AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Ships by Tuesday, September 1
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 200151-40-03-00
-
Product Model200151-40-03-00
-
Product ParametersAccelerometer interface armored cable
-
Tariff Code8544422900
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size4x3.4x6.2cm
-
ManufacturerBently Nevada
-
Weight0.1 kg
-
Product TypeAccelerometer interface cable with connectors on both ends
-
Cable Length Option4.0 m
-
Cable Type OptionBlue armored cable
-
Coupling Nut OptionStandard coupling nut
-
Connector ConfigurationMolded connectors on both ends
-
Cable ConductorsFour-conductor 22 AWG
-
ShieldingBraided shield with drain wire, 85% minimum coverage
-
Outer JacketPVC
-
Connector Seal RatingIP67 when properly installed
-
Minimum Bend Radius63.5 mm (2.5 in)
Description
Bently Nevada 200151-40-03-00 is a 4.0 m accelerometer interface standard cable with molded connectors on both ends, blue armor and standard coupling nuts for the 20015x accelerometer family.
The four-conductor 22 AWG cable uses a braided shield and PVC outer jacket; maintain the 63.5 mm minimum bend radius and verify connector fit, cable routing and system configuration before installation.
The four-conductor 22 AWG cable uses a braided shield and PVC outer jacket; maintain the 63.5 mm minimum bend radius and verify connector fit, cable routing and system configuration before installation.
Information
Overview
Manuals
Product Applications
Compatibility
Lifecycle & Replacement
Features:
- 4.0 m accelerometer interface cable
- Molded connectors on both ends
- Blue armored cable construction
- Standard coupling nuts
- 63.5 mm minimum bend radius
The four-conductor 22 AWG cable uses a braided shield, drain wire and PVC outer jacket. Properly installed connectors provide an IP67 seal; verify the installed accelerometer, interface, cable routing and coupling-nut arrangement before commissioning.
200151-40-03-00 Bently Nevada: Verify the exact cable length, armor option, coupling-nut option, connector arrangement and documented 20015x system configuration before installation or replacement.
Bently Nevada 200151-40-03-00 20015x Accelerometer Interface Cable Manuals, Datasheets, Official Documents, LinksImportant Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
- Interconnecting a documented 20015x accelerometer with its monitoring interface
- Routing accelerometer signals through exposed machinery areas requiring armored cable
- Connecting case-mounted seismic transducers in Trendmaster ProTIM installations
- Connecting documented 200150 channels in Trendmaster 2000 installations
- Replacing an installed 4.0 m dual-connector accelerometer cable
Use 200151-40-03-00 only with the compatible Bently Nevada 20015x accelerometer installation identified by the complete cable and system configuration.
Match the complete 200151-40-03-00 order code, not cable color alone.
Confirm that the installation requires molded connectors on both ends.
Verify the 4.0 m cable length, blue armor and standard coupling nuts.
Check the installed accelerometer, monitor or Trendmaster interface and permitted total cable length.
Do not substitute a 200152 single-ended cable or another length without controlled Bently Nevada verification.
Match the complete 200151-40-03-00 order code, not cable color alone.
Confirm that the installation requires molded connectors on both ends.
Verify the 4.0 m cable length, blue armor and standard coupling nuts.
Check the installed accelerometer, monitor or Trendmaster interface and permitted total cable length.
Do not substitute a 200152 single-ended cable or another length without controlled Bently Nevada verification.
Confirm the complete 200151-40-03-00 order code before replacement because cable length, armor and coupling-nut options change the installed configuration.
Record the installed accelerometer, monitoring interface and connector arrangement.
Inspect both molded connectors, coupling nuts, armor and PVC outer jacket.
Preserve the 63.5 mm minimum bend radius and documented cable-length limits.
Verify current Bently Nevada documentation before altering an installed channel.
Contact Amikon with 200151-40-03-00 for availability and replacement support.
Record the installed accelerometer, monitoring interface and connector arrangement.
Inspect both molded connectors, coupling nuts, armor and PVC outer jacket.
Preserve the 63.5 mm minimum bend radius and documented cable-length limits.
Verify current Bently Nevada documentation before altering an installed channel.
Contact Amikon with 200151-40-03-00 for availability and replacement support.
Alternative Names
200151-40-03-00
20015x Accelerometer Interface Cable
4 m Blue Armored Dual-Connector Cable
Technical notes
Verify the complete order code, the 4.0 m cable length, blue armor, coupling-nut option and connector configuration before installation. Maintain the published minimum bend radius and follow the applicable Bently Nevada wiring and site safety procedures.
FAQs
-
What does the 40-03-00 configuration specify for 200151?
+Option 40 specifies 4.0 m, option 03 specifies blue cable with armor, and option 00 specifies the standard coupling nut. Verify the complete order code rather than cable color alone. -
Can 200151-40-03-00 be replaced by a 200152 cable of the same length?
+No. The 200151 cable has connectors on both ends, while the documented 200152 configuration has a connector on the accelerometer end only. Confirm both connector ends and coupling-nut requirements. -
Which accelerometer installations should be checked before ordering this cable?
+Check the exact installed 20015x accelerometer, monitor or Trendmaster interface, connector arrangement, required cable length and routing environment. The complete installed configuration must match the official datasheet. -
How should the blue armored cable be routed around machinery and cabinet entries?
+Maintain the 63.5 mm minimum bend radius, protect connector exits and avoid flexing or bending below -20 °C. Do not crush the armor or use tight clamps that deform the cable. -
What details should an MRO buyer provide for an urgent quotation?
+Provide the complete model, quantity, photos of both connectors and coupling nuts, the installed accelerometer and interface model, required cable length, destination country and the shutdown deadline. -
Which conditions should be inspected when the cable arrives?
+Confirm the complete model, 4.0 m length, blue armor, standard coupling nuts and molded connectors. Reject cut jackets, crushed armor, bent pins, contaminated contacts or transport damage. -
What functional checks are required after connecting 200151-40-03-00?
+Secure both connectors correctly, confirm the IP67 seal condition, check channel baseline and signal stability, and verify the monitoring channel and alarms before returning the machine to service. -
Can an additional extension be added when more than 4.0 m is required?
+Do not add an unapproved extension merely to reach the required distance. Select the documented cable length and connector configuration that suits the installation and remains within the system cable limits.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
-
-
-
-
-
200150-22-CNGeneral Purpose Trendmaster 2000 orTrendmaster Pro AccelerometerManufacturer: Bently NevadaView Details
-
-
200150-09-05General Purpose Trendmaster 2000 orTrendmaster Pro AccelerometerManufacturer: Bently NevadaView Details
-
200150-14-CNGeneral Purpose Trendmaster 2000 orTrendmaster Pro AccelerometerManufacturer: Bently NevadaView Details
-
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
