)
-
Recommended Frequency UseFrequencies below 10 Hz
-
Mounting Stud OptionNo mounting stud provided
-
Mounting Thread3/8-24 female
-
ConnectorTop-mounted 5-pin 1/2-20
-
Housing MaterialHermetically sealed 316L stainless steel
-
Operating Temperature-40 to +105 °C
-
Maximum Cable Length15.24 m (50 ft)
Description
Bently Nevada 200155-00-CN is a low-frequency case-mounted piezoelectric accelerometer from the 200150, 200155 and 200157 family for Trendmaster Pro condition-monitoring applications.
The unit provides a ±196 m/s² (±20 g) measurement range, 10.2 mV/(m/s²) sensitivity, a top-mounted 5-pin connector, and a hermetically sealed 316L stainless-steel case; verify mounting, cable length, frequency range, and channel compatibility before installation.
The unit provides a ±196 m/s² (±20 g) measurement range, 10.2 mV/(m/s²) sensitivity, a top-mounted 5-pin connector, and a hermetically sealed 316L stainless-steel case; verify mounting, cable length, frequency range, and channel compatibility before installation.
Information
Overview
Manuals
Product Applications
Compatibility
Lifecycle & Replacement
Features:
- Low-frequency Trendmaster Pro accelerometer
- ±196 m/s² (±20 g) measurement range
- 10.2 mV/(m/s²) (100 mV/g) sensitivity
- Hermetically sealed 316L stainless-steel case
- Top-mounted 5-pin connector with 3/8-24 mounting interface
The sensor provides a ±196 m/s² (±20 g) measurement range and 10.2 mV/(m/s²) (100 mV/g) sensitivity through a top-mounted 5-pin connector. Verify the 3/8-24 mounting interface, cable length, channel configuration and controlled Bently Nevada documentation before commissioning.
200155-00-CN Bently Nevada: Verify the exact model, no-stud 00 option, connector, mounting interface, compatible Trendmaster Pro channel and controlled manufacturer documentation before installation or replacement.
Bently Nevada 200155-00-CN Low-Frequency Trendmaster Pro Accelerometer Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
- Low-frequency casing acceleration measurement
- Bearing-housing vibration monitoring
- Trendmaster Pro condition-monitoring points
- Acceleration-to-velocity channel measurement
- Low-speed rotating-equipment vibration monitoring
Use 200155-00-CN only with a compatible Trendmaster Pro low-frequency channel identified by the complete sensor and monitor configuration.
Match the complete 200155-00-CN order code and no-stud 00 option.
Confirm the 3/8-24 mounting interface and machine-side mounting hardware.
Verify the top-mounted 5-pin connector, field cable type and maximum 15.24 m cable length.
Check the configured 100 mV/g sensitivity, measurement range and frequencies below 10 Hz.
Do not treat another 20015x accelerometer as interchangeable without controlled Bently Nevada verification.
Match the complete 200155-00-CN order code and no-stud 00 option.
Confirm the 3/8-24 mounting interface and machine-side mounting hardware.
Verify the top-mounted 5-pin connector, field cable type and maximum 15.24 m cable length.
Check the configured 100 mV/g sensitivity, measurement range and frequencies below 10 Hz.
Do not treat another 20015x accelerometer as interchangeable without controlled Bently Nevada verification.
Confirm the complete 200155-00-CN order code before replacement because the mounting-stud and approval options affect the supplied configuration.
Record the installed sensor model, channel type, sensitivity, cable length and mounting hardware.
Inspect the connector, housing, mounting threads, cable and mounting surface.
Preserve the configured low-frequency acceleration or acceleration-to-velocity channel settings.
Verify current Bently Nevada documentation and site approval requirements.
Contact Amikon with 200155-00-CN for availability and replacement support.
Record the installed sensor model, channel type, sensitivity, cable length and mounting hardware.
Inspect the connector, housing, mounting threads, cable and mounting surface.
Preserve the configured low-frequency acceleration or acceleration-to-velocity channel settings.
Verify current Bently Nevada documentation and site approval requirements.
Contact Amikon with 200155-00-CN for availability and replacement support.
Alternative Names
200155-00-CN
20015x Low-Frequency Accelerometer
Trendmaster Pro Low-Frequency Seismic Transducer
Technical notes
The 200155-00-CN is intended for low-frequency Trendmaster Pro vibration monitoring. Confirm channel configuration, mounting surface, cable length, connector condition and signal scaling before commissioning.
FAQs
-
Is 200155-00-CN suitable for a Trendmaster Pro low-frequency channel?
+Yes, when the installed Trendmaster Pro channel is configured for the low-frequency accelerometer option. Verify the monitor or ProTIM channel type, connector and configured sensitivity before ordering. -
Why is this model selected for slow-rotating equipment?
+The 200155 family is intended for lower-frequency vibration measurements, including fin-fan and other slow-rotating shaft applications. Confirm that the expected vibration content is below 10 Hz and within the ±20 g range. -
What does the 00 mounting-stud option mean for an MRO order?
+The 00 option means no mounting stud is supplied. Procurement should identify the required stud separately and confirm the machine-side thread and mounting surface before shipment. -
Can an existing 20015x field cable be reused with this accelerometer?
+Reuse depends on cable type, connector condition and total length. Confirm a compatible 5-pin connection and keep the complete cable run within 15.24 m (50 ft). -
Which mounting checks are required before replacing the sensor?
+Check that the mounting location has a clean, flat surface and the correct 3/8-24 interface. Apply the documented mounting torque and avoid side loading or cable strain. -
How should a system integrator validate the channel scaling?
+Configure the input for 10.2 mV/(m/s²), equivalent to 100 mV/g, then compare the displayed signal with a known reference or the previous validated channel setup. -
What should be inspected when 200155-00-CN arrives?
+Verify the complete 200155-00-CN label, stainless-steel case, 5-pin connector, mounting interface and shipping condition. Record any connector or housing damage before installation. -
Which functional tests should be completed after installation?
+After mounting, verify bias or channel health, noise level, acceleration response, converted velocity trend if used, alarm behavior and stable readings at normal machine speed.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
-
-
-
-
-
200150-22-CNGeneral Purpose Trendmaster 2000 orTrendmaster Pro AccelerometerManufacturer: Bently NevadaView Details
-
200151-60-03-00Accelerometer Interface Standard Cable,Connectors on Both EndsManufacturer: Bently NevadaView Details
-
200150-14-CNGeneral Purpose Trendmaster 2000 orTrendmaster Pro AccelerometerManufacturer: Bently NevadaView Details
-
-
200152-XX-XX-XX MOD：323357-10-03-10Modified accelerometer interface cableManufacturer: Bently NevadaView Details
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
